Bully Ball Mount Hitch Backup Light Demonstration - Video
Today we are going to show you part number CR-607 from Bully. This is the ball mount hitch light. What this device does is it is a great idea for when you are hitching up to your trailer at night time, it throws an additional light on your hitch and trailer so you can see what you are doing. This mounts easily to any two inch ball mount. You do not have to remove it when you are towing also. It just stays in the same place. You can have it light up with the reverse light on your vehicle or you can optionally wire it to a 12 volt power supply on your vehicle, like the battery, and activate it with the on and off switch behind the lights themselves. more
Watch Video
Posted: 9/30/2009 6:00:01 PM
Wagan Tech Dynamo Charger Flashlight Review - Video
Today we are going to be showing you part number WC2398, this is the bright night dynamo charger flashlight. This is the micro version of that you can also recharge your cell phone in minutes, it has 3 super bright LED bulbs, and 13000 MCD light power. It is rechargeable by a built in hand crank in dynamo. With 2 minutes of winding up you can have 30 plus minutes of light power. It includes cell phone connectors for Motorola, Razor, Nokia and Samsung. We will go ahead and show you how it works. First, to get it charged up, you will pull out this switch here and charge it like so and you wind it up for about 2 minutes, which gives you 30 plus minutes of power for the lights. You press this button on the side which lights up all three lights as you can see here. It also has a flashing function. Also, on this side, you can see there is a plug for the cell phone adapters. You will take one of these 4 adapters here to attach to the cable. We have a USB phone here with us today so we will show you how it works with the USB connection. You just plug it in and then crank the handle and you will get a charge on your phone. If you crank it long enough you will at least be able to make a 2 minute call, for whatever emergency pick up you might need. There you have it for part number WC2398 from Wagan Tech. This is the bright night Dynamo charger flashlight, the micro version. more
Watch Video
Posted: 8/5/2008 10:49:38 PM
Tailgate Light Strip Installation - Video
Today on this 2008 Ford F-150 we will be showing you how to install the Bully LED tailgate fire strip part number TLB-001. The tailgate fire strip installs at the back of the bed in between the tailgate and the bumper. The fire strip installs to that area using a double sided adhesive tape so we will need to clean that area out before we can install it. For video purposes I am actually going to remove the tailgate. That will make it a lot easier. With the tailgate removed we can test fit the fire strip. The kit comes preassembled with the two longer pieces together which for some vehicles will be enough. There is a 24 inch extension piece that can go directly in the middle for vehicles that are a little bit wider. Just give it a test fit to see if you are going to need that extension piece or not. 00:44 more
Watch Video
Posted: 3/8/2010 3:11:46 PM
Wagan Tech 20 LED Work Light and 7 LED Flashlight Review - Video
Today we are going to be showing you part number WC2400. This is the 20 LED Work Light and 7 LED Flashlight from Wagan Tech. This has heavy-duty construction housing and it has 20 bright diodes in the work light and 7 diodes in the flashlight. It has a water-resistant casing and it has a magnetized side for hands-free operation. We are going to go ahead and show you how this works in a moment. more
Watch Video
Posted: 11/21/2008 5:57:00 AM
Putco PURE Headlight Light Installation - 2007 Mazda 6 - Video
Today, in 2007 Mazda 6, we're going to install product number P230100SW from Putco. This is a pure H1 halogen headlight bulb. This is what it looked like before we install the bulbs. Now, we'll go ahead and remove the factory bulbs and install new Putco bulbs. Our headlight bulb is located on the outside of the headlight assembly towards the outside of the body. Behind this cap is the bulb and then there's a little wire latch inside it. more
Watch Video
Posted: 1/16/2012 11:34:27 AM
Oval Amber Directional LED Warning Lights Review - Video
Today we are going to show you the amber flashing hazard lights from Optronics, part number SLL72AB1 and part number SLL72AB2. The flashing hazard lights are designed to be used on emergency, road-side assistance, construction sites and off-road vehicles, along with the rubber grommets, part number A70GB and the straight 3-wire pigtails, part number A45PB. They fit the standardized 6-1/2 inch oval shaped trailer light mounting holes, using the rubber grommets. There are 24 amber LEDs covered by a lifetime warranty. The lights are designed to fit inside the grommets that will hold them snug inside your mounting points. The rubber grommets simply stretch over the lights. On the reverse side of the light there is a port for the pigtail harness. The pigtail harness just fits into the posts and pushes in snug. The wiring for your light is already done at this point. All you have to do is connect the loose ends to the vehicle. 1:03 more
Watch Video
Posted: 11/8/2010 8:30:52 PM
Putco Nitro Blue Halogen Headlight Bulbs Installation - Video
