Wiring Harness Installation - 2004 Suzuki XL7

Custom Fit Wiring

Please select the year of your vehicle to search for a custom fit wiring harness

Add RSS feed to your Google Homepage or Reader

Search By Other Makes

Wiring Help

Wiring for Towing
more information

Questions and Answers

5 Wire vs 4 Wire System Demonstration

Circuit Testing for Vehicle Wiring

Testing for a Correct Ground Connection Demonstration

T-One Wiring Harness Explanation

Trailer Wiring Harnesses Troubleshooting

Information Categories

This Product Fits The Following Vehicles

1999 - 2004 Chevrolet Tracker 2 and 4 Dr.
1999 - 2005 Suzuki Grand Vitara All, Including XL7
1999 - 2005 Suzuki Vitara
2006 - 2006 Suzuki XL7

Products Featured in this Video

T-One Vehicle Wiring Harness with 4 Pole Trailer Connector

118372

$29.95

Installation of a Wiring Harness on a 2004 Suzuki XL7

This T-1 connector gets mounted inside the vehicle and we have to take out the inside quarter panel. Its a pretty easy, well show you how to do it. The object is we have to get behind this panel over here, but to do that we have to take off this threshold strip because part of the panel lies underneath it. So well take off these tie downs and we should be able to take this threshold off. To get this off theres clips underneath here, you can use a wide screwdriver or gasket scraper. The wider the better to better distribute the force while prying it up. Once you get that off we can start working on this panel here. Now that we have the threshold off we can loosen this panel. We take out these two screws and the rest of the panel kind of pops off. Try to take out as little as possible so you can reach in and get to the connector.

Once you have it open look for this 6 pin port that should match the T-1 connector. Basically it will plug into that, well hide the box inside here, and pull out our length from underneath. At this point we can re-install the panel. Just line up all the pins and it just takes a little time to pop them back together. Now we can put our threshold back into place. Essentially thats the product installed, unfortunately on this model there isnt a compartment to hide the four pole. If you have a cargo mat or liner to put in, just hide it underneath. This door seal is plenty thick so when your door presses on it, it wont hurt the wiring. Well leave just a little bit out and pull out what we need. Even with the door shut we can still pull some out. That covers it for our install of part # 118372 on our 2004 Suzuki XL7.