Pilot Automotive Lights BLS-1101 Review- Video
Watch Video5/21/2013 10:23:17 AM
Custer Lights HF20RL Review- Video
Today were reviewing part number HF20RL from Custer. This is a rotating amber warning light. It is SAE class 3 light. The lights themselves are LEDs. This is cordless and it mounts by magnetic power and its a very strong magnetic pull. So let me show you.more
Watch Video4/26/2013 1:18:21 PM
Putco Lights P920556 Review- Video
Today were reviewing part number P920556 from Putco. This is a set of their Pure LED roof lamps for your Dodge Ram model years 2003 through 2009. These five lamps replace those that are currently on your roof. So you simply remove the current ones and then attach these to the connector on your roof. They have a smoke-tinted lens and a bright amber LED set of lights in here. You have three LEDs in there and LEDs, as you know, will last thousands of hours as opposed to incandescent bulbs which last only a few hundred hours and they also warm up much more quickly than incandescent bulbs.more
Watch Video4/25/2013 11:20:31 AM
Putco Lights P280150 Review- Video
Today were reviewing part number P280150 from Putco. This is a pair of LED Headlamp DayLiners that are made of chromed aluminum and are going to add a little bling to your Chrysler 300 or 300c model years 2005 to 2010. As you know, LED lights provide thousands of hours of bright white light, and theyre going to resist corrosion because of that chromed aluminum construction and they apply like an applique. On the back is pre-applied 3M automotive tape. The same kind thats used in the factories. So they mount right underneath of your head lamps and they can wire into your low beam headlamps or to your daytime running lights.more
Watch Video4/25/2013 11:18:28 AM
Putco Pure Premium LED Festoon Dome Light Bulb Review- Video
Today were going to review the Putco Pure Premium LED Festoon Dome Light Bulb, part number p230150. The Putco Festoon light has a life of 50,000 hours. Its also covered by a lifetime warranty. Its designed to be 18 times brighter than traditional incandescent bulbs. Our original Festoon bulb is an incandescent light that produces a lot of heat and a yellow colored light. Our LED replacement is not going to produce hardly any heat and it will provide a nice bright white light.more
Watch Video3/14/2013 7:37:53 AM
Putco PURE Headlight Bulbs Installation - 2005 Chevrolet Tahoe- Video
Today on our 2005 Chevy Tahoe, well be installing the Putco Pure High Performance Halogen light bulb, part number p239006sw. This will be bulb type 9006 that will carry 55 watts at 12 volts and has a one year warranty. To replace the bulb, well simply open up the hood and then for this application we need to remove the headlight bucket. To do this well remove the two pins that secure it in position by turning the pin 45 degrees well go ahead and release it from its lock and pull up removing it. Well go ahead and work the headlight bucket out to where we get access to the wiring. Now well go ahead and take the low beam or outside light socket out of the headlight bucket by turning it, unlocking it from its tabs.more
Watch Video3/14/2013 7:36:18 AM
CIPA EVO Formance Mega LED Dome-Light Kit Review- Video
Today well be reviewing the Cipa Evo Formance Mega LED dome light kit, part number CM93346. This Formance Mega LED dome kit comes with a light board and four adapters. The light board of this kit is two inches long by three quarter inches wide, and has 10 bright LEDs. Now well go ahead and go over the adapters. It comes with a 194 wedge, a twist socket, a one and a quarter inch festoon and one and a half inch festoon. The back side of the light board has a sticky adhesive to stick to the top of the inside of the dome light.more
Watch Video2/8/2013 2:51:36 PM
Putco Stick T-Type LED Bulb Review- Video
Today were going to review the Putco Stick type LED bulb, part number P28003W-P. These LED lights are designed to fit in your 194 wedge style light bulb socket. These lights have an estimated life of 50,000 hours and are made here in the U.S.A. They produce a white light at a color temperature of about 6,000 kelvin, and put off about 100 lumens of light. On the top of the stick is where well find our single diode that produced our light. The lights are built on printed circuit boards that have the same contacts back here as your 194 glass wedge style bulbs would have.more
Watch Video1/15/2013 12:20:13 PM
Putco PURE Light Installation - 2007 Toyota FJ Cruiser- Video
Today on our 2007 Toyota FJ Cruiser well be installing the Putco Pure Premium 7443 LED bulbs, part number P237443R360. First well open up the rear cargo door. Then well remove the access panel behind the drivers side tail light assembly. Well be accessing the white wire connector and brown socket. This is for the tail light, stop lamp circuit. To remove the white wire connector youll press on the locking tab and then remove it from the socket.more
Watch Video12/20/2012 1:14:19 PM
