2014 Toyota Tacoma Accessories

change vehicle




2014 Toyota Tacoma Videos

SportRack Platform Style 2 Bike Rack Review - 2014 Toyota Tacoma

Today on our 2014 Toyota Tacoma, we'll be test fitting the sport rack, platform style hitch mounted 2 bike rack, part number SR2901. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolt and tighten it down, using a wrench. The bike rack's secured. We'll go over a few clearance measurements and see how the two fit together. We have about 20 1/2 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 7 inches.



Prorack 4 Hitch Bike Rack Review - 2014 Toyota Tacoma

Today on our 2014 Toyota Tacoma, well be test fitting the ProRack Hitch Mounted Four Bike Rack, part number PR8062404. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch, and thread our anti-rattle bolt through the pin holes and tighten it down with a wrench. If the bike rack secured, well go over a few clearance of measurements to see how the two fit together. We have about 17 inches of ground clearance at the back of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about 5 inches away, and weve added about 30 inches to the overall length of our vehicle. To access the bed of the truck, we can pull this over pin at the base of the bike rack and tilt the mast down, and we can easily have access to the trucks bed. To load up a bike, well make sure the mast is in its upright position.



Yakima HoldUp 2 Hitch Bike Rack Review - 2014 Toyota Tacoma

Today on our 2014 Toyota Tacoma, well be test fitting the Yakima HoldUp Hitch Mounted Two Bike Rack, part number Y02443. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well thread in our anti-rattle bolt and tighten it down using a wrench. With the bike rack secured, well go over a few clearance of measurements to see how the two fit together. We have about 21 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 5 inches away.



Thule T2 Platform Style Hitch Bike Rack Review - 2014 Toyota Tacoma

Today on our 2014 Toyota Tacoma, we'll be test fitting the Thule T2 platform style hitch mounted two bike rack part number TH916XTR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 17 and a half inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 7 and a half inches away and we've added about 13 inches to the overall length of our Tacoma. We can now lower the platform down by pulling up on the gray lever at the base of the bike rack and tilting the platform down. With the platform down we have about 24 and a half inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 5 inches away and we've added about 32 inches to the overall length of our Toyota Tacoma.



Thule Doubletrack Hitch Bike Rack Review - 2014 Toyota Tacoma

Today on our 2014 Toyota Tacoma, we'll be test fitting the Thule Doubletrack platform style hitch mounted two bike rack part number TH990XT. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti rattle bolt and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 17 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 5 inches away and we've added about 11 inches to the overall length of our Tacoma. We can now lift up on the gray lever at the base of the bike rack and tilt the platform down. With the platform down, we have about 24 inches of ground clearance at the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about 3 inches away and we've added about 29 and a half inches to the overall length of our Toyota Tacoma.



Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2014 Toyota Tacoma

Today on our 2014 Toyota Tacoma, we'll be test fitting the Swagman XTC2 platform style two bike rack part number S64670. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti rattle bolt, tighten it down with the wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 22 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 6 inches and we've added about 20 and a half inches to the overall length of our Tacoma. We can now pull the three pins at the base of the bike rack to tilt down the platform as well as the mast. With it down, you can see the tail gate does come in contact with the bike rack. With the platform down, the closest part of the bike rack to the closest part of the vehicle is still about 6 inches.



SportRack 3 Bike Rack Review - 2014 Toyota Tacoma

Today on our 2014 Toyota Tacoma, we'll be testing the sports rack hitch-mounted three-bike rack, part number sr2403. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in the anti-rattle bolts, and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 17-1/2 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about four inches away, and we've added about 12 inches to the overall length of our Ticoma.





TrailSeal Tailgate Gasket Installation - 2014 Toyota Tacoma

Today on this 2014 Toyota Tacoma, were going to install part number 834532001583. This is the TrailSeal tailgate gasket. To start off our install well go ahead and open up the tailgate. Then well go ahead and clean up the inside edge of the tailgate, all the way around. Well go ahead and use the alcohol prep kits that come with the package. Next well go ahead and take a piece of our seal and cut off about a one inch length.



