customer service | view cart  View Cart

1998 Jeep Wrangler Accessories

change vehicle

Popular Jeep Wrangler Accessories





1998 Jeep Wrangler Questions and Answers


  • Base Plate Kit Recommendation for a 1998 Jeep Wrangler Sport Automatic and a Remco Tow Bar
  • Based on my research, your Remco tow bar should be compatible with all Blue Ox base plates, so for your 1998 Jeep Wrangler Sport, I would recommend the Blue Ox Base Plate Kit, # BX1118. I would also recommend verifying that your tow bar is compatible with Blue Ox base plates. This base plate kit is compatible with the U-channel or double tube bumper. Before you install a base plate kit, I recommend checking your vehicle owners manual for flat tow compatibility. There may be certain restricti
    view full answer...

  • Replacement Side View Mirrors and Doors for a 1998 Jeep Wrangler SE
  • The Bestop 2-Piece Soft Doors, # B5178915, will fit on your 1998 Jeep Wrangler SE, but the replacement mirrors, # B5126201, that you referenced are not designed to fit on the 2-piece soft doors. Instead, you will want the Bestop Replacement Mirrors, # B5126101, and mounting bracket, # B5125801. The doors, mirrors and mounting brackets will include all necessary installation hardware and I have attached a link to the installation instructions for the door for you to check out.
    view full answer...

  • Do the Bully Nerf Bars # NB-506B Include all Installation Hardware and Brackets
  • I spoke with my contact at Pilot and verified that the Bully Nerf Bars, # NB-506B, does include all installation hardware and mounting brackets. These step bars are designed to fit all models of the 1998 Jeep Wrangler 2-door and they will fit your Sport edition. I have attached a link to all of the step bars that we carry for your Jeep for you to check out.
    view full answer...

  • Which Bestop Replace-A-Top for 1998 Jeep Wrangler
  • Both the # B5112415 and the # 5112115 would fit your 1998 TJ. The B5112415 provides tinted side and rear windows, but the half door skins are not tinted. The B5112115 come with un-tinted windows. Other than the window tint, the tops are identical.
    view full answer...

  • Will the Bestop Upper Door Sliders Work with a Hard Top on a 1998 Jeep Wrangler.
  • The Bestop Upper Door Sliders, # B5178715, will work with the hard top on your 1998 Jeep Wrangler. The only issue that you may run into when using these upper door sliders with a hard top is that the seals do not completely line up when used with a hard top. They were specifically designed to work with soft tops, but they will shut without issue and perform all other functions normally.
    view full answer...

  • Second Row Seat Covers Recommendation for a 1998 Jeep Wrangler
  • Yes, you would want a set of Covercraft Seat Covers # SS6273PCSA. This is the matching rear seat covers for your 1998 Jeep Wrangler that would go well with the Covercraft SeatSaver Custom Seat Covers # SS1248PCSA that you referenced.
    view full answer...

  • Will Thule Replacement Mounting Plate # 753-3532 Fit an Older Thule Spare Tire Bike Rack
  • I spoke with my contact at Thule and she said the part # 5155168 is a part number for a decal, not for a bike rack. She did say that if your Thule spare tire bike rack has a silver frame, like the Thule Spare Me 2 Bike Carrier, part # TH963PRO, then the Thule Replacement Mounting Plate, part # 753-3532 will work. If the spare tire bike rack has a black frame, the # 753-3532 will not work. They do not have replacement parts for the spare tire bike rack that is black, because it is an older de
    view full answer...

  • Trailer Connector for 1998 Jeep Wrangler for Flexibility in Towing Multiple Trailers
  • The Hopkins Multi Tow Harness you referenced, part # 42615 will allow you to tow any trailer equipped with a 4-pole trailer connector. An adapter like part # 37185 would plug into the 4-pole, retain its function, and allow you to tow a trailer equipped with a 7-way connector. The adapter would plug into the existing 4-pole (once you install it). The adapter has 4 wires exiting it that might or might not need to be connected, depending on the trailers you are wanting to tow. The white ground wire
    view full answer...

  • What Parts are Needed to Flat Tow a 1998 Jeep Wrangler
  • There are actually 5 components you will need to flat tow a vehicle: base plates, tow bar, safety cables, lighting, supplemental braking. The first thing to do would be to consult the vehicle owners manual to determine if it can be flat towed. For base plates, you can use the Roadmaster XL base plates, # 1424-1. These are XL style base plates with draw bars that can be removed. The Tracker tow bar, # RM-020, is compatible but to allow the XL draw bar arms to be removed when using this tow bar
    view full answer...