Westin Driving Lights Installation - 2006 Ford F-150- Video
Today in our 2006 Ford F150, we'll be installing the Westin driving lights. Part number 09-0205. On this vehicle we'll be installing the lights onto the Western light bar, part number 37-02015. We'll be installing four lights in total. Let's go ahead and mount our lights first. To mount the light, we'll simply remove the nut and lock washer, install the light on the light bar and then reinstall the lock washer and then the nut and then tighten them down.more
Watch Video10/23/2012 7:41:19 AM
Optronics Off Road Lights Installation - 2006 Ford F-150- Video
Today in our 2006 Ford F150, we'll be installing the optronics 6-inch round, 100 watt halogen off-road lights. Part number MH100W. We will also be using the Optronics relay wiring kit, part number A-720. Our first step will be mounting the lights. Because the design of our light bulb we'll not be able to use the manufactures lower, rubber or metal washers. We're going to replace that with a 1/2-inch plat washer and then secure it with the manufacturer's split lock washer and nut.more
Watch Video10/23/2012 7:31:22 AM
Optronics Lights HB-2010 Review- Video
Today, we're going to review part number HB-2010. This is the Optronic glare-free spotlight. It's a magnet mount and it does have Blue Eye Beam technology. Normally, in inclement weather, a powerful spotlight will just increase the blinding power of the conditions, not your field of vision. What's nice about this magnet-mount spotlight, it's a glare-free spotlight which will offer visibility options in unfavorable conditions. It does have two settings.more
Watch Video9/25/2012 9:22:14 AM
Pilot Automotive Navigator Off Road Light Installation - 2003 Ford F-250- Video
All right. Today on this 2003 Ford F-250, we're going to install part number NV-802C. Now, well actually be installing four of these on this vehicle. Well also be using the wiring kit, part number A-720. We're going to start off by installing the switch base onto a removable panel, that's below the steering column. Now, to transfer the pattern from our switch onto the backside of the panel.more
Watch Video6/4/2012 4:13:30 PM
Putco G2 LED Headlamp Day Liners Installation - GMC Sierra- Video
Today I'm going to show you how to install Putco's new G2 LED Day Liner. First thing you want to do is lay out the tools you'll need for this installation. These are the tools for the Silverado Sierra, Suburban and Tahoe. Instead of pliers a 7-milimeter ratchet, 10-millimeter ratchet and a flat head screw driver. The first step in the installation process is removing the eight clips that attach to the top cover. It's simply removed with a flat head screw driver.more
Watch Video4/27/2012 2:40:51 PM
Putco G2 LED Headlamp Day Liners Installation - Ford F-250- Video
Today Im going to show you how to install Putcos new G2 LED Day Liner. First thing you want to do is lay out the tools youll need for this installation. These are the tools needed for the SuperDuty, a 10mm ratchet and a flathead screwdriver. Next step is you want to remove the grill to give better access to the headlight bolts that are located behind it. Now that the four bolts have been removed from the top, theres one clip on the side that attaches the cover. Pull that out.more
Watch Video4/27/2012 2:40:19 PM
Putco G2 LED Headlamp Day Liners Installation - Ford F-250- Video
Today Im going to show you how to install Putcos new G2 LED Day Liner. First thing you want to do is lay out the tools youll need for this installation. These are the tools needed for the SuperDuty, a 10mm ratchet and a flathead screwdriver. Next step is you want to remove the grill to give better access to the headlight bolts that are located behind it. Now that the four bolts have been removed from the top, theres one clip on the side that attaches the cover. Pull that out.more
Watch Video4/27/2012 2:39:46 PM
Putco G2 LED Headlamp Day Liners Installation - Ford F-150- Video
Today Im going to show you how to install Putcos new G2 LED Day Liner. First thing you want to do is lay out the tools. These are the tools needed for the F-150, a Phillips screwdriver and a 10mm ratchet. The next step is to gain access to the headlight. Theres a Phillips clip that attaches the cover to the headlight. Simply unscrew it and it will come off.more
Watch Video4/27/2012 2:39:19 PM
Putco G2 LED Headlamp Day Liners Installation - Dodge Ram- Video
Today Im going to show you how to install Putcos new G2 LED Day Liner. First thing you want to do is lay out the tools for doing your first installation on this Dodge Ram. You will need 10mm ratchet, a pry bar and a flathead screwdriver. Your next step in this installation process is to use the pry bar and pry it up on the clips. After the top cover has been removed, remove the four bolts that attach the top of the grill to the radio support. After the four top bolts have been removed, theres two clips on both sides of the grill.more