BAKFlip G2 Hard Tonneau Cover Installation - 2014 Toyota Tacoma

Today in this 2014 Toyota Tacoma, we're going to install part number BAK26407. First thing we're going to do is go ahead and install our hardware for our rails. We're going to slide the square headed bolts into the tracks that are already installed into the bed of the pick up truck. In this truck, we're going to use three on each side. Now, we'll go ahead and attach our rail into the truck. We'll go ahead and slide it forward as far as possible.



Extang Revolution Soft Tonneau Cover Installation - 2014 Toyota Tacoma

Today on this 2014 Toyota Tacoma, we'll be installing the Extang Revolution tonneau cover part number Ex54915. To begin our install, we'll go to the rails here in the bed of the truck and remove the in caps. We'll take three blocks from our install kit and slide them into position. We'll repeat this on the other side of the truck bed. Next, we'll move on to the rails from our tonneau cover, we'll first remove adhesive strips off the foam on the sides of the rails. Next we'll install plates into the rails. You want to make sure that the flat side of the plate goes against a rail.





2014 Toyota Tacoma Questions and Answers


  • Parts Needed to Convert Boat Trailer from Surge Disc Brakes to Electric-Over-Hydraulic Disc Brakes
  • A good starting point for your project to convert your tandem boat trailer from surge disc brakes to electric-over-hydraulic disc brakes is a read of the linked article, which covers this process completely. For a brake controller I recommend the Tekonsha Prodigy P2 # 90885; this is among the most popular and reliable units we offer and it will work with both electric brakes and electric over hydraulic (EOH) systems. You'll use quick-connect harness # 3040-P to plug the controller in...
    view full answer...

  • Bull Bars/Grille Guards for 2014 Toyota Tacoma That Do Not Require Removal of Factory Skid Plate
  • All of the bull bars and grille guards offered for your 2014 Toyota Tacoma will require removal of the factory skid plate for installation. However, the skid plate may be re-installed after some necessary trimming to accommodate the mounting points for the bull bar. Westin offers their Ultimate Bull Bar in both chrome-plated-steel, part # 32-1600, and in black powder-coat finish on steel, part # 32-1605. My contact there confirmed these will fit your 2014 Tacoma. The installation instructions...
    view full answer...

  • Trailer Brake Controller Installation on a 2014 Toyota Tacoma Pre Runner Without Tow Package
  • I checked your recent order and I see the components you already have: Curt 4-Pole to 7-Pole Adapter # C57674 and Tow Ready T-One Vehicle Wiring Harness # 118496. Since you have an under-dash brake control port you can use a plug-and-play harness to connect a brake controller such as the Prodigy P2, part # 90885, which is one of the most popular and reliable proportional brake controllers we offer. First I suggest you test the under-dash port to ensure it is active. The presence of wiring...
    view full answer...

  • Will TracRac TracONE Fixed-Mount Truck Bed Ladder Rack # TA27000-01 Fit 2014 Toyota Tacoma 5-ft Bed
  • According to my contact at TracRac their TracONE Fixed-Mount Truck Bed Ladder Rack # TA27000-01 will fit your 2014 Toyota Tacoma with 5-foot bed if used along with the Tacoma Mount Kit # TA34000. This system offers near-universal fit on a variety of trucks and includes heavy-duty tie-down loops and lightweight powder-coated aerodynamic aluminum crossbars. The rack is USA-made and carries a limited lifetime warranty. We also offer Aluminum Load Stops # TA25110 for use with this system. I...
    view full answer...

  • Largest Available Tool Box for 2014 Toyota Tacoma
  • DeeZee offers some 7.1 cubic foot toolboxes that would be a fit for the bed of your 2014 Tacoma. Their Red Label model is available in a black powder coat finish as part # DZ8160B or a bright aluminum finish as part # DZ8160. These boxes are 60 inches by 20 inches long at the top, and would extend 5-1/4 inches into the truck bed below the rail. It sounds as if you were looking for something that would extend down into the bed further, but these size boxes are the only ones we offer that...
    view full answer...

