Wiring Harness Installation - 2006 Toyota Highlander

Custom Fit Wiring

Please select the year of your vehicle to search for a custom fit wiring harness

Add RSS feed to your Google Homepage or Reader

Search By Other Makes

Wiring Help

This Product Fits The Following Vehicles

2008 - 2008 Toyota FJ Cruiser
2004 - 2007 Toyota Highlander
2005 - 2007 Toyota Highlander Hybrid

Products Featured in this Video

Tow Package Wiring Harness with 4 Pole Trailer Connector - Toyota Highlander

118248

$29.95

Installation of a Wiring Harness on a 2006 Toyota Highlander

Today we are going to do an install of part number 118248 the T One connector from Tow Ready. It will be installed on our 2006 Toyota Highlander. To get to our access point which is about down here and underneath this panel. So we will have to roll back the carpeting and pull up the tray and gain access that way. Once you get everything out of the way it is pretty clear that this is the plug right here for the harness. So our T connector can plug right into here. Then our ground wire will actually mount to this ground bolt right here. We took our ground bolt out and we will simply install our ground wire here and run it back through there and install it. Next we will install the module box itself using the self adhesive tape that is on the backside of the connector.

We will hide it back in here in this cavity. Then we can string out our cable here and it is actually stored inside when it is not being used. The last thing we will have to do is install a fuse for our tow package. To install our fuse we will have to get underneath the hood to get to the fuse box here. Which is in this location right here where you will simply install the fuse. Back to the rear of the vehicle we are going to go ahead and zip tie all the loose wires in here into a wire bundle so we can keep everything nice and neat. Now we will go ahead and reinstall the interior. While we are reinstalling our interior there looks to be a little notch here. That is where we are going to push the wire into.

We will bring the leftover into the tray so it can be stored there. That is the install but now I am going to show you how to use it. You have to get back inside and pull your cover up and pull out the harness and leave it out by your hitch. Go ahead and shut the door on it because the door has plenty of wiggle room to make it work. That covers our install of part number 118248 the T One connector from Tow Ready. Installed on a 2006 Toyota Highlander.