View Cart


2002 Jeep Accessories:

change make

Select 2002 Jeep Model



Select Model for Your 2002 Jeep




What our customers are saying:

Very broad selection and outstanding service.

Mike

Eagan, MN



Accessories



2002 Jeep Questions and Answers


  • Interior Lights Not Working in a New Trailer with 7 Pin Wiring Harness on a 2002 Jeep Liberty
  • It sounds like you may need to install a fuse in the fuse block under the hood on your 2002 Jeep Liberty to get the 12 volt power circuit at the OEM 7-Way connector to work. But the first thing I would do is check the bulb just to be sure it is not bad, then check to see if the interior trailer light is connected to the running light circuit. Turn on the running lights and if there is a switch in the trailer make sure it is on. If the light does not light, then you can check the power circuit...
    view full answer...

  • Trailer Wiring Harness Options for a 2002 Jeep Liberty
  • Oddly enough a tow package will not necessarily include a trailer hitch. Evey vehicle manufacturer has a different set of components that make up a towing package. The only definitive way to determine if your 2002 Jeep Liberty has a tow package is to have a dealer run the VIN number of the vehicle to tell you what options it has. f you find that your Liberty did not come with the tow package, then it will not be set up from the factory to accept the # 42475 harness. You will instead...
    view full answer...

  • Can Thule Vertex or Apex 5 Bike Rack be Used on Jeep Wrangler Being Flat Towed Behind a Motor Home
  • The shank on the Apex 5, # TH9026, is unique in that it has a built-in anti-rattle mechanism so the shank looks like it is for 1-1/4 and 2 inch hitches. But it is only for 2 inch trailer hitches. All 5-bike racks we carry are for 2 inch hitches only with the exception of the Yakima racks. The Apex does have the latest and greatest cradles with road-dampening technology to better protect the bikes. However Thule states not to use the rack on a vehicle that is being towed. There is potentially...
    view full answer...

  • What Parts are Need To Flat-Tow a 2002 Jeep Liberty
  • The all wheel drive (AWD) or 6 speed manual transmission models of the 2002 Jeep Liberty are the only models that can NOT be flat towed. All other models can but you will want to consult your owners manual for the proper procedure and recommendations for towing the vehicle. Two wheel drive models with the 42RFE, 45RFE, and 5-45RFE transmissions require transmission lube pump LP-1 from Remco. If you determine you can go ahead and flat-tow the Liberty, you will need a set of base plates...
    view full answer...

  • Will Honda Ruckus 49cc Fit Rage Powersports Hitch Cargo Carrier # MX600 on 2002 Jeep Grand Cherokee
  • The Rage Powersports Hitch Cargo Carrier, part # MX600, is designed to be used on a Class III 2-Inch hitch with at least a 500-lb tongue weight capacity. You will want to check the hitch on your 2002 Jeep Grand Cherokee to make sure it is a Class III 2-Inch hitch. The hitch will usually have a label on it that will list the maximum tongue weight capacity. If you need a hitch for your Grand Cherokee I would recommend the Hidden Hitch Class III 2-Inch Hitch, part # 87601. I am including...
    view full answer...

  • What Is Difference In Roadmaster XL Base Plate Kit, # 1420-1, And # 1424-1, For 2002 Jeep Wrangler
  • For your 2002 Jeep Wrangler the difference in the base plates is different application for what type of bumper you will have on your vehicle. The Roadmaster XL Base Plate Kit, # 1420-1, will fit a 1999 to 2002 Jeep Wrangler single tube bumper or a U-channel bumper. The Roadmaster XL Base Plate Kit, # 1424-1, will fit a 1997 to 2006 Jeep Wrangler double tube bumper or a U-channel bumper, and fits the Unlimited and the Rubicon. It will not work on Jeeps with front leaf springs. The...
    view full answer...

  • Do You Still Need to Pack Hub Bearings If Bearing Buddies are Used
  • You will want to pack the bearings with grease as you are reinstalling the trailer hubs. Check out the video I attached to see how this is done. The bearing buddies are a great way to make sure the assemblies are topped off with grease, but you still want to pack them initially. You may also be interested in the bearing packer part # L70025. Review video attached as well.
    view full answer...

