Free Shipping on Orders Over $99
Custom fit Exhaust for your:
Improve your vehicle's performance, appearance and sound with a Magnaflow exhaust system. Magnaflow's quality construction and lifetime warranty give you a durable product that not only helps your vehicle run better but also makes it look and sound great! Utilize a full cat-back exhaust system, or simply upgrade your vehicle's exhaust system with mandrel-bent, stainless steel tubing and maximize your vehicle's towing power. Whether you're looking for that deep, throaty growl or just looking to replace a failing system, we offer a system to meet your needs.
Find the perfect fit for your vehicle by entering the year on the left. We offer custom-fit exhaust systems for many popular vehicles, including Ford, Mazda, Toyota, Chevy, GMC, Dodge, Honda, Nissan and Infiniti.
What our customers are saying:
A+ Needed it by Tuesday. Had it on Tuesday. And you guys made sure of A+ that... Thanks
Ft Walton Beach, FL
MagnaFlow Turbo Back Exhaust System Installation - 2003 Ford F-250
All right, today on this 2003 Ford F250 Super Duty Super Cab, we're going to show you part number MF18985. This is a MagnaFlow Custom Series Turbo Back Exhaust System constructed from aluminized steel. This is basically a steel exhaust with a protective aluminum coating on top of it. All right, this is what the exhaust looks like once installed on the truck. Right off the bat, we can see that we have it routed towards the right-hand side of a truck, and we have a diameter of 4 inches. It is a steel construction with an aluminum coating on the outside and on the inside of the pipe. It uses 1/2-inch thick rods welded to the pipe here, and it goes up to the factory rubber hangers on the truck.
MagnaFlow Stainless Steel Cat-Back Exhaust System Installation - 2006 Ford F-150
Today on our 2006 Ford F-150 we'll be installing the MagnaFlow Stainless Steel Cat-Back Exhaust System part number MF16616. To begin our install, we'll first need to remove the old or manufacturer's exhaust. Starting at the clamp just behind the Y pipe of the exhaust, we're going to spray it down with some spray lubricant. Note over time this clamp will rust up and can be extremely difficult to get off. In severe cases it may even break. If that happens, it'll be necessary to replace it. In an event where it's so rusted that you can't get a wrench or socket to hold, we'll use a pair of vise grips to try and break it free.
MagnaFlow Cat-Back Exhaust System Installation - 2012 Jeep Grand Cherokee
Today, on our 2012 Jeep Grand Cherokee, we'll be installing the Magna Flow Cat Back Exhaust System, Part Number MF16991. To begin our install, we'll first need to remove the older manufacturer's exhaust. Starting here at the rear of the vehicle, we're going to spray the two rubber isolators, forward and back of the muffler. I'll also go ahead and spray the spring nuts that hold the rear section of the exhaust to the forward section of the exhaust at the exhaust flanges. By spraying the rubber isolators with some spray lubricant, it'll make it easier to remove. We're going to use a pry bar, pliers or, if you have an exhaust hanger removal tool. Starting at the back, we'll begin removing the rubber isolators, noting that on the rear hangers, there's also a metal ground strap.
MagnaFlow Performance Stainless Steel Exhaust System Installation - 2007 Dodge Ram Pickup
Today on this 2007 Dodge Ram Pickup, 2500 Series, Mega Cab, we're going to install part number MF16973. This is the MagnaFlow Performance Stainless Steel Filter Back Exhaust system. Before we get started, we'll go ahead and listen to the sound of our truck so we can compare to it afterwards. Before we begin our install, we'll go ahead and lay out our pieces to get an idea how everything will fit together. First off we have our muffler which we still have in our protective coating while we install it and we'll just hold it up underneath there and get an idea of how it aligns with the factory hangers. Now optionally, this is the straight pipe that eliminates the muffler. Typically, you would use this in off-road applications or racing applications. Now this piece goes over top of the axle.
Camco Gen-Turi RV Generator Exhaust System Manufacturer Review
Joe: Hi. My name is Joe with Camco Manufacturing. Today I would like to talk to you about the Gen-turi Generator Exhaust System. As an Rv-er, you will rely on your generator when there is no power hookup available, but along with the convenience comes undesirable noise and exhaust fumes. Running your Rvs generator produces harmful and potentially deadly carbon monoxide. During Rv rallies and times when there is a large concentration of Rvs, what we call dry camping, exhaust can become on even greater problem, concentrated carbon monoxide can spread up to 15' from the exhaust pipe.
MagnaFlow Cat-Back Exhaust System Installation - 2012 Toyota 4Runner
Today on our 2012 Toyota Forerunner well be installing the MagnaFlow Cat-Back Exhaust System, part number MF15145. Before we install the new MagnaFlow system were going to go ahead and test the old or manufacturer system. Well get an idea of what the exhaust sounds like under a load. Now weve installed our new MagnaFlow system and well go ahead and repeat the same process of putting it under load to see what the new exhaust system will sound like. To begin our install well first need to remove the old or manufacturer system. To make it easier to remove the system well go ahead and spray down the exhaust flange bolts with some spray lubricant. This will make it easier to remove later.
MagnaFlow Stainless Steel Cat-Back Exhaust Installation - 2006 Chevrolet Trailblazer
Today on our 2006 Chevy Trailblazer, well be installing the MagnaFlow Exhaust System Part Number MF16656. To begin our install, well first need to go ahead and remove the old or manufacturers exhaust system. To remove it, were going to go ahead and cut it into a couple of pieces. Using a reciprocating saw, well cut just in front of the rear muffler and then just behind the front muffler. Now with our exhaust system cut in 3 pieces well need to remove the 3 fasteners that secure the front flex pipe flange to the muffler exhaust pipe flange. Note I recommend to spray these with some liquid penetrant because over time theyll build up with rust, dust, dirt and debris, and can be very difficult to remove.
MagnaFlow Rockcrawler Cat-Bat Exhaust System Manufacturer Review - Jeep Wrangler
Thanks for your time today. This is Richard of MagnaFlow and today were going to be installing one of our jeep exhaust systems. We have a variety of different systems out there. Were going to be putting one of our high clearance Jeep Rockcrawler Systems on. Take a closer look. The first step of an installation is installing the inlet pipe.
MagnaFlow Cat-Back Exhaust System Installation - 2003 Chevrolet Tahoe
Today on our 2003 Chevy Tahoe, we'll be installing the MagnaFlow stainless steel cat-back exhaust system, part number MF15666. Now before we install the new MagnaFlow exhaust system, we'll go ahead and take a listen to the manufacturer's or current exhaust system. Next we'll go ahead and begin our install by disconnecting the exhaust here at the flange behind the catalytic converter. To do that, we'll remove the two nuts off the studs. We'll then remove the two rubber isolators from our exhaust pipe and tail pipe. To remove the rubber isolators, use a pry bar, pliers, or exhaust hanger removal tool.
MagnaFlow Cat-Back Exhaust System Installation
Cat-Back Performance Exhaust System Review
On Board Diagnostics
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com