Redline Trailer Suspension SP01-160 Review- Video
Today we are reviewing SP 01160. This is a set of two 2-inch square trailer Ubolts and they areused with U-bolt plates for 2-inch square axles. Those are sold separately as part number117594 and that plate, along with these U-bolts will secure the trailer axle to the leaf springsand those are mounted to the trailer frame. So, what you have here are two 9/16th inchdiameter bolts that are, here we go, 5-3/4 inches long. The threaded portion right here, as youcan see, is 2-1/2 inches long and the diameter, inside-to-inside here, is 2 inches. These bolts docome with the nuts that youll need and thats it for Part Number SP 01160 from Redline, 2-inchSquare Trailer U-Bolts..more
Watch Video4/24/2013 1:17:09 PM
Redline Trailer Suspension 11-64 Review- Video
Today we're going to review part number 11-64. This is the Redlinereplacement u-bolt with lock nuts for a 9,000-pound round trailer axle.This u-bolt, when used with another u-bolt like this and a u-boltplate -- which we do sell separately; it would be part number 12-42 -- withthe plate and two u-bolts, it would be used to attach your 9,000-poundround axle to your leaf springs. This does fit the 9,000-pound round axlewith a four-inch diameter. It includes the two lock nuts, and just a quickmeasurement on this. Again, the width here would be four inches, for thefour-inch diameter axle. Now, the length, as measured from the middle tothe edge of this, would be eight and one-eighth inches in length.more
Watch Video4/17/2013 12:15:43 PM
Redline Trailer Suspension 1020 Review- Video
Today, we'll be taking a look at part number: 1020. The 3-Leaf Double-Eye Spring for 2,000-lb axles. This spring does have 3 leaves within it giving it the ability to support 1,000 lbs. When you multiply that by 2 per axle, you get your 2,000 lb axle capacity. Before selecting a new spring for your trailer, there are a few things you do need to know first. This spring measures 20-1/4" long by 1-3/4" wide.more
Watch Video1/31/2012 6:00:10 PM
Redline Trailer Suspension WID2 Review- Video
Today well be looking at part number WID2, the Two-Leaf Slipper Spring for 2,000-lb Axles.When ordering a new spring for your trailer, there are a few things you do need to know first. This spring measures 27 3/8 inches long by 1 inches wide. You will need to know the spring half-length, which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. And this spring has an 13 -inch half-length. One final thing you will need to know is the height of the spring and that is measured from the center of the eye mount to the top surface of the spring and the slipper part. And from that line well measure to the spring surface here at the leaf bolt.more
Watch Video1/20/2012 6:21:33 PM
Redline Trailer Suspension E8536 Review- Video
Today well be taking a look at part number e8536, the 8-Leaf Slipper Spring for 10,000-lb Axles.When ordering a spring for you trailer, there are a few things you need to know first. This spring measures 27 inches long by 2 inches wide. You need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This spring has a 13 -inch half-length. The final thing we need to know is the spring height. To get this measurement, well draw a line from the center of the 9/16-inch mounting hole to the top of the spring here at the slipper.more
Watch Video1/20/2012 6:17:15 PM
Redline Trailer Suspension e5115 Review- Video
Today well be looking at part number e5115, the 6-Leaf Slipper Spring for 8,000-lb Axles.When ordering a spring for you trailer, there will be some measurements that you need to know first. This spring has 27 -inch length by 2-inch width. You need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This spring has 13 -inch half-length. One final measurement you will need to do is the get the spring height. To get this measurement, youll measure from the center of the eye mount drawing a line straight across to the spring surface on the other side of this spring.more
Watch Video1/20/2012 6:13:10 PM
Redline Trailer Suspension 72-77 Review- Video
Today well be reviewing part number 72-77, the 5-Leaf Slipper Spring for 10,000-lb Axles.When ordering a spring for you trailer, you will need to know some things first. This spring has 26 7/8-inch length by 2 inches wide. You will need to know the springs half-length which is measured from the center of the mounting eye to the center of the spring here at the leaf bolt. This spring has 13 -inch half-length. One final measurement you will need to take is the spring height. To get this measurement, youll measure from the center of the eye straight across to the spring.more
Watch Video1/20/2012 6:11:04 PM
Redline Trailer Suspension 72-45-1 Review- Video
Today well be taking a look at part number 72-45-1, the 7-Leaf Slipper Spring for 15,000-lb Axles.Before ordering a spring for you trailer, you do need to know some things first. This spring has a 27 -inch length by 3 inches wide. You also need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. And this spring has a 13 3/8-inch half-length. Another thing you will need to know is the spring height. To get the measurement, well measure from the center of the eye mount straight over to the spring.more
Watch Video1/20/2012 6:09:17 PM
Redline Trailer Suspension 72-44-1 Review- Video
