Trailer Hitch Installation - 1993 Chevy Geo Prism - Video
Today we are going to be installing part number 24579 from Draw Tite. We are going to install this on a 1993 Geo Prism. The hitch installs in these 3 points on the side of the frame. And on this vehicle we actually have a threaded fittings. Some varieties of this vehicle will not have threads at all. In fact, we would have to drill a hole into the frame to install hardware. In this case we do not have to do that because the 3 holes here are threaded. Also when you install the hitch we will have to make a notch in the sheet metal here to put it in place. We can do that with a simple set of sheers. It will not be too hard to install. Basically you will do the same thing on both sides. The firsts steps involve is to go ahead and take down these bumper straps off the trunk pan here. We will just go ahead and take those off. We just need to pull those out of our way for now. Next what we will do is hold up the hitch and find out where exactly on the sheet metal we need to cut. more
Watch Video
Posted: 8/26/2008 8:01:42 AM
