WeatherTech Window Visor Installation - 2009 Dodge Ram Pickup 1500 - Video

We are going to be installing WeatherTech side window deflectors, part number WT80503. So, I am going to start by installing it here at the front, making sure that this piece is on the outside. We are going to the recessed areas and these are in channel visors. So we want the top sections, the thinned out portion, to go ahead and to sit inside the channel. And then with the front corner ed, we just actually want to go to t he rear section of the air deflector. When it is just sitting on top, it actually overlaps the door quite a bit. So what we are going to have to do is actually fold it down so that it can be ed into the channel. You can see there is quite a bit of flex in t he window visor. You want to make sure that you are not installing this in any weather that is under 50 degrees because that bending of the visor could actually crack the visor if it is not warm enough. 0:47 more

Watch Video

Posted: 4/27/2010 3:47:08 PM

Putco Window Visor Installation - 2009 Dodge Ram - Video

Today we are going to install part number P580178 from Putco, and we are going to install this on a 2009 Dodge Ram full-size pickup. These vent visors will install in the channel with the window, and these will actually have a little bit of adhesive on them to help them stick to the inside of the channel of the door itself. The track that the vent visor fits into is right here, all the way down. And what happens is that the adhesive on the vent visor itself will actually attach to this inside edge on top up here, inside this edge right here. So before you peel the backing off the adhesive, it is a good idea to always do a test of it first. So let us put it right in the channel and just pop it into place. Then you have a good idea of where the adhesive sticks onto the weatherstripping here. more

Watch Video

Posted: 7/24/2009 2:13:21 PM