2002 Ford Escape Accessories

Thule Domestique Roof Bike Rack Review - 2002 Ford Escape

Swagman Fork Down Roof Bike Rack Review - 2002 Ford Escape

Trailer Hitch Installation - 2002 Ford Escape - Hidden Hitch

Today on our 2002 Ford Escape, we'll be installing Hidden Hitch, part number 70636. This is what our hitch will look like once it's installed. Next, we'll go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is five and a half inches. From the top of the inside of the receiver tube opening to the ground is 14 inches. This will assist you with selecting accessories such as a ball mount, bike rack, or cargo carrier.

Husky Cargo Floor Liner Review - 2002 Ford Escape

Today on our 2002 Ford Escape, well be installing the Husky Liner Classic Custom Cargo Liner, part number HL23152 grey in color. First step of our install, well first go ahead and open up the rear cargo door and sit it into place. As you can see Husky Cargo Liners are custom molded precisely to fit the vehicle and stay in place. The shape, channels and moldings all work to keep dirt and debris contained in the liner and off of the carpeting. With its raised outer edge and custom molding to the floorboard and interior trim panels, it provides complete coverage from side-to-side and from threshold to second row seating. One more great feature about the Husky Cargo Liner is its easy to install and can also be easily removed and cleaned and washed with soap and water.

Trailer Hitch Installation - 2002 Ford Escape - Draw-Tite

Today on our 2002 Ford Escape, well be installing a Draw Tite Hitch, part number 75118. This is what our hitch will look like once it is installed. Next well go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 5 inches. From the top of the inside of the receiver tube opening to the ground is 14 inches. This will assist you with selecting accessories such as a ball mount, bike rack or cargo carrier. Now well go ahead with the installation.

Rain-X Latitude Wiper Blades Installation - 2002 Ford Escape

Today on our 2002 Ford Escape, well be installing the Rain-X Latitude Windshield Wiper Blades, part number RX5079276 19 inches in length. The Rain-X Latitude Windshield Wiper Blade is a perfect replacement for the all-weather windshield wiper blade that provides superior visibility in rain, snow and sleet. The contoured bean style frame appeals uniform pressure along the entire length of the blade creating streak free wiping. With a heavy-duty graphite coated rubber edge, it delivers a smooth noisily wiping action even in freezing conditions. The aerodynamic design reduces wind drag, noise and lift at high speeds. The sturdy stainless steel blade encased in rubber is rust proof and long lasting.

Rain-X Weatherbeater Wiper Blades Installation - 2002 Ford Escape

Today on our 2002 Ford Escape well be installing the Rain-X Weather Beater Windshield Wiper blades, part number rx30219, the 19 inch wiper blade. First well go ahead and remove the older manufacturers wiper blades by raising up on the wiper arm rotating the wiper blade so that we can see the locking tab. Then well press on the locking tab and pull down on the wiper blade unlocking it from the j-hook of the wiper arm. Well go ahead and take the new one, line it up with the j-hook of the wiper arm, firmly press it into place locking it in position. Then well give it a couple quick tugs to make sure it locked in and then well return the wiper arm to the windshield. Now with the drivers side done well go ahead and repeat the same process on the passenger side.

Trailer Wiring Harness Installation - 2002 Ford Escape

Today on our 2002 Ford Escape well be installing the Tow Ready T1 Connector, part number 118343. To begin our install, well first go ahead and open up the rear cargo door. This will allow us to see the fasteners to remove the rear taillight housing on both sides. Starting here on the drivers side well go ahead and remove the two fasteners and then pop the taillight out of position. Note: To pop the taillight out of position were going to be using a small plastic pry bar, but you can also use a flat bladed screwdriver just be careful not to chip the paint. Now, once youve popped the taillight out, be careful not to break the alignment tabs underneath.

Yakima Control Tower Roof Rack System Review

Today on this 2002 Ford Escape we are going to be installing a Yakima Control Tower Roof Rack using the control towers part number Y00214, the Yakima landing pads part number Y00221, and the Yakima 48 inch round crossbars part number Y00408. The first thing we need to do in preparation to install the roof rack is to remove the factory crossbars on the Escape. To do this we are going to loosen the knobs and slide the tracks rearward. With the factory crossbars removed the first step is to install the nut plates inside the track in the approximate position where we are going to put the landing pads. We will repeat the same process for the track on the passenger side. 00:45