Custom Fit 2000 Dodge Dakota Accessories

For an idler hub that has the bolt pattern you need of 5 on 4-1/2 inches and fits a spindle that measures 1 inch for both bearing surfaces we have the part #AKIHUB-545-2-1K. If you needed a brake drum hub you instead would want part #AKHD-545-2-1K.

In the picture I have attached you will see the dimensions of the Titan Aero 7500 Brake Actuator #T63FR noted has an overall length of 20 inches. You mentioned that your trailer tongue is 3-1/4 inches wide - the standard width of a trailer tongue…

According to my research, the Titan Aero 7500 and the 6000 Brake Actuating Couplers both use the same bolt pattern. To confirm this, you can compare the dimensions of the diagram I produced for you with the bolt holes on your trailer tongue.…

My research indicates that the Coleman part 4716A1071 refers to a Dexter 7 x 2-inch hub/drum with a 5-lug pattern. We have several options in this size hub/drum that are displayed on the linked page; all have the 5-on-4-1/2 bolt pattern and all are…

The Titan Brake Actuator #T63FR doesn't have a specific manual. There are just parts of a catalog that refer to it. I've attached those photos to assist. This product is the drum brake actuator for the Aero 7500 and has a manual…

The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs #ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber…

Anytime that a spindle is starting to take damage you will want to replace it as that will affect the performance of your bearings and seal. In this case since that chipping is right where the seal sits (as you mentioned) that will eat at the…

When looking for a replacement brake line kit, you will want to measure from the port on the back of the actuator to the T-Fitting where the lines split off and go to the separate brakes, which is typically right at the axle. There will be a short…

I looked up your 2000 Dodge Dakota Sport and it looks to have a towing capacity of between 6,100 to 6,700 lbs so as long as your trailer would weigh less than that when loaded you'd be totally fine. If you are in need of a trailer hitch I'd…

I have a coworker who drives a 2001 Dakota which is the same generation as your 2000. So I checked his owners manual, see pictures. It appears that the bigger V8 for this truck, the 5.9, does not have enough capacity to tow an 8,000 pound trailer.…

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers will…

In the trailer world GTW stands for Gross Trailer Weight, and TW means tongue weight. Gross trailer weight is the entire weight of the trailer and tongue weight is the amount of vertical load that is on the coupler of the trailer. Basically how the…