Custom Fit 2002 Toyota Tundra Accessories

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Thanks for reaching out, those factory bumpers are a unique situation but I have a solution or two for you: **Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13184. *Westin Fey Surestep Rear Bumper - Black Powder Coated Steel…

Since the Hopkins 7 and 4-Way trailer connector #HM40975-11998 includes a hardwire harness it technically could be installed on any vehicle, including your 2002 Toyota Tundra with a 4-Way connector. But you will need to do some hardwiring and extra…

I have a solution for you, but HappiJac does not make a compatible tie down with your 2001 Toyota Tundra with a 6ft bed. Instead, you'll want to use the TorkLift Custom Frame Mounted Camper Tie Downs #TLT2301 (front) and #TLT3301 (rear),…

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2002 Toyota Tundra (Factory Hitch, Access Cab, Standard Tow Package, 6.5' Bed) is part #TLT2301 for the front and part #TLT3301 for the rear. Please note, the running…

There has been quite a bit of debating back and forth over whether or not a hitch like the #13184 can be installed on your 2006 Toyota Tundra. The manufacturers have also had mixed answers on the fit over time. One thing is for certain, installation…

Yes, the Longview #CTM4000 are confirmed for your 2002 Toyota Tundra if if has manual, electric, or heated electric mirrors. These are custom fit and confirmed for your truck, and are sold as a pair of mirrors. If you are looking for something more…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The safety chain holes are well hidden on Curt trailer hitch #C13180. There is a part of the hitch above the receiver that attaches to the vehicle bumper. The holes are in that plate. I have included a picture pointing them out.

I cannot find any reference to the part numbers you provided online. The Curt #C13180 Class III receiver hitch is a confirmed fit for the 2000-2006 Toyota Tundra. If you're needing the bolt hole spacing of the #C13180 that you'd looked at,…

You'll need a 20 amp circuit breaker for the brake controller power and a 40 amp circuit breaker for the battery charge line circuit from the trailer connector for a total of two. We actually offer a kit with these circuit breakers as well as the…

For a portable system, I suggest the Go Power Portable Solar Panel with Digital Solar Controller, #34282730. This is a 130 watt foldable solar panel that allows you to place it where you choose to for maximum sunlight. Under optimum conditions, this…