  • Will the Tekonsha Plug-In Wiring Adapter # 3040-P Work on a 2014 Toyota Tacoma
  • The Tekonsha Plug-In Wiring Adapter, # 3040-P, will work on your 2014 Toyota Tacoma as long as your truck came with a factory installed trailer wiring. The factory connector for this harness is located just above the emergency brake pedal. If you are looking for a brake controller as well, I recommend the Tekonsha Prodigy P2 Brake Controller, # 90885. This is one of the most popular brake controllers on the market. I have attached an installation video of this brake controller and the...
    view full answer...

  • Availability of Truck Bed Mat for 2014 Toyota Tacoma with OEM Plastic Bed Liner
  • BedRug does offer a bed mat that's compatible with the 2014 Tacoma, but nothing that will work with the factory plastic bed liner. Access makes a custom bed mat, part # A25050179 that is compatible with spray-in or plastic bed liners, which is what I'd recommend. I've linked the installation instructions for you to review.
    view full answer...

  • Adding 7-Way Trailer Connector to 2014 Toyota Tacoma without Factory Tow Package
  • It sounds like your 2014 Toyota Tacoma did not come with a factory tow package. What can happen sometimes is that on models that did not come with the factory tow package not all of the wiring or contacts will be present. You would either need to by all of the tow package parts or you would need to return the harness and install an aftermarket one designed for models without the factory tow package. If you want to add a 7-Way to the truck you would start by installing a 4-Way using #...
    view full answer...

  • Installing a Trailer Brake Controller on a 2014 Toyota Tacoma
  • If your 2014 Toyota Tacoma came with a factory installed 7-Way trailer connector then the plug-in for a brake controller should be there. Harness # 3040-P is the correct one for your truck and a Tekonsha brake controller. I recommend the P2 # 90885 because it is easy to set up and use and it is reliable. I have linked a video to the right that shows where the controller plugs in. This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The...
    view full answer...

  • Will Supplemental Braking System and Tow Bar Wiring from RV Overload Brake Lights on Toyota Tacoma
  • Both a brake light signal from the motor home and the brake signal from the vehicle are 12 volt systems. If both are supplying power at the same time to the same circuit it would not overload it because it would not double up the power to 24 volts. You may need a brake light relay # RM-88400 to keep the Tacoma brake signal from overriding the turn signal sent by your RV. The relay is needed on towed cars with combined lighting if you are using a supplemental braking system. Combined...
    view full answer...

  • Will the Pop & Lock Custom Tailgate Lock # PAL8540 Fit a 2014 Toyota Tacoma with Backup Camera
  • Yes, the Pop & Lock Custom Tailgate Lock, # PAL8540, will fit your 2014 Toyota Tacoma with the backup camera. I verified this with my contact at Pop & Lock. There is a small cap next to the handle on this tailgate lock that would be removed if you have the camera.
    view full answer...

  • Will Locking Tailgate Handle, Part # PAL5400, Work with Backup Camera on 2014 Toyota Tacoma
  • For your 2014 Toyota Tacoma with a backup camera you would want the Pop and Lock Tailgate Lock part # PAL5400. This handle will replace your current handle and has a knockout that will allow your factory backup camera to slip through and be fully functional. What is also nice about this handle is that it can be keyed to match your vehicle's key.
    view full answer...

  • Truck Bed Ladder Rack For 2014 Toyota Tacoma
  • For your 2014 Toyota Tacoma both the TracONE Truck Bed Ladder Rack, part # TA27000-01, and the Thule Xsporter Pro, part # TH500XT are confirmed as a fit. If you are not planning on carrying extremely heavy loads I recommend the Thule Xsporter, part # TH500XT. It has an adjustable height that allows you to load items at a height that is much easier to reach. It will adjust to 32 different heights for ultimate versatility. This ladder rack system has a 450 lb weight carrying capacity....
    view full answer...

  • 2014 Toyota Tacoma Vehicle Suspension Enhancement Recommendation to Prevent Compression or Sagging
  • According to my contacts at Super Springs both the # SSA7 or # SSA1 are confirmed as fit for your 2014 Toyota Tacoma 2 Wheel Drive Access model. However, if you have a Pre-Runner edition of this truck, then the # SSA19 is what you will need. You are correct that the Super Springs # SSA7 is a heavier duty application suspension stabilizer and this will engage when the vehicle suspension is under a load and it will not engage until the vehicle suspension is placed under an additional...
    view full answer...

