customer service | view cart
Today we are going to install part number 32-2210 from Westin. It is the Bull bar assembly we will be installing on a 2008 Toyota FJ Cruiser. To start our install we will have to install some brackets onto the frame itself and they are tucked up pretty far up in here on the brace that holds the bumper up. There are 2 existing holes so what you need to do is drop 2 bolts into the bumper bracket from the top all the way down through the bottom and it comes with these long bolts to do it with. Now to install one of 2 brackets. There is going to be one here and one is going to have an out rigger from here going out to this bracket to the assembly right here. We do not want to tighten them up yet, we just want to leave them snug so that we have some working room. Next this bracket has to get installed behind it. Then it gets bolted to this assembly here. And then this bracket gets bolted to a threaded hole that is already inside the assembly here. more
Watch Video
Posted: 7/25/2008 11:33:27 AM
Well first start off with part # 34-0850. To install this, its very easy it only requires four toggle bolts, weve already installed three, so with the last one well show you how they go together. The grille cover simply just sits over the original cover and the toggle bolts go behind it and snap into place. Now were going to show you a another grille for the FJ Cruiser, part # 34-0840. This grille bolts on just as the previous part did. This is alternate part # 34-0830, this part lets the Toyota insignia stand out. As you can see all of these grilles will make your vehicle stand out among the rest. Well cover the part numbers one more time. 34-0850 is the bumper grille on the bottom, the grille we have showing right now is part # 34-0830 which is the one that shows the logo. Finally 34-0840 that one does cover up the Toyota insignia. more
Watch Video
Posted: 8/7/2008 2:56:47 PM