customer service | view cart  View Cart

2000 Ford Expedition Accessories

change vehicle

Popular Ford Expedition Accessories





2000 Ford Expedition Questions and Answers


  • Fit of Putco Liquid Spiderweb Grille # P303106 on 1999 Ford Expedition
  • According to our friends at Putco, the Liquid Spiderweb Grille Insert you referenced, part # P303106 is indeed a fit for the 1999-2002 Ford Expedition, and will fit your vehicle.
    view full answer...

  • Dimensions of the Curt Bumper Mount Trailer Hitch # E-3S
  • I pulled the Curt Bumper Mount Hitch, # E-3S, from the warehouse and made a video showing you the measurements that you were asking for. The wider holes, closest to the receiver opening, are 1-1/4 inches wide and accept a 3/4 inch diameter bolt. The bolt holes measure 10-3/4 inches at their widest points and 7-1/4 inches at their closest point. With the bolts set at the widest point, they measure 9 inches apart on center and 8 inches apart at the closest point.
    view full answer...

  • Parts Needed to Install 7-Way RV Trailer Wiring and Connector on a 2000 Ford Expedition XLT
  • The Ford Replacement OEM Tow Package Wiring Harness, # 118243, is only designed to work as a replacement for Ford vehicles that came with the OEM wiring originally installed at the manufacturing plant, and is not designed to work with your Expedition. To make sure you have all the parts to install a working 7-Way wiring harness on your Expedition you will need a couple of items. First, if your 2000 Expedition does not have a working 4-Way flat trailer wiring harness, you will need to insta
    view full answer...

  • What are the Dimensions of the Pro Series Powered A-Frame Jack # PS500198
  • The Pro Series jack # PS500198, is made over seas. The outer tube diameter is 2-1/4 inches. The inner tube diameter is 2 inches. The distance from the mounting bracket to the bottom of the inner leg when fully retracted 8-1/2 inches. I spoke with my contact at Pro Series. He stated that the Pro Series A-Frame Powered Jack, # PS500198, is 18 inches from the mounting bracket to the top of the jack. With the handle inserted it is 4-7/8 inches taller.
    view full answer...

  • Which Edge Performace Chips Will Work on a 2000 Ford Expedition 4.6 Liter V8
  • There are actually 2 Performance Chips available for your 2000 Ford Expedition 4.6 liter V8. First is the Edge Evolution CS, # EP85150. It offers 40 foot pounds of additional torque, 50 more horsepower, and has 5 power levels. The Edge Evolution CTS, # EP85250, will also fit. It offers the same specs as the above CS model but it has a touch screen interface. I have included instructions for both recommended Chips below along with a video demo. The Edge Evolution Programmer, # EP15050, is d
    view full answer...

  • Location of Brake Controller Installation Port on 2000 Ford Expedition XLT
  • The port should be located under the dash, near the steering column. It is in pretty close proximity to the diagnostic port. It sounds as if you might need a Brake Controller Wiring Adapter. If so, we offer them. The part # is 20260.
    view full answer...

  • Wiring adapter for brake controller on 2000 Ford Expedition
  • You should only need one of the wires on the 6 pole connector to hookup your electric brakes. The blue wire from the brake controller should be ran all the way to the 6 pole trailer connector on the vehicle and the brake circuit on the 6 pole trailer connector and will power the trailer brakes. The black wire on the 6 pole vehicle connector can be ran to the vehicle battery 12 volt power so that the trailer battery can be charged while towing, if needed. On our wiring page (see link below) the
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com