Watch Video4/27/2012 2:38:18 PM
Putco G2 LED Headlamp Day Liners Installation - Chevrolet Tahoe- Video
Today Im going to show you how to install Putcos new G2 LED Day Liner. First thing you want to do is lay out the tools youll need for this installation. These are the tools for the Tahoe. Set of pliers, 7mm ratchet, 10mm ratchet and a flathead screwdriver. Now you're going to want to remove the six 10mm bolts attaching the grill to the radio support. Now that the six bolts have been removed, its time to remove the two 10mm bolts holding the headlight to the radio support.more
Watch Video4/27/2012 2:37:30 PM
Putco G2 LED Headlamp Day Liners Installation - Chevrolet Silverado- Video
Today Im going to show you how to install Putcos new G2 LED Day Liner. First thing you want to do is lay out the tools youll need for this installation. These are the tools for the Silverado, Sierra, Suburban and Tahoe. Set of pliers, 7mm ratchet, 10mm ratchet and a flathead screwdriver. The first step in the installation process is removing the eight clips that attach to the top cover. You simply remove with a flathead screwdriver.more
Watch Video4/27/2012 2:36:56 PM
Putco PURE Headlight Light Installation - 1998 Ford Mustang- Video
All right, today on this 1998 Ford Mustang we're going to install part number P239007SW from Putco. This is a pure high performance halogen bulbs. The ion spark white version. First of all, we're going to go ahead and shave our original factory bulbs on this car since '98. They were replaced these with Putco bulbs and see what difference we have. So, let's go ahead and open up the hood and we'll go ahead and remove the factory bulbs.more
Watch Video2/10/2012 11:06:18 AM
Putco PURE Headlight Light Installation - 2007 Mazda 6- Video
Today, in 2007 Mazda 6, we're going to install product number P230100SW from Putco. This is a pure H1 halogen headlight bulb. This is what it looked like before we install the bulbs. Now, we'll go ahead and remove the factory bulbs and install new Putco bulbs. Our headlight bulb is located on the outside of the headlight assembly towards the outside of the body. Behind this cap is the bulb and then there's a little wire latch inside it.more
Watch Video1/16/2012 11:34:27 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - Chevy Silverado- Video
Start by gently removing your dome light cover. Then, remove the old factory bulbs from their sockets. Install your new Pure LED lights by placing the metal brackets into the sockets. Once installed, carefully replace the cover and repeat these steps with your other consol lights as well. Congratulations, you have just installed your new Putco LED dome lights. Enjoy!more
Watch Video9/21/2010 10:11:31 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - Ford F-150- Video
Start by removing your dome light. Once removed, twist the light bulb out of the dome light. Remove the factory bulb from the socket and replace it with your Putco light. Replace the dome light. And congratulations, you have just installed your new Putco LED dome lights. Enjoy!more
Watch Video9/21/2010 10:09:15 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - Ford F-150- Video
Start by removing your dome light. Once removed, twist the light bulb out of the dome light. Remove the factory bulb from the socket and replace it with your Putco light. Replace the dome light and continue onto your other lights. Start by removing your dome light. Then remove the old factory bulbs from their sockets. Install your new Pure Led lights by placing the metal brackets into the sockets. Once installed, carefully replace the cover. And congratulations, you have just installed your new Putco LED dome lights. Enjoy!more
Watch Video9/21/2010 10:06:09 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - Nissan Titan- Video
Start by gently removing your dome light cover. Then, remove the old factory bulbs from their sockets. Install your new Pure LED lights by placing the metal brackets into the sockets. Once installed, carefully replace the cover and repeat these steps with your other consol lights as well. Congratulations, you have just installed your new Putco LED dome lights. Enjoy!more
Watch Video9/21/2010 9:52:13 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - Ford Super Duty- Video
Start by removing the dome light cover and then remove the middle factory bulb. Use a flathead screw driver to remove the screws. Once the screws are removed, take the dome light cover off. Make sure to unplug it. Remove the metal backing of the other two factory bulbs. Take them out and then replace them with your new Putco LED lights by placing the brackets into the socket. Plug the dome light back in and then put it back in its place by screwing it in. Replace the middle factory bulb with your new Putco LED light. Put the cover back on and repeat these steps with your other dome light. Congratulations, you have just installed your new Putco LED dome lights. Enjoy!more
Watch Video9/21/2