2007 Ford Edge Accessories

Trailer Hitch Installation - 2007 Ford Edge

Today in our 2007 Ford Edge we're going to install the hidden hitch part number 87433. Before we can put our hitch in place we need to go ahead and lower the exhaust. Before I lower the exhaust I want to install a safety hanger to support the exhaust after we remove the hangers. Now we have three rubber hangers that we need to remove so that we can lower the exhaust. To remove the rubber hangers it's best to take some spraying lubricant and spray down each one of the hangers first. Now we can take our pry bar push the rubber isolators off the hanger.

WeatherTech Cargo Floor Liner Review - 2007 Ford Edge

Today on our 2007 Ford Edge, we're going to be doing a test fit of the WeatherTech Floor Liner for the rear cargo area, part number WT40325, black color. For this application, there's no rear mat to be removed. We're ready to go ahead and install the WeatherTech liner. WeatherTech liners are custom molded to precisely fit the vehicle and stay in place. The shape, channels, and moldings all work to help keep dirt and debris contained inside of the liner and away from the carpeting. This liner is a one-piece and will cover the entire rear cargo area.

WeatherTech Rear Floor Liner Review - 2007 Ford Edge

Today on our 2007 Ford Edge were going to be doing a test fit of the WeatherTech Floor Liners in the second row part number WT441102 black in color. First, well go ahead and remove the old or factory floor mats. Now we can go ahead install the WeatherTech liners. As you can see, this is a one piece liner that covers from the driver to the passenger side. The WeatherTech liners are custom molded to precisely fit the vehicle and stay in place. The shape, channels and moldings all work to help keep dirt and debris contained inside the liner and off of the carpeting.

WeatherTech Front Floor Liner Review - 2007 Ford Edge

Today on our 2007 Ford Edge were going to be doing a test fit of the WeatherTech Floor Liners in the front row part number WT441101 black in color. First, well go ahead and remove the factory old floor mats. Now we can install the WeatherTech Floor Liners. The WeatherTech liners are custom mold to precisely fit the vehicle and stay in place. The shape, channels and moldings all work to help keep dirt and debris contained inside the liner and away from the carpet. The liners can easily be removed in the vehicle and washed with soap and water.

Trailer Hitch Installation - 2007 Ford Edge

Today on this 2007 Ford Edge we are going to install part number 36447 from Draw-Tite. This also applies to part number 90164 from Hidden Hitch. This is what the hitch looks like on the vehicle and we will give you a couple of measurements that will help you out in ing some accessories such as a bicycle rack, a ball mount, or a cargo carrier. From the top of the receiver opening down to the ground on this particular vehicle is going to be 13-3/ 8 inches. From the center of the hitch pin hole to the outside edge of the bumper is going to be five inches. Next we will show you how it gets installed on the vehicle. 00:34

Trailer Wiring Harness Installation - 2007 Ford Edge

Today on this 2007 Ford Edge we are going to be installing wiring harness part number 118551. We are going to start our installation for our wiring harness inside the rear cargo area of the Ford Edge. The ports are located behind the tail lights but we are going to route the wires inside the vehicle. We are going to start by removing the cargo floor and if you lift the handle and pull away this floor cover comes off. Next take the large styrofoam sections around the spare tire and pull those away and these have friction pins holding them at the bottom so gently rock them back and forth and you can get that to release. 00:35