Custom Fit 2003 Chevrolet Silverado Accessories

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The TorkLift Custom Frame-Mounted Camper Tie Downs #TLC2204 and #TLC3206 that you referenced are designed to fit the 2003 Chevy Silverado 2500 with the 8 foot bed (without a board/step under the bed and without a trailer hitch). If you have the…

We do have the parts you need in order to run your Coleman stove from your trailer's quick disconnect, but you will also need a t-fitting to go with the hose. The reason you mentioned the stove has its own regulator; but your…

If your 2003 Chevrolet Silverado 2500 HD has the factory installed hitch and a 7-Way connector, then all of the wires for the brake controller have been run. The factory brake controller port is located in the black box underneath the dash on the…

To install a brake controller like the #5504 that you referenced you only need to connect it to 4 wires. If you find more wires on your vehicle than would be needed to install the controller you wouldn't need to do anything with them. I attached…

For your 2016 Ram 2500 I recommend going with Firestone Ride-Rite Air Helper Springs. We have these with 2 different weight capacities, 5,000 lbs #F2598 and 7,500 lbs #F2706. The 5,000 lb system should be more than enough since they will be helping…

I recommend the CE Smith Bolster And Swivel Mounting Brackets, part #CE10000G-4. These are 9 inches long and have a swivel feature that enables you to tilt the bunks to the correct angle to fit the bottom of your boat. We also carry the mounting…

The correct replacement Velcro for a Truxedo Lo Pro QT tonneau is the part #TX1115174. This strip is 1-5/16 inches wide and could be trimmed to length to fit your truck.

The #25580 bearing and the #L68149 bearing that you referenced have different inner diameters. The #25580 bearing has an inner diameter of 1.750 inches. This bearing's application is as an inner bearing for a #42 spindle or as an outer bearing…

Your 2003 Chevy Silverado 2500HD is absolutely compatible with the hitch you asked about, the Reese 5th Wheel Trailer Hitch #RP30047. It will work with your truck, you just need base rails in order to mount the hitch, and you can choose from a…

I have attached the installation instructions for the universal base rail installation kit, part #RP30035 you can check out. These is the rail kit that will work with your #RP30928 fifth wheel hitch. When measuring where to place the base rail, you…