Today we are going to be installing the Putco Nitro Blue Halogen Bulb, part number P239006NB, on a 2002 GMC Envoy. The first step in installing the new halogen will be taking out the headlight assembly. What you want to do is pull up on these two metal tabs. Then, you have to move it back and forth. Just rock it a little bit to pull the assembly out. We have pulled back the headlight assembly but we can not fully pull it out until we disconnect the wires. So we are going to go ahead and do it with the lift side first with this headlight. And this will be the only part that you actually need a tool for. And it is just taking a screw driver and putting it under this tab and pushing up, which releases the pin so you can pull it back with the other hand. That way, you can pull back the headlight, giving you a little bit more working room. 1:00 more
Watch Video
Posted: 3/30/2010 12:10:50 PM
Adjustable Red LED Emergency Light Review - Video
Today we are going to review part number HF18R-MB. The adjustable red LED light. This LED light is the perfect accessory for your emergency vehicle kit. The bright amber LED light is the perfect signal to allow other motorists know that you are in trouble. This light only requires 4 AA batteries, which are not included in the kit. But assembly is simple. :22 more
Watch Video
Posted: 12/28/2009 9:53:12 AM
Adjustable Amber LED Emergency Light Review - Video
Today we are going to review part number HF18A-MB. The adjustable amber LED light. This is the perfect accessory to your emergency kit. The bright amber LED light is the perfect signal to allow other motorists know that there is warning ahead. The adjustable LED light is simply run on 4 AA batteries, which are not included in the kit, but are easily installed. :24 more
Watch Video
Posted: 12/28/2009 9:35:03 AM
Driving Light Installation - 1992 Winnebago - Video
Today on this 92 Winnebago, we are going to install the driving lights, part number NV-509W from Pilot Automotive. What we are going to do on this one is actually replace the existing driver lights on the front of the vehicle and replace them with these Navigator driving lights. So what we are going to do first off is strip of these old lights and start removing some of the wiring too. OK, now we will cut off the rest of the wiring that is inside here and we will replace it with the new wiring that came with the lights. This white wire here goes back inside the cab, going back to the old switch. What we are going to do is actually keep this wire intact and we are going to use this wire to pull our new wires back through. So these three wires here are going to go to the switch that we are going to install inside the cab. We will just tap them together and pull them all the way through and get those started. And we will just leave them alone for now. We have our wires pulled through and we are just going to leave these alone for now. Maybe tie them off or something like that, so they dont get pulled back through. 0:53 more
Watch Video
Posted: 11/24/2009 9:35:43 AM
Pilot Emergency Warning Triangle Kit Review - Video
Today we are going to show you part number MS-911 from Pilot. What this is, it is an emergency warning triangle kit. It is all you need to keep safe in the event of a roadside emergency. This emergency kit has a compact design, which includes a highly reflective tripod ultra-long-life, red LEDs in the baton as well as super-bright LEDs located on top of the unit to provide as a floodlight. We will go ahead and assemble it and show you how it works. more
Watch Video
Posted: 3/2/2009 5:57:56 PM
Wagan Tech Brite Nite Spotlight and Lantern Review - Video
Today we are going to be showing you part number WC2341. This is the Brite Nite by Wagan Tech. This has a 55-watt halogen spotlight. It has a 7-watt fluorescent lantern. It has a bright, LED reading light built into the handle. There are support feet built into the base for the lantern use. And the DC and AC adapters are included to charge in the car or at home. It has an integrated compass built into the handle. It is weatherproof. And we will go ahead and show off some of these features to you. more
Watch Video
Posted: 12/23/2008 9:43:29 AM
Wagan Tech Flashlight, Lantern and Emergency Light Review - Video
Today we are going to be showing you part number WC2477 this is the 3 way light LED. This is a Flashlight, Lantern, and even a emergency flashing light all in one. It has a magnetic end or hanging ring for easy attachment anywhere. It includes 2 magnetic bases you can stick on non metal surfaces to hold the light. The LED bulbs last up to 100,000 hours. It uses 3 double A batteries which are sold separately. Now we have dimmed the lights to show you more contrast so you can see how these lights work. Now simply push this button here, press once and the emergency strobe comes on. You can place it along side your car on a dark night so that people know you are there. If you press it again you have a camping light and if you press it a third time it becomes an actual flashlight with the 3 LED lights. The light has a magnetic top right here and a ring so that you can hang it from things. It comes in handy when you are underneath the hood at night. Lets say you need to check the oil in your car, you can simply stick the light to any metal surface and you have a nice lit area. If that is not enough you use the lantern to provide more light. There you have it for part number WC2477 the 3 way LED flashlight, lantern, and emergency light by Wagan Tech. more
Watch Video
Posted: 8/5/2008 12:56:52 PM
