Wiring - Helpful Videos and How To Articles

Wiring Harness Installation - 2003 Mitsubishi Montero Sport - Video

Today we are going to install part number 119175 from Tow Ready, and this is their Circuit Protected Converter Wire Harness. And we are going to install this on a 2003 Mitsubishi Montero Sport. To install this wire harness, we are going to have to get behind both sets of tail lights on this vehicle. We are going to take off the tail lights, get to the wiring behind them, and then we will make our hard-wire connections to the circuits themselves. We will just go ahead and take the lights off loose. The reason why we are taking the lights off is so we can find the function of each wire inside here, rather than just poking a bunch of different holes in the wire. So it saves a little bit of wear and tear on the wire. Next we will take some bolts out and loosen up the fascia so we can run our wires from below up through here, along the edge of the body work and into the tail light. more

Watch Video

Posted: 7/16/2009 2:15:34 PM

Wiring Harness Installation - 2003 Mitsubishi Montero Sport - Video

Today we are going to install part number 119175, the protected tail light converter, and we are going to install this on a 2003 Mitsubishi Montero Sport. We are going to tap in behind the tail lights. I am going to take this off, and then we are going to run a wire on the outside here, underneath the bumper cover. And this is where the converter box will hide, underneath here. All right, the next thing we are going to do is pull this bumper cover away from it. We are just going to use a simple brake tool and just work our way behind it, just enough where you can run a fish wire through there and out the bottom. more

Watch Video

Posted: 5/27/2009 10:40:28 AM

See What Others Are Saying