  • Will Curt Bumper Mount Trailer Hitch Fit a 2014 Toyota Tacoma Step Bumper
  • You have to go by the dimensions of the Curt trailer hitch # E-3S to determine fit. The flat part of the mounting surface is 11 inches across and 4 inches front to back. The smaller holes on top are 6 inches apart on center and the larger holes are 8-3/4 inches apart on center. I recommend a frame mount hitch # 87581 for your 2014 Toyota Tacoma. No drilling is required for this installation. I have included a link to the installation instructions and a link to a video showing installation...
    view full answer...

  • What Parts Needed to Equip 2014 Toyota Tacoma to Tow Trailer With Electric Brakes
  • The items needed to tow a trailer with electric brakes include the hitch, ball mount and hitch ball (that you already have), wiring harness, and brake controller with install kit. The linked articles on towing and brake controllers will give you some useful detail on these items and on towing techniques. For a hitch I suggest the Curt 2-inch Class III hitch # 13323; this will fit both X-Runner and non-X-Runner models. The installation instructions are attached along with a video and...
    view full answer...

  • Will 2-5/8-Inch Span Anti-Rattle Hitch Lock # 63232 Fit 2014 Toyota Tacoma Factory Hitch Receiver
  • The Anti-Rattle Trailer Hitch Receiver Lock you referenced, part # 63232 from Lets Go Aero, has a center span of 2-1/2 inches, which is not wide enough for the OEM hitch on your 2014 Tacoma. We do offer hitch locks that have longer center spans that will work with the wider hitch receiver tube on your Tacoma. Deadbolt offers their extra-long hitch lock, part # RH5-XL, which is rated highly enough for even Class V applications. This lock has a 5/8-inch pin with a center span of 3-5/8-inches....
    view full answer...

  • Complete Roof Kit Needed for Carrying 2 Paddleboards on 2014 Toyota Tacoma Using the Thule GoalPost
  • I have confirmed with my contacts at Thule, and the correct components that you would need to use in conjunction with the Thule Goalpost # TH997 for 2014 Toyota Tacoma are included below. This system consists of 1 each of the following parts: If your 2014 Tacoma has a Naked Roof: Single Square Load Bar part # 853-0182-14 Thule Traverse Roof-Rack Foot Half-Pack (QTY 2) part # TH4802 Thule Roof-Rack Fit Kit for Traverse Foot Packs part # THKIT1511 If your 2014 has raised rails then...
    view full answer...

  • Will Pop and Lock Tailgate Lock PAL8540 Fit a 2014 Toyota Tacoma with Backup Camera
  • Yes, the Pop and Lock tailgate lock # PAL8540 will fit all models of the 2014 Toyota Tacoma including models that have the backup camera. I have included a link to all of the tailgate locks we currently offer for you truck.
    view full answer...

  • Tonneau Cover for a 2014 Toyota Tacoma Double Cab Long Bed with OEM Bed Extender
  • I spoke with my contact at TruXedo and she stated that the Lo Pro QT tonneau cover, # TX556901, has side rails that stick out 3 inches on each side of the bed towards the inside of the bed. If the OEM bed extender on your 2014 Toyota Tacoma can fold up and that 3 inches on either side for the tonneau rails does not interfere then you can use this cover. All tonneau covers will have the side rails that stick out towards the inside of the bed, some less than others. The best option would...
    view full answer...

  • Air Lift Suspension System Recommendation for a 2014 Tacoma Double Cab Longbed 4x4 SR5
  • I checked with Air Lift and the correct air suspension system for your 2014 Toyota Tacoma 4x4 is the Air Lift Ride Control Air Helper Springs # AL59561. For a compressor you might also be interested in the Air Lift Load Controller II part # AL25592.
    view full answer...

