Trailer Leaf Spring Replacement Demonstration
Information Categories
Towing
Ball Mounts (10)
Brake Controllers (31)
Hitch Accessories (15)
Tow Bars (7)
Trailer Hitches (124)
Wiring Installations (70)
Cargo
Bike Racks (88)
Cargo Carriers (44)
Cargo Control (24)
Ladder Racks (15)
Trailers
Trailer Parts (17)
Accessories
Backup Cameras (5)
Bug Shield & Air Deflector (3)
Grilles (2)
Locks (54)
Towing Mirrors (7)
Vehicle Accessories (10)
Tonneau Covers (4)
Tools (13)
Vehicle Trim (4)
Demonstration of a Trailer Leaf Springs Replacement
Today were going to show you how to install a typical leaf spring onto a trailer. What we have here is a typical 4 leaf spring on a 3500 pound axle. The first step involved is loosening this bolt here and this bolt here on the bottom and this top one we dont have to worry about for now. The next thing we have to do is loosen these U-bolts here. The nuts are on the bottom, so we loosen these out so we can get our axle away from the spring. What were going to do first is take off this bolt and then well come around and do this one. Were going to let this spring down and our axle is going to hang down a little bit. What we did was keep the axle tight on the other side so it will come down some but it will take off most of the weight so that way we can do one at a time.
If the bolt is jammed in there a few wacks on the hardened bolt will be okay but well put the nut back on to protect the threads a little bit more. With the spring away you might as well take a moment to inspect the shackle links here, this is a part thats supposed to wear down over time. What youll see is that this hole will become oval shaped as the weight sits on the trailer. This ones in pretty decent shape so we wont have to change it out, but if you see any hole egg shaped, its probably time to change it out. Now well re-install our spring bolts with a reversed procedure. What you want to do now is leave the outside spring bolts and mount our U-bolts into place. You want to leave this loose so you can have a little wiggle room. Since we have our bolts in place we can start tightening them down, well start with the U-bolts and well tighten them down equally. Basically well do a criss-cross pattern then back and forth. The main object here is to tighten these down equally, one or two threads difference is not going to make that big of a deal, but its what you want to aim for. Torque wise, you want to make sure the plate is bending up slightly, once youve done that then youre tight enough. Now we go back to our spring bolts and tighten those down. Now well repeat for the other side. There you have it, your spring install is complete.
Related Videos
Vehicle Accessories
Trailer Brakes and Wiring InstallationTrailer Hub Brake Magnet Replacement DemonstrationRemoving and Replacing Trailer Brake Shoes ReviewTrailer Hub Inspection DemonstrationPacking Trailer Bearing DemonstrationRemove and Reinstall a Trailer Hub ReviewRemove, Inspect, and Reinstall Trailer Bearings, Race, and Seals DemonstrationInspecting and Packing Trailer Bearings with Grease DemonstrationTrailer Wiring and Light Replacement DemonstrationTrailer Leaf Spring Replacement DemonstrationRepack Trailer Hub Bearings Demonstration