  • Parts Needed to Flat Tow a 1998 Jeep Wrangler
  • You would normally see leaf spring suspension at the rear of a vehicle. If your 1998 Jeep Wrangler has front leaf springs then the base plates # 1424-1 will not fit. In terms of right hand drive, it means if the steering wheel is on the right hand side of the car, like you would see in the U.S. in some mail delivery vehicles or like they are in the UK, then these base plates will not fit. In addition to base plates, you will also need a tow bar, safety chains, lighting, and supplemental braki
    view full answer...

  • Can Base Plates for Flat Towing be Installed on a 1998 Jeep Wrangler with Aftermarket Bumper
  • In order to flat tow any vehicle, including a 1998 Jeep Wrangler, you will need to have base plates installed because they create a safe and secure connection for use with a tow bar to flat tow a vehicle. The base plates for the Jeep (see link) are designed for installation on stock vehicles and I cannot guarantee that they will fit with an aftermarket bumper on like # B4291701. To choose the correct base plates you will need to go by the stock bumper. There are base plates for Jeeps with the
    view full answer...

  • Replacement Soft Top Recommendations for a 1998 Jeep Wrangler Sport
  • We have several styles of soft top replacements for your 1998 Jeep Wrangle Sport. The Bestop Trektop, # B5680115, would be my first choice because it does not require a bow system for installation and it has tinted windows to keep the sun from heating and decaying the Jeep interior so rapidly. Doors sold separately. Next, we have the Bestop Supertop, # B5471315, which includes 2-Piece soft doors, tinted windows, support bars, hardware and Belt-Rail system. Another top we have is the Bestop
    view full answer...

  • Does the Hidden Hitch # 87431 Really Have a Mounting Bracket for the Trailer Wiring Harness
  • Yes, the Hidden Hitch Class III Trailer Hitch, # 87431, for your 1998 Jeep Wrangler does include a mounting bracket that can be used to install a 4-Way trailer wiring bracket, # 18144, or a 7-Way trailer wiring connector bracket, # 18138. The photos on our site are actual photos of the hitch, and we have a video installation that shows the hitch, with bracket, going on a 2000 Jeep Wrangler that should be helpful.
    view full answer...

  • Roof Rack Recommendation for a 1998 Jeep Wrangler
  • The recommended roof rack for your 1998 Jeep Wrangler is the Thule Roof Rack, part # TH300, THLB58. This rack is designed to work on hard top 1998 Jeep Wranglers and would work very well for you. I spoke with my contact at Thule about whether or not you could use the Thule Gutter Feet, 8 inch High, part # TH387, and she told me that it has never been tested and she could not safely recommend it for your Jeep.
    view full answer...

  • Will the Front Mount Trailer Hitch Receiver Winch Mounting Plate # 6495 Fit a 1998 Jeep Wrangler
  • Yes, the Front Mount Trailer Hitch Receiver Winch Mounting Plate, item # 6495, will fit in a Curt 2 inch receiver like the Curt Trailer Hitch for the 1998 Wrangler by Jeep, item # 13408. Other parts you may be interested in are the Curt Trailer Hitch Electric Winch Mount Plate, item # C31010, or the Curt Trailer Hitch Electric Winch Mount Plate and Handle Assembly, item # C31009.
    view full answer...

  • Availability of Trailer Wiring Harness for a 1997 Jeep Wrangler TJ
  • The 1997 Jeep Wrangler TJ retained the same wiring that the Tow Ready Custom Fit Vehicle Wiring, item # 118356, was designed for. In 1998 the wiring for the TJ changed a bit and the Wiring harness was then changed to work and given part # 118409. To install a 4-Way wiring harness on your 1997 TJ you will need to use item # 118356. I checked fit with 3 different manufacturers and all of their wiring harnesses change between model year 1997 and 1998. I am including a link to the installation
    view full answer...

  • Will Bestop Tinted Window Kit, Black Denim # B5812115 Fit On 1998 Jeep Wrangler Factory Soft Top
  • I called Bestop on the Bestop Tinted Window Kit, Black Denim, # B5812115 for your 1998 Jeep Wrangler. They said it will work on the factory soft top and on the Bestop brand soft tops only. So if you have either one it should work fine. I am sending a link with the instructions for this kit.
    view full answer...

  • How to Install Car Side Quick Disconnects RM-222 on a 1998 Jeep Wrangler
  • The car side quick disconnects are bolted directly to the base plates installed on the frame of your vehicle, and are then attached to the quick disconnects on the tow bar side. For the 1998 Jeep Wrangler, You would use base plate kit # 1424-1 if your 1998 Jeep Wrangler is a Rubicon, Unlimited, or double tube bumper model. If your vehicle has a U-channel bumper, you would use base plate kit # 1417-1. To give you a better understanding of how the car side quick disconnects and a towbar w
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com