Today on our 2013 Ford F150 Super Crew Cab, we'll be doing a test fit on the Ksource universal clip-on towing mirror, part number KS3891. \ The mirror itself can be adjusted to most angles. We've got our side to side, up and down, and even diagonal, and by simply removing the Phillips-head screw here at the back, we can adjust our mirror to the horizontal position. You can see how the four tabs are not gonna interfere with the operation of our factory mirror. We've still got plenty of movement, and we can even still fold it in. Here on the back, you can see that it uses 2 straps to secure it to our factory mirror. It has large rubber pads, so you're gonna get a tighter fit, and it's not gonna harm the finish of our mirror.
Today, in our 2007 Toyota Tundra, we'll be installing the K-Source Snap & Zap Custom Towing Mirrors. This is a kit with a driver and passenger side, part number KS81300. Now you can see me just fine in our factory mirror. As you can see, I'm standing right next to our pontoon boat that our Tundra's hooked up to. Now let's say we needed to change lanes while we're towing our boat behind our Tundra. I'm going to walk over here to the side. Now you can't see me any more in the factory mirror, but you can see me in the new tow mirror.
Today on our 2016 Hyundai Tucson we'll be doing a test fit on the CIPA universal bar clip on towing mirror, part number CM11980. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even backup while towing a trailer. As you can see I'm visible in the towing mirror but not the factory mirror. If I take a few steps into towards my trailer, as you can see there's no blind spot by the way we have it setup. This is the view you'd get with just your factory mirror. The mirror itself can be rotated 360 degrees.
Today on our 2013 Honda Sante Fe, we're going to show you how to install the K-Source Universal Clip-On Towing Mirror. Part number is KS3891. Here's a good example of the field of view difference we can expect from the K-Source clip-on mirror. Currently, I'm standing right at the back corner of a 25 foot enclosed trailer. As I step out from there, you'll see about this area is where you're going to start to lose me in that factory mirror. You should pick me up in my tow mirror, so that's going to give us some extra about five large side steps over with still some room to go here. You can imagine as you're making that corner and that trailer's coming around you, you won't have to stretch around or try to look out your window and see exactly where that tire or where those axles are. Now our K-Source mirror is going to do an excellent job to expand our view as we're heading down the road.
Today on our 2016 Hyundai Tuscan we'll be doing a test fit on the CIPA clip on towing mirror, part number 7070. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park or even back up while towing a trailer. As you can see I'm visible in the towing mirror but not the factory mirror. Now if I take a few steps in toward my trailer, this is the view you get with just the factory mirror. The mirror itself can be rotated 360 degrees, and can be adjusted to most angles. We've got our up and down, side to side, and even diagonal if we want. Over here you can see how the four tabs are not going to interfere with the movement of our mirror, we can even still fold it in.