WeatherTech Window Visor Installation - 2009 Dodge Ram Pickup 1500 - Video
We are going to be installing WeatherTech side window deflectors, part number WT80503. So, I am going to start by installing it here at the front, making sure that this piece is on the outside. We are going to the recessed areas and these are in channel visors. So we want the top sections, the thinned out portion, to go ahead and to sit inside the channel. And then with the front corner ed, we just actually want to go to t he rear section of the air deflector. When it is just sitting on top, it actually overlaps the door quite a bit. So what we are going to have to do is actually fold it down so that it can be ed into the channel. You can see there is quite a bit of flex in t he window visor. You want to make sure that you are not installing this in any weather that is under 50 degrees because that bending of the visor could actually crack the visor if it is not warm enough. 0:47 more
Watch Video
Posted: 4/27/2010 3:47:08 PM
Putco Element In-Channel Window Visor Installation - 2003 Ford F-250 - Video
Alright, today we are going to review part number P580203 from Putco. This is their Element tinted polycarbonate window visor. A couple of features about the window visor is that it has a simple, in-channel installation, so it fits in the same channel as the window itself. It has a moisture-wicking, beaded edge that helps you remove moisture from the visor. It is a precise fit for the vehicle so it is designed for the actual door itself. And also the shape of it reduces wind noise. 0:28 more
Watch Video
Posted: 2/23/2010 12:06:11 PM
Putco Window Visor Installation - 2009 Dodge Ram - Video
Today we are going to install part number P580178 from Putco, and we are going to install this on a 2009 Dodge Ram full-size pickup. These vent visors will install in the channel with the window, and these will actually have a little bit of adhesive on them to help them stick to the inside of the channel of the door itself. The track that the vent visor fits into is right here, all the way down. And what happens is that the adhesive on the vent visor itself will actually attach to this inside edge on top up here, inside this edge right here. So before you peel the backing off the adhesive, it is a good idea to always do a test of it first. So let us put it right in the channel and just pop it into place. Then you have a good idea of where the adhesive sticks onto the weatherstripping here. more
Watch Video
Posted: 7/24/2009 2:13:21 PM
WeatherTech Window Visor Installation - 2000 Chevrolet S-10 - Video
Today we are going to be installing window visors from WeatherTech, part number WT80018, on a 2000 Chevrolet S-10. The first thing we want to do is to do a little bit of prep work to the window. We want to just take and clean the top portion of the window off. We just use a light solvent or just regular soap and water to do this. And you also want to get in and clean out the window sill as well. For this particular set of visors, there is not any sort of adhesive that is going to be used to hold the visors in, so it is not that imperative that we get it that clean. But on some of the visors, there will be additional double-sided tape to help hold it into the sill, and in that case you want to make sure you get it cleaned out really well. more
Watch Video
Posted: 6/5/2009 9:58:02 AM