  • Can Weight Distribution Chains Hang at an Angle or Do They Have to be Straight Up and Down
  • Ideally, you would want the chains to be straight up and down. A slight angle is permissible. What I recommend is to change the chain hanger type being used. There are 2 options. First we have a type that bolts to the side of the trailer frame, # RP58305. The other type is a skinny bracket that fits around the frame (up to 6-1/2 inches tall and 2-3/4 inches wide), # RP58306. With either set up you would need to use the trailer jack to jack up the trail and vehicle to achieve the required...
    view full answer...

  • Trailer Hitch and Bike Rack Recommendations for a 2002 Jeep Liberty
  • We actually do have a spare tire mount bike rack that will hold 3 bikes. Check out the SportRack 3 Bike Carrier Spare Tire Mount Bike Rack with Rotating Cradles, # SR2813. To make sure it will fit on your 2002 Jeep Liberty, you will also need to take some measurements to determine if the bracket that bolts behind the wheel will extend far enough out from the rear of the vehicle to clear the front face of the tire. The bracket mounts in between the spare tire and the vehicle, so you will...
    view full answer...

  • What Drill Bit Size to Use to Install Redline Replacement Trailer Axle U-Bolt with Nuts # 175130
  • Since the diameter size of the posts on this u-bolt is 9/16-inch you can ideally use a 9/16-inch or 5/8-inch bit (or even a 1/2-inch bit if you have the room to move the drill around enough to ream the hole to the required size). In either case you will want to ensure that the bits you are using are intended for drilling in the material on your trailer. Please refer to the photo provided which shows the dimensions of this item. Often it is easier to start a smaller-diameter pilot hole,...
    view full answer...

  • Can Friction Sway Control Be Installed on Either Side of Trailer
  • Actually the Pro Series Friction Sway Control part # 83660 can be installed on either side of a trailer. To install the Economy Pro Series Friction Sway Control Kit, item # 83660, on the right side, you will need to hook up the vehicle and trailer and pull forward so they are in a straight line with each other. You then mount the sway control ball on the weight distribution head. Next mark a point 24 inches from the center of the hitch ball and mount the ball plate on center with this...
    view full answer...

  • The Included Bolts Will Not Fit in the Weldnuts on Trailer Hitch 75128 on a 2002 Jeep Liberty
  • We have had this question before on a 2002 Jeep Liberty. Basically, there could be some dirt and grime gumming up the works and getting stuck in the weld nuts. This would make them hard to insert the bolts into. You can try cleaning them out real well using a spray lubricant like WD-40 or PB Blaster. Let it soak for a while and then dive in with a wire brush, like the Battery Post and Terminal Cleaner - Wire Brush, # DW00254, and some elbow grease to clean out the weldnuts. Once clean,...
    view full answer...

  • Does Connector Kit For DeeZee Truck Bed Auxiliary Tank Have Automatic Shutoff
  • The Connector Kit, part # DZ97960 is designed to work with an auxiliary tank like part # DZ91752X. This system has a gravity feed to transfer diesel fuel from your auxiliary tank to your OEM tank but there is no automatic shutoff. I called my contact at DeeZee and they told me that some trucks have a sensor and if the valve is left open all the time and allowed to empty fuel into the primary tank, you may get a code or check engine light. As you can see in the attached photo, there...
    view full answer...

  • Curt Hitch Recommendation for the 2002 Jeep Wrangler
  • Both the Curt hitch part # 13408 and the part # 13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the # 13408 uses a different attachment method like you noticed and has a square cross tube whereas the # 13430 uses a round tube. Both are equally strong, some just prefer the look of one over the other. I attached pics of both of these hitches installed to let you decide which you like better. I attached install...
    view full answer...

  • Is Roadmaster 910021-00 Quick Disconnect Compatible w/ Demco Tow Bar
  • The center to center distance between the holes for the vertical pins in the top of the quick disconnect is 28-1/2 inches. The linch pins that join the quick disconnect to the tow bar are 3/4 inches in diameter. This being said, Roadmaster offers a purpose-built adapter so you can use a Demco tow bar with Roadmaster base plates. If your base plates are the standard, non removable base plates, use part # RM-033. If you have the EZ or XL base plates, use the # RM-032 adapter. The #...
    view full answer...

