customer service | view cart  View Cart

1996 Ford Bronco Accessories

change vehicle

Popular Ford Bronco Accessories





1996 Ford Bronco Questions and Answers


  • Parts Needed to Flat Tow a Vehicle with a Roadmaster Base Plate and Blue Ox Aventa Tow Bar
  • Yes, but you will need an adapter. You will need a RoadMaster Base Plate to Blue Ox and Tow Bar Adapter # RM-033 to be able to go from a Roadmaster Classic Base Plate kit # 442-2 to a Blue Ox Aventa LX Tow Bar # BX7445. The Aventa comes with safety cables but you may be interested in the following products to complete your towing setup: Roadmaster Tow Bar Quick Disconnect Kit # RM-201, this will provide you with an easy way to connect and disconnect the tow bars from the base plates. Fo
    view full answer...

  • Will the SportRack Explorer Cargo Box Fit on Round Crossbars on a 1996 Ford Bronco Full Size
  • As long as the round cross bars on your 1996 Ford Bronco have a diameter less than 4 inches and have a crossbar spread between 24 and 34 inches, then the SportRack Explorer Cargo Box, # A90095, will fit. You can measure your crossbar spread by measuring from the center of one crossbar to the center of the other crossbar. You may also be interested in the SportRack Aero XL Cargo Box, # A90275. the SportRack Explorer Cargo Box will come completely disassembled and the SportRack Aero XL, whi
    view full answer...

  • Roof Rack for Carrying Kayak on 1996 Ford Bronco
  • The Gutter Feet, part # TH300 along with the 65 inch load bars, part # THLB65 is what Thule recommends for your 1996 Bronco. Installing the load bars on the rain gutters (which are only located on the front portion of the roof above the doors) will give you a bar spread (distance between the front and rear load bar) of only 20 inches, which is shorter than recommended for carrying a long object such as a kayak. If you were to use part # TH542, you would be able to mount one load bar over the
    view full answer...

  • What is the Highest Rated Trailer Hitch Available for a 1996 Ford Bronco
  • The highest rated available trailer hitches I can find for a 1996 Ford Bronco are Class IV hitches. We carry the CURT Trailer Hitch, # 14001. This hitch does not fit cab and chassis models or models with a roll pan bumper. It is a Class IV hitch rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight, 12,000 pounds when used with weight distribution. I have included a link to the installation instructions. If you plan on doing some towing, I recommend the etrailer Ball Mou
    view full answer...

  • Do You Carry Replacement Parts for the Reese Mini 350 Weight Distribution System
  • The replacement right hand spring bar for the Mini 350 WD system is part # 66051. The left hand bar is part # 66052. The replacement pads are part # 58105 and the replacement anchor is part # 66032.
    view full answer...

  • Brake Controller Installation and Recommendation for a 1996 Ford Bronco
  • At this time we have not had he chance to video a brake controller installation on a 1996 Ford Bronco. I do have some information that will be helpful though. If your Bronco has a factory 7-Way connector at the rear of the vehicle or if you have a factory tow package there will be a plug along the left frame rail behind the rear bumper. If this plug is present then you can look for a brake controller connector under the dash above the transmission hump. This connector will match up to the Uni
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com