CartView Cart

Free Shipping on Orders Over $99

Only 3 Hours 28 Minutes Remaining

1989 Dodge Ram Pickup Accessories

change vehicle

1989 Dodge Ram Pickup Questions and Answers

  • Compatibility of Ball Mount with Reese Premium Series Class IV Trailer Hitch # 36025
  • Reese hitch # 36025 does have a cosmetic trim ring around the receiver tube. It sounds like your ball mount fit with this trim ring is the issue. Please note that I was not able to find the other part number you referenced, 54933, on the Reese website but my technical contact there confirmed it is an adjustable ball mount that was obsoleted about 18 years ago. My contact at Reese confirmed that any current-production 2-inch Class IV ball mount should work fine with this hitch. The...
    view full answer...

  • Availability of USA-Made 2-5/16-Inch Hitch Ball Rated for 30,000-lbs
  • We do offer a USA-made hitch ball with specs similar to the one you referenced. B and W offers their 2-5/16-inch hitch ball # BWHB94004. This has a gross weight capacity of 30,000-lbs, a 1-1/4-inch diameter shank that is 2-1/2-inches long, a fine thread pitch (12 TPI) and includes the lock washer and nut. All heat-treated parts have a raw finish.
    view full answer...

  • Will Using Trailer Hitch Mount Motorcycle Carrier Reduce Tongue Weight Capacity of 2012 Dodge Ram
  • When a trailer hitch is designed and manufactured and then given a tongue weight capacity rating, it takes into account the various movements, vertical/horizontal, that will be inflicted on the hitch. So a hitch with a 500 pound tongue weight capacity was designed with tolerances to accept the period changes in load due to bouncing, twisting, and other stresses to the hitch. A carrier like # SMC600 with a bike loaded on it is going to be all tongue weight since you are not also towing...
    view full answer...

  • Will a Curt Q20 5th Wheel Trailer Hitch Fit RBW X18 Rails
  • The Curt Q20 5th wheel trailer hitch # C16130, works with industry-standard rails from Curt, Draw-Tite, Hidden Hitch, Pro Series, Reese, and Valley. These rails have mounting slots that are 22 inches apart on center front to back. Side to side there are 3 sets of mounting slots that are 10, 20-1/2, and 29 inches apart on center. i have included a picture showing the measurements. You will need to measure your RBW rails to determine if the Curt hitch will fit.
    view full answer...

  • Will Curt Trailer Hitch, # 14001 Fit on a 1989 Dodge D250 Pickup With a Cummins Turbo Diesel
  • The Curt Trailer Hitch, # 14001, will fit your 1989 Dodge D250 pickup as long as it does not have a roll pan bumper. I have included a link to a video installation on a similar truck below. I also added a link to the installation instructions. I also recommend the Forged Ball Mount, # 40331, and ball # A-90 (2 inch diameter), or # 19286 (2-5/16 inch diameter). The wiring for your truck is the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118317. Installation is easy....
    view full answer...

Stay Connected

Subscribe to email newsletter


privacy - we don't send unsolicited email

Free Shipping on Orders Over $99

Only 3 Hours 28 Minutes Remaining reviews

All images, layout and content copyright