  • Roadmaster BrakeMaster Seat Bracket Recommendation for a 2002 Jeep Cherokee
  • I checked with Roadmaster and the correct seat bracket that is recommended for your 2002 Jeep Grand Cherokee would be the part # RM-88150. Or if you actually have a Jeep Liberty the correct adapter you need would be the # RM-88184. In 2002 the Jeep Cherokees were known as the Jeep Liberty in North America.
    view full answer...

  • Curt Cargo Carrier # C18145 Recommendation for a 2002 Jeep Wrangler
  • I would recommend you use a Curt 20x48 Cargo Carrier # C18145 on your Jeep Wrangler as it is designed to be used on hitches with 1-1/4 inch openings. This hitch measures 6 inches from the center of the hitch pin to the nearest upright portion of the cargo carrier. You will want to measure from the center of the hitch pin hole on your hitch out 6 inches and see if the bumper or anything else would interfere, if not then this hitch would work well for you. You could use a hitch adapter...
    view full answer...

  • Blue Ox Base Plates for 2002 Jeep Wrangler
  • The Roadmaster Base Plate to Blue Ox Tow Bar Adapter, part # RM-033 is not included with the Blue Ox Acclaim Tow Bar. You would only need the adapter if your Jeep is already equipped with the Roadmaster Base Plates. If you do not yet have the base plates for your Jeep, we now carry Blue Ox base plates. For a C-channel bumper, use base plate part # BX1118, or # BX1120 for a double-tube bumper. When possible, it is best to use a tow bar and base plate from the same manufacturer. To...
    view full answer...

  • Base Plates and Other Equipment Needed to Flat Tow 2002 Jeep Wrangler Behind Motorhome
  • For the stock channel bumper, Blue Ox recommends using the # BX1118 base plates. The # BX88230 you referenced could work as well, but it would be up to you to do any engineering needed to determine if the bumper is sufficiently strong or do the fabrication to strengthen the bumper if necessary. If it were me, I'd go with the base plates Blue Ox recommends. To round out your flat towing set-up, you'll need some additional parts. The Blue Ox Alpha towbar you referenced, part # BX7365...
    view full answer...

  • Parts Needed to Tow a 2002 Jeep Wrangler With a RV
  • Yes, everything we sell is brand new from the manufacturer. We do have tow package options available for a RV to tow a 2002 Jeep Wrangler. We would just need to know the type of bumper on your Jeep Wrangler to get you the correct base plates for the a tow bar. Usually the bumper choices are single tube or double tube, or a flat U-channel bumper. We also have a few choices of tow bars available, one being the Roadmaster StowMaster Car-Mounted Tow Bar - 6,000 lbs, # RM-501, it attaches...
    view full answer...

  • Base Plate Options for a 2002 Jeep Wrangler for a Falcon 5250 Tow Bar
  • I believe you are looking for a base plate kit for your 2002 Jeep Wrangler. The base plate kit provides the attachment points for a tow bar such as the Falcon 5250 tow bar. There are a couple different base plate kits for the 2002 Wrangler depending on the type of bumper. If your Jeep Wrangler has a double tube bumper or a U-channel bumper, you can use the Roadmaster XL Base Plate Kit, # 1424-1. If your Wrangler has the single tube bumper, then you will want the Roadmaster XL Base Plate...
    view full answer...

  • Can Wagan Power Inverter # 02294 Power a Mini-Fridge in a Camper
  • The Wagan Power Inverter # 02294 that you referenced should be able to run your mini-fridge in your camper without any problems. To confirm this check your appliance for how many watts are required. If the wattage is not listed you can simply determine this number by multiplying the number of amps by the number of volts (amps x volts = watts). This inverter has a continuous power rating of 1000 Watts. I have attached a brief installation video as well as the installation instructions.
    view full answer...

