Will the Classic Accessories UTV Windshield # 052963786170 Fit a Yamaha Rhino
The Classic Accessories UTV Windshield, Small-Black 47 inch x 26 inch, # 052963786170, may fit your Yamaha Rhino clone. There would be about a 3/4 inch gap between the windshield and your roll cage bars if you center the windshield. The straps that secure the windshield to the bars are about 7 inches long, which should provide enough length to attach the windshield to the bars. According to our friends at Classic Accessories, this windshield will fit the Yamaha Rhino, however, they do not gu
view full answer...

What are the Dimensions of the Classic Accessories UTV Windshield # CA18028
I went out into our warehouse to pull a Classic Accessories UTV Windshield # CA18028 to get the dimensions and found that overall the measurements are 50-1/2 inches by 31-1/2 inches. I also found that the dimensions of the see-through portion of the windshield are 45-1/2 inches by 26 inches. Check out the picture I attached that shows these measurements. I also attached installation instructions for this product for you to check out also.
view full answer...

Dimensions of Classic Accessories UTV Windshield Part # CA18028
According to our friends at Classic Accessories, their UTV Windshield, part # CA18028 measures 52 inches long by 31 inches high. You can see these measurements in the photo I have produced for you.
view full answer...

Is a Windshield Available for 2011 Polaris Ranger 500
Yes, the Bestop 2-Piece Windshield, part # BU2012201, will fit the 2011 Polaris RZR Ranger. The Bestop # BU2012201 is a 2-piece, UV resistant windshield that will block dust and insects while you are driving your Polaris.
view full answer...

Will the Classic Accessories Vinyl UTV Rear Window fit a 2010 Polaris Ranger XP
Yes, the Classic Accessories Vinyl UTV Rear Window # CA18029 will fit on your 2010 Polaris Ranger XP. I checked with Classic Accessories and confirmed this. I attached installation instructions for you to check out also.
view full answer...

What Are The Dimensions Of The Classic Accessories UTV Windshield # CA18035
I called Classic Accessories and they said the dimensions on the Classic Accessories UTV Windshield # CA18035 is 60 inches long x 34 inches wide.
view full answer...

Will the Classic Accessories Vinyl UTV Rear Window for Polaris Ranger Fit On a 2010 Ranger LE
I do not have direct fit information at this time for the 2010 Polaris Ranger, but I did get the dimensions for the Classic Accessories Vinyl UTV Rear Window - Polaris Ranger, item # CA78657. The Overall width is 60 inches and the overall height is 31 inches. If these measurements correspond to the rear roll cage measurements on your UTV then the rear window will work. The cover is attached with 4 Cinch-tight straps and rip-and-grip closures that let you easily mount the window to the roll cage.
view full answer...

Will the Classic Accessories Vinyl UTV Rear Window fit a 2008 Polaris Ranger 700 XP
The Class Accessories Vinyl UTV Rear Window, product #CA78657, fits all Polaris models, including the 2008 Polaris Ranger 700 XP, and mounts with cinch straps for an easy install. We also carry a UTV Cabin Enclosure, product #052963788839, to fit your Ranger. This mounts to the roll cage in a similar way like the rear window.
view full answer...