  • Trailer Hitch for a 2014 Toyota Hilux/Vigo
  • I checked with Draw Tite and they have the Draw Tite Hitch part # 75730 listed as a fit for your 2014 Toyota Hilux so it should work well for you. I wasn't able to determine if the 1181496 would fit as a wiring kit though. Most likely it would, but Tow Ready hasn't had the chance to test it so I cannot confirm it as a fit.
    view full answer...

  • Ladder Rack and Tonneau Cover Recommendation for 2014 Toyota Tacoma Regular Cab
  • The TracRac Ladder Rack system you referenced, part # TA27000-01, is one of three confirmed fits for a ladder rack for your 2014 Toyota Tacoma. This fixed-mount ladder rack mounts to the underside of your Tacoma's bed rails with clamp-on hardware, no drilling required. A video is linked to illustrate. All ladder racks for your truck can be seen on the link provided. Typically tonneau covers and ladder racks will use the same points on the truck's bed rails for installation. The various...
    view full answer...

  • Will Rhino-Rack Roof Rack System # Y02-490B Work on Fiberglass Tonneau Cover on 2014 Toyota Tacoma
  • The Rhino-Rack Roof Rack System # Y02-490B is intended for permanent mounting on camper shells, resin roofs and hard tonneau covers. The system features bolt-on 63-inch tracks that mount to your hard tonneau cover (drilling is required). The four rack leg assemblies that hold the 59-inch aluminum crossbars can be positioned anywhere along these tracks to match your cargo needs and can be easily removed as a single unit. The bolt-on tracks will remain in place once installed. This system...
    view full answer...

  • Does the Pop and Lock Tailgate Lock, # PAL8521, Fit a 2014 Toyota Tacoma with Backup Camera
  • Yes, the Pop and Lock tailgate lock # PAL8521 will fit your 2014 Toyota Tacoma with factory back up camera. You can also make this a powered locking tailgate by adding conversion kit # PAL8525.
    view full answer...

  • Is a Roof Rack Needed to Install Rhino-Rack Cargo Basket on a 2014 Toyota Tacoma
  • For a cargo basket such as the Rhino-Rack basket # RMCB you will need to have a roof rack first in order to mount the basket. I have included a link to the roof rack main page for your 2014 Tacoma. It looks like it could have come with a factory roof rack, factory side rails only that run front to back, or a naked roof. If you can tell me what style roof you have and if it is an Access Cab, Double Cab, or Regular Cab, I will be happy to make some roof rack recommendations.
    view full answer...

  • Thule Standard Snow Chain Recommendation for a 2014 Toyota Tacoma P265 70 R16
  • The Thule Standard Snow Tire Chains # TH01571265 are confirmed to fit the tire size P265 70 R16 like what you have on your 2014 Toyota Tacoma. As long as the owners manual of your truck doesn't have any restrictions on snow chain usage this would be a great set of chains for your truck. I had a chance to install a set like this on a similar vehicle last week and was impressed with how easy they were to install considering how inexpensive they are relative to some of the high-end chains....
    view full answer...

  • Best Hitch Recommendation for a 2015 Chevy Colorado
  • The Hidden Hitch part # 87675 that you referenced has been confirmed as a fit for you 2015 Chevy Colorado so I would recommend it for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise...
    view full answer...

  • What are the Dimensions of the Rocky Mount 9-mm Clutch Truck Bed Bike Rack # RKY013
  • I pulled one of the RockyMount 9-mm Clutch Bike Fork # RKY013 from our warehouse and measured the span of the fork mount for you. The span is 4 inches and should work great for your application. Since you are going to be creating your own bike rack, I wanted to let you know that there is not any mounting hardware included with this bike rack. The outer most mounting holes require 6mm mounting hardware and the center requires 1/4 inch diameter hardware. The spacing from the center of...
    view full answer...

  • Best Tire Chains Recommendation for a 2014 Toyota Tacoma going Off Road
  • When it comes to snow chain usage on a vehicle the only thing we can safely recommend is that you follow the owners manual's recommendations. Otherwise the warranty of the vehicle will be voided and you could potentially damage the vehicle. For the size you have I would recommend the Thule Standard Snow Chains part # TH01571265. These can be used in offroad situations, will last longer than most chains, and will provide excellent traction. I recently had the chance to install a set of...
    view full answer...










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com