Custom Fit 2012 GMC Canyon Accessories

The Rhino-Rack DA118 is the Rhino-Rack roof rack with the Aero crossbars. And DS118B is the Rhino-Rack roof rack with discontinued square Euro-style crossbars. The Aero bars have since been replaced with Vortex bars. The Aero/Vortex bars are more…

The only parts list for your triple step is attached. It unfortunately does not give the breakdown to the extent you are seeking with Teflon plate and wave washer as those parts are not replacement options from the manufacturer. I've attached the…

Yes, there are wires under the dash of your 2012 GMC Canyon to wire in a brake controller. There will be a wire bundle under the dash, to the left of the steering column, held together with a white tag. That tag should list the functions of each of…

While you can use a weight distribution hitch rated for up to 7,500 lbs to tow an 8,500 lb travel trailer, you won't get any of the benefits so it is not something that would be ideal. In order to choose the best weight distribution system you…

The correct replacement for your 300-1406 motor is the Replacement Motor for Lippert Electric Coach Step part #LC301695. If you need other components I would need more info on the steps as this specific motor fits quite a few different steps. If…

The number you provided from the lens, SAEAP2 16 DOT states that the lens is compliant with DOT regulations, but in most cases it won't help us identify the lens. However, we've gotten enough inquiries about this lens that I can identify the…

A brake controller has four wires exiting the rear of the controller, they attach as follows: the red wire attaches to the brake stoplight switch located at the top of the brake pedal. The color of the correct wire on the brake switch is usually a…

The orange wire, see wiring diagram attached, is not used for the Roadmaster InvisiBrake Supplemental Braking System, RM-8700. Roadmaster added that wire when developing the braking system and found that it was not needed, so it is not used for…

Aside from the diagram in the linked instructions for the InvisiBrake #RM-8700 (see attached) the next best thing we have is an installation video of the Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit #RM-15247 being installed on a 2021 Jeep…

The cold side of a brake light switch is used as the trigger signal to activate a trailer brake controller like the Prodigy P2 #90885. The controller installation kit you purchased, part #ETBC7, includes a probe-style circuit tester that allows you…

When you are hardwiring a trailer brake controller like the Prodigy P2 #90885 the red wire connection that provides the triggering signal to the controller should be made to the wire on the COLD SIDE of the brake light switch circuit. This is the…

The Progressive Dynamics Lithium Converter #PD4560LICSV will replace the 4500 series converter you have installed in your RV currently and will allow you to use Lithium batteries.