Wiring Harness Installation - 2000 Toyota Tacoma

Custom Fit Wiring

Please select the year of your vehicle to search for a custom fit wiring harness

Add RSS feed to your Google Homepage or Reader

Search By Other Makes

Wiring Help

This Product Fits The Following Vehicles

1989 - 1995 Toyota Pickup All Except T-100
1996 - 2004 Toyota Tacoma Pickup 2 and 4 WD
1995 - 1996 Toyota Tacoma Pickup 2 and 4 WD, All Models Application starts with 95 1/2
1997 - 1997 Toyota Tacoma Pickup 4 WD Only
1995 - 1996 Toyota Tacoma Pickup 4 WD Only Application starts with 95 1/2

Products Featured in this Video

T-One Vehicle Wiring Harness

118379

$35.70

Installation of a Wiring Harness on a 2000 Toyota Tacoma

This part number will fit 1995-1/2 - 2004 Toyota Tacomas and 1985-1995 Toyota pickups. The first steps involved is taking off the taillight assemblies. Well put them off to the side and then run our wiring inside. We will start on the drivers side first and work our way to the passengers side. Well disconnect the taillight by unplugging this electrical plug here. We will set the taillight assembly off to the side. What were going to do now is install the left hand part of the harness. Were going to follow this harness down through the body and follow that route and we will come back with this part with the yellow wire back up the same way. We will T it off here and well make a couple more connections. Now we will take our ground wire and run it the same way, we will overlap it and ground it to this piece of steel here.

Next we take our T-connector going to our passenger side and run it straight up and follow the wire harness all the way across and run this connector up to the taillight like we did for the other side. At this point we can run up any slack we have with a zip tie. Now we can reinstall our passenger taillight. At this point we can reinstall the drivers side taillight too. Now well zip tie our converter box to place it actually fits nice in this channel box right here, well just pop it back there and zip tie it. Now well route our four pole back over the frame around the original factory harness. Then we will follow it up to right above the hitch here. We will tie it off here for right now. The rest of it well zip tie it to the harness. There you have it for our wiring install, part # 118379 on our 2000 Toyota Tacoma.