Tube Steps - Helpful Videos and How To Articles

Westin Tube Step Installation - 2008 Toyota FJ Cruiser - Video

Today we are going to show you part number 26-3125 from Westin automotive products. What we are going to install are some tube steps on a 2008 Toyota FJ Cruiser. This install will be an relatively easy one to do. There are already threaded bolt holes in the frame which is really nice from the factory. So basically all it is when you hold up the bracket install the bolts and then tighten them down it will be pretty simple. We will do that on 4 points of the vehicle. We will do this here, make sure you do not mess with this cable here for the parking brake. The bracket actually goes around it. So it is pretty hard to mess that up. You have this bracket, and when going towards the front of your vehicle, you will see 2 more threaded holes up by the body mount here. Again it mounts in the very same way it just bolts on. It is identical to this on the driver side also. Before we can begin our install it would be a good idea to run the bolts in and out of the hole a few times. To make sure there is no dirt or junk that would mess up the threads. So it is a good idea to just go ahead and run them in a little bit. We got about 2 threads in and it stopped already. more

Watch Video

Posted: 7/24/2008 10:31:17 AM

See What Others Are Saying