Swagman Specialty Trailer Hitches S64025 Review- Video
Today, were reviewing Part Number S64025 from Swagman. This is an RV bumper adapter thatprovides a 2-inch trailer hitch receiver. It clamps onto your RV bumper to give you this receivertube, to which you can attach what would otherwise be a hitch-mounted accessory like a bikerack. Where we have foam blocks right here. That would be your bumper. You have the bottomplate here, your bumper and the top plate up here.more
Watch Video4/24/2013 2:17:44 PM
Curt Specialty Trailer Hitches C19101 Review- Video
Today we're going to review part number C19101. This is the Curt RV Bumper Hitch. This hitch is designed for RV bumper use only, has a two inch square receiver opening right here which is ideal for hitch accessories that are RV approved such as bike racks and cargo carriers. It is intended to be used on a two inch square RV bumper on the rear of many RVs and towboat campers. It does have a nice black powder coat finish which will help resist corrosion. Includes the mounting hardware which is the two carriage bolts and the hex flange nuts all included.more
Watch Video4/24/2013 10:18:23 AM
Curt Specialty Trailer Hitches E-100 Review- Video
Today were going to review part number E-100. This is the Curt RV Bumper 2 Inch Trailer Hitch Receiver. This Curt RV bumper mount trailer hitch has a two inch square receiver opening, which is ideal for RV approved hitch accessories, such as bike racks and cargo carriers. This is intended for use on four inch square channel bumpers on the rear of many RVs and towable campers. It does have a black powder coat finish, which will resist corrosion. It does include the mounting hardware, the two carriage bolts and the two hex flange nuts.This hitch does have a weight capacity of 3,500 pounds gross towing weight capacity and a 350 pound tongue weight capacity.more
Watch Video12/27/2012 1:16:15 PM
Trailer Hitch Installation - Ameri-Lite Gulf Stream Trailer - Curt- Video
Today on our hitch mounted pull behind camper well be installing the Curt adjustable width trailer hitch receiver, part number 13703. Before we can secure the hitch to the trailer we need to go ahead and slide the side brackets onto the receiver tube and mount it into place. Its a good idea to have an extra set of hands to help you put your hitch into position. To hold it into position you can use jacks, clamps, or even blocks of wood so that it will hold it into place so that it will allow you to use the hitch as a template to pre-drill the attachment points. Were working with a box channel so well be using all six attachment points on each side. Therell be four on the side of the frame and two in the bottom.more
Watch Video10/8/2012 3:49:17 PM
