Custom Fit 2014 Hyundai Santa Fe Accessories

You will need a few different items to add a 7-way trailer connector to your 2014 Hyundai Santa Fe because Hyundai did not offer a factory connection for a 7-way trailer connector, only for a 4-way. If your Santa Fe was pre-wired for the factory…

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #CU94FR according to the manufacturer fits vehicle without the factory tow package. You can confirm you have the tow wiring harness this connects to…

For your adapter from the 4-way to a 7-way, I recommend the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole #37185. This will give you the option of adding the 12V power, the brake controller output, and the reverse lights. Even if you don't…

For installing a 7-way on your 2022 Hyundai Santa Fe you will need to start with a 4-way. For that you would want the #CU94FR. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will…

The etrailer.com Trailer Hitch #E98841 does fit your 2014 Hyundai Santa Fe Sport with a spare tire, though it can be tricky in order to get it back into position. You (or your friend) may need to angle the tire in and out, and use a bit of force to…

The towing capacity of the 2014 Hyundai Santa Fe varies depending on the specific engine and transmission in the car and on whether or not the trailer has brakes. Minimum capacity is 1653-lbs for trailers without brakes and the maximum for the…

Thank you for all of the great info! The Hollywood Racks Sport Rider SE #HR1400Z is a great bike rack itself, but from all of the info you gave me I don't think it's the best option for you as it weighs in at 81 lbs in the 4-bike…

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to…

Thank you for the photos they were very helpful. What you have on your vehicle is a 4-way flat, and on your trailer you have a 7-way round, which is less common than a 7-way blade-style, but there is still an option for you to connect the two. The…

The trailer tire and wheel part #AM32182 would work great for you as this is exactly what you have now.

In order to determine which trailer wiring harness you'll need, look under the vehicle just to the rear of the rear wheel on the driver's side of the vehicle. If you see the two connectors shown in the provided photo, use the Curt…

Both the Tekonsha T-One #118781 and Curt T-Connector #C56382 are custom trailer wiring harnesses confirmed to fit your 2019 Honda Odyssey, but I do recommend the Tekonsha #118781 for a couple reasons. First, the Tekonsha harness does feature a…