Today we'll be taking a look at part number 72-44-1 the 6-Leaf Slipper Spring for 12,000-lb axles. When ordering a spring for your trailer there is a few things you do need to know first. This spring has a 26-3/4-inch length and a 3-inch width. You will need to know the spring's half-length which is measured from the center of the eye mounting point to the center of the spring here at the leaf bolt. And this spring has a 13 3/8-inch half-length. You will need to know the spring height.more
Watch Video1/20/2012 6:06:57 PM
Redline Trailer Suspension 72-21 Review- Video
Today well be taking a look at part number 72-21, the 5-Leaf Slipper Spring for 10,000-lb Axles.Before ordering a new spring for you trailer, there are a few things you do need to know first. This spring measures 26 7/8 inches long by 2 inches wide. Youll need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This spring has a 13 -inch half-length. One final measurement you do need to get is the spring height. To get this measurement, well draw a line from the center of the mounting hole to the top of the spring surface.more
Watch Video1/20/2012 6:04:16 PM
Redline Trailer Suspension 1203T3 Review- Video
Today well be taking a look at part number 1203T3, the 5-Leaf Slipper Spring for 7,000-lb axles.Before ordering a new spring for you trailer, there are a few things you need to know first. This spring measures 24 7/8 inches long by 2 inches wide. Youll need to know the springs half-length which is measured from the center of the eye mount to the center of the spring at the leaf bolt. This springs half-length is 11 3/16 inches. One final measurement you will need to get is the spring height. This is measured by drawing a line from the center of the eye mount to the top of the leaf surface from the other side.more
Watch Video1/20/2012 6:02:20 PM
Redline Trailer Suspension 093161 Review- Video
Today well be taking a look at part number 093161, the 5-Leaf Slipper Spring for 10,000-lb Trailer Axles.Before ordering a spring for you axle, there are a few things you need to know first. This spring measures 29 inches long by 2 inches wide. Youll need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This springs half-length is 14 inches. One more measurement you will need to take is the springs height. To get this measurement, well draw a line from the center of the eye mount to the top of the leaf surface and then measure from that line to the top of the leaf surface at the leaf bolt.more
Watch Video1/20/2012 6:00:09 PM
Redline Trailer Suspension WIC2 Review- Video
Today we will be looking at part number WIC2, the Two-Leaf Slipper Spring for 1,000-lb Axles. When ordering a new spring for your trailer, there are a few things you do need to know first. This spring measures 23-1/8 inches long by 1 inches wide. You will need to know the springs half-length which is measured from the center of the mounting eye to the center of the spring here at the leaf bolt. This spring has an 11-inch half-length. One more thing you will need to know is the spring height. To get that measurement, we will draw an imaginary line from the center of the eye mount across to the spring on the other side and we will measure from that line to the spring surface here at the leaf bolt.more
Watch Video1/20/2012 12:19:34 PM
Redline Trailer Suspension TE30 Review- Video
Today were gonna be taking a look at part number TE30, the Single-Leaf Double-Eye Spring for 6,000-lb Axles.This spring does only have one leaf within it and it was two 9/16-inch mounting eyes.When ordering a spring for your trailer, there are a few things you do need to know first. This spring measures 25 inches long by 1 inches wide. You will need to know the springs half-length which is measured from the center of the mounting eye to the center of the spring here at the leaf bolt. This springs half length is 12 5/8 inches. The final measurement youll need to know is the spring height. To get this measurement, youll draw an imaginary line from the center of the mounting eye to the center of the mounting eye on either side.more
Watch Video1/19/2012 6:10:17 PM
Redline Trailer Suspension PR722 Review- Video
Today well be reviewing part number PR722, the 3-Leaf Double-Eye Spring for 2,500-lb Axles.When ordering a new spring for your trailer, there are a few things you do need to know first. This spring measures 25 inches long by 1 inches wide. You will need to know the springs half-length which is measured from the center of the eye mount to the center of the leaf bolt here in the center of the spring. This spring has a 12 5/8-inch half-length. One final thing you will need to know is the spring height. To get this measurement, youll draw an imaginary line from the center of the eye mount on either side and using that imaginary line, youll measure from the spring surface giving us our height.more
Watch Video1/19/2012 6:08:39 PM
Redline Trailer Suspension PR427 Review- Video
Today well gonna be taking a look at part number PR424, the 4-Leaf Double-Eye Spring for 3,000-lb Axles.Before ordering a spring for your trailer, there are a few things you do need to know first. This spring measures 27 inches long by 1 inches wide. You do need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This spring has a 13 -inch half-length. One measurement you will need to do is to measure the spring height. To do that, youll draw an imaginary line from the center of the mounting eye to the center of the mounting eye.more
Watch Video1/19/2012 6:04:31 PM
Redline Trailer Suspension PR4 Review- Video
Today well gonna be taking a look at part number PR4, the 4-Leaf Double-Eye Spring for 4,800-lb Axles.Before you order a spring for your trailer, there are a few things you will need to know first. This spring measures 25 inches long by 1 -inch wide. You will need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This spring has a 12 5/8-inch half-length. You will need to know the spring height. To get this height measurement, youll need to draw an imaginary line from the center of the eye mount on either side across.more
Watch Video1/19/2012 6:02:59 PM
Redline Trailer Suspension PR3 Review- Video
Today well be taking a look at part number PR3, the 3-Leaf Double-Eye Spring for 3,500-lb Axles.Youll notice that it does have 3 leaves as indicated in the description. These leaves will give it the ability to support 1,750 lbs. When you multiply that by two, you get your 3,500-lb per axle spring capacity.Youll notice it has two 9/16 mounting eyes. These eyes are lined with a a nylon bushing. The nylon bushing will help to prevent metal on metal contact while the spring is on the trailer.When you order a spring you do need to know a few things first. This spring measures 25 inches long by 1 inches wide.more
Watch Video1/19/2012 6:01:32 PM
Redline Trailer Suspension 1724 Review- Video
Today were gonna be looking at part number 1724, the 3-Leaf Double-Eye Spring for 3,500-lb Axles.When youre ordering a new spring for you trailer, there are a some things you need to know first. This spring measures 23 inches long by 1 inches wide. Youll need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This spring measure 11 inches half-length. A final measurement which you will need to know is the height of the spring. This is measured by drawing a line from the center of the eye mount to the center of the eye mount from either side of the spring.more
Watch Video1/19/2012 6:00:09 PM
Redline Trailer Suspension PR626 Review- Video
Today were going to be reviewing number PR626, the 6-Leaf Double-Eye Spring for 4,500-lb Axles.When ordering a spring there are a few things you do need to know first. This spring measures 26 inches long by 1-3/4 inches wide. You will need to know the springs half-length which is measured from the center of the mounting eye to the center of the spring here at the leaf bolt. This spring has a 13-inch half-length. One final measurement you will need to know is the spring height. To get the spring height youll need to draw an imaginary line from the center of the mounting eye to the center of the mounting eye.more
Watch Video1/19/2012 12:07:24 PM
Redline Trailer Suspension PR5 Review- Video
Today well gonna be taking a look at part number PR5, the 5-Leaf Double-Eye Spring for 5,800-lb Axles.Before ordering a new spring for your trailer, there are a few things you do need to know first. This spring measures 25 inches long by 1-3/4 inches wide. You will need to know the springs half-length which is measured from the center of the eye mount to the center of the spring here at the leaf bolt. This spring has a 12 5/8 inches half-length. One more measurement you will need to know is the spring height. To get the spring height well actually draw an imaginary line from the center of the eye to the center of the eye.more
Watch Video1/19/2012 12:05:46 PM
This Old Trailer: Replacing Shackle Bolts- Video
Today on This Old Trailer, we are going to inspect and replace some shackle links. This part right here is a shackle link. And you can see here, we are actually moving it back and forth. That really should not happen. In fact, you can see if you pull it up how far the hole is worn out. Now, normally when you see a gap down here, it indicates that it is worn out too. That defiantly needs to be replaced. Now, we have the whole trailer on jack stands. And we have an additional jack underneath the axle just to help support it in case something moves around. To remove and replace them, you just have to remove these two bolts right here called the shackle bolts. However, this is a very old trailer and pretty much everything is rusted together. So at this point, we are just going to have to cut them off and start over new. We will go ahead and double check the equalizers as well. 0:51more
Watch Video5/24/2011 11:22:32 AM
This Old Trailer: Replacing Leaf Springs- Video
Today on This Old Trailer, what we will be doing is replacing a broken leaf spring. In this case, the style of the spring is a slipper spring. The first thing we need to do is take off our wheel, which we have already done. We will go ahead and point out the problem. You see this edge on the top leaf of the spring, it used to be right down here, connected in one piece. :33more
Watch Video3/29/2010 5:34:52 PM
Trailer Leaf Spring Replacement Demonstration- Video
Today were going to show you how to install a typical leaf spring onto a trailer. What we have here is a typical 4 leaf spring on a 3500 pound axle. The first step involved is loosening this bolt here and this bolt here on the bottom and this top one we do not have to worry about for now. The next thing we have to do is loosen these U-bolts here. The nuts are on the bottom, so we loosen these out so we can get our axle away from the spring. What were going to do first is take off this bolt and then well come around and do this one. Were going to let this spring down and our axle is going to hang down a little bit. What we did was keep the axle tight on the other side so it will come down some but it will take off most of the weight so that way we can do one at a time. more
Watch Video7/23/2008 3:55:59 AM