  • Will Spare Tire Bike Rack # SR2813 Fit a 2002 Jeep Liberty Sport
  • Though bike rack # A30813STL does not have vehicle specific fits, you will still want to do a little measuring to make sure it will work with the current spare tire and wheel on your 2002 Jeep Liberty. You will need to take the measurement from the back of your lug nut holes to the furthest out point on the tire. If this measurement is 4-1/4 inches or less, then you would be able to use the # SR2813 bike rack. I have included a demonstration video so you can see exactly how the...
    view full answer...

  • Will Draw-Tite Trailer Hitch Mount Cargo Carrier 6502 Clear the Spare Tire on a 2002 Jeep Wrangler
  • First, to determine what size hitch you have, measure the inside width of the receiver. If it is 1-1/4 inches, you have a Class I or II hitch. If it is 2 inches, you have a Class III or IV. I have included a link to an FAQ on hitch classes for you. To determine how much clearance an accessory will need to clear the spare tire on the 2002 Jeep Wrangler, measure from the center of the hitch pin hole back to the distance required to clear the spare tire. We have done this measurement on...
    view full answer...

  • Trailer Wiring Recommendation for a 2002 Jeep Grand Cherokee
  • I wasn't able to find an invoice in our system that showed what tow bar wiring you have installed on your 2002 Jeep Grand Cherokee but we have what you would need to install trailer wiring on your vehicle. The part # 118369 is confirmed as a fit for your vehicle and would work well for you. Due to how this installs it would not interfere with your tow bar wiring. I attached an install video for you to check out as well.
    view full answer...

  • Recommended Components for Flat Towing 2002 Jeep Liberty Behind a Motor Home
  • The Roadmaster XL Base Plate Kit # 1422-1 you referenced is a good fit for your 2002 Jeep Liberty as long as your vehicle does not have a brush guard. This kit features a hidden bracket design which allows the draw bars to be easily removed via 2 pins, giving the base plates a more subtle appearance. It is also compatible with all Roadmaster tow bars. If your Jeep does have a brushguard, you can go with the Roadmaster EZ Base Plate Kit # 521426-1. Prior to flat towing your vehicle,...
    view full answer...

  • Parts Needed to Flat Tow 2002 Jeep Wrangler with Lift Kit and Double Tube Style Bumper
  • The best option for flat towing your Wrangler is to install a set of base plates like the Roadmaster XL Base Plate Kit # 1424-1. These base plates were designed to fit a 2002 Jeep Wrangler with double-tube style bumpers and and u-channel bumpers. They bolt directly to the frame and have the capacity to pull the Jeep. For a tow bar, the most popular option for the XL base plates is the Roadmaster Falcon 2 # RM-520. I have included a link to the installation details and a link to a video...
    view full answer...

  • Front Mount Trailer Hitch that Mounts Under the Bumper for a 2002 Jeep Wrangler
  • We do offer a front mount receiver that is designed to fit below the bumper on a 2002 Jeep Wrangler. Take a look at CURT Front Mount Receiver, # C31028. I have included a link to the installation instructions. As you will see in the instructions, this hitch fits below the bumper and attaches to the vehicle frame. Even though there is some drilling required for installation, you will not need to remove anything mounted on top of the bumper.
    view full answer...

  • Bike Rack Recommendation for a 2002 Jeep Liberty With Easy Installation and Use
  • The Yakima Spare Time 2 Bike Rack, # Y02598, is going to be the easiest bike rack to use on your 2002 Jeep Liberty. At only 20 lbs, it is one of the lightest bike racks that we carry. The initial installation does require some labor simply because the spare tire must be removed, but other than that, the installation is quite simple. Once the base plate is installed this bike rack will be much easier to use and remove than any hitch mounted bike rack on the market. If any of the bikes...
    view full answer...

  • Replacement Hitch Installation Hardware for Curt Class III Hitch # 13051
  • Yes you can order replacement hitch installation hardware. Hitch hardware is designed for a single use only and should never be re-used. Just enter part # RHK into our search box and press GO. Click on the part and then enter the hitch part # 13051 into the field provided and select Curt from the drop-down menu bar. We will then ship all of the correct fasteners for you. I have linked the written hitch installation instructions for you for Curt # 13051. Be sure to follow the install...
    view full answer...







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com