Trailer Wiring Harness Installation - 1999 Honda CRV
Today we are going to install part number 118336 from Tow Ready, and we are going to install this on a 1999 Honda CRV. To begin our install we actually have to get behind the speaker area. That is where the plug is actually attached at. We will just go ahead and pry this off, and then there are three screws that we have to undo to get behind the speaker. Be careful that you do not poke a hole in the speaker. And there is the plug right there, taped to the speaker wires. We will leave that sit there for now. And actually, if you want, you can actually take the speaker off - it might be a little easier to work with. What we do next is go ahead and pull back our carpeting, pull out this hatch, and then we are going to take this little plastic screw out to get back underneath here. All right, next we are going to route our cable from inside here down here. And it is all sheet metal behind here. So really we are going to take this panel loose and pull it away from it and run the cable between the metal and the plastic. And that means taking off this, this threshold, and pulling this back out so we can get some working room. First, we will take off this tie-down bracket - give us some working room there. And you can see we have got to take this thing off to get some more working room. So that means we have got to clean off this area here to get underneath here to take out our threshold.
