customer service | view cart 
Today on this 2009 Dodge Ram we will be installing the Tekonsha P3 brake controller along with the wiring harness for it, part number 90195-3020P. The first thing I want to point out is the factory installed 7-pole at the rear of the vehicle and this will be the indicator of whether or not your vehicle is going to have the factory installed brake control port under the dash. The factory 7-pole we are looking for is built into the bumper. It will have the Chrysler logo built on the front. If you do not have this plug you will likely not have the port under the dash that we are going to be plugging into. Thus will have to hardwire your brake controller into the vehicle. 00:38 more
Watch Video
Posted: 1/27/2010 3:10:24 PM
Today on this 2008 Ford F250 Super Duty we will be installing the Prodigy brake controller and adapter plug, part number 90185-3034-P. We are inside the cab of the truck and the first thing we want to do is locate the port we are going to be plugging our adapter into. On these newer F250s they have the option of having the factory installed brake controller in the dash area. Since this does not have one, the plug is actually mounted on the back side of this knockout here. :37 more
Watch Video
Posted: 10/28/2009 1:33:24 PM
Today on this 1999 Dodge, we will be installing part number 90195-3020P. The P3 part. The first thing I want to note on this vehicle here at the rear is the 7-pole plug. This is actually a factory 7-pole plug which is going to allow us simply to plug our brake controller and adapter into place and go. To figure out if you have the factory 7-pole plug, you will note that this has got the welded bracket to the factory installed trailer hitch and if you actually look at the cover of the 7-pole, you will see the Chrysler logo and if you look closely you will see the actual Chrysler name written across the front. Those two indicators will help you know that you have got the correct factory plug. more
Watch Video
Posted: 10/3/2009 9:00:16 AM
Today we are going to do our install on a 2005 Dodge Durango with the tow package from the factory, and we are going to install Part Number 90185, the Tekonsha Prodigy brake controller. And we are also going to install the accompanying brake control harness for the Dodge tow package, and that is Part Number 3020P. To begin our install, we will start with the bracketry to hold our brake controller. And that is actually pretty easy. There is already an existing screw underneath the dash, and we are going to use that. We use a torx bit and we are going to go ahead and take that down. Then we run our bracket right back through it, and we are going to overlap so it will sandwich the plastic back up there like it was originally. more
Watch Video
Posted: 8/28/2008 9:47:01 PM
Filter Videos
Brake Controller Installation - 2005 Dodge DurangoBrake Controller Installation - 1999 Dodge PickupBrake Controller Installation - 2008 Ford F-250 Super DutyBrake Controller Installation - 2009 Dodge Ram PickupSearch
Contact and Help
What our customers said:
Thanks for the good experience. Minus the one part that got shipped later due to availability, the products arrived ahead of the anticipated date. Real to life 'Live Help' is great, hope you can manage to keep it up. If I have further needs, will contact you guys again.
Andrew
Minneapolis, MN
All images, layout and content copyright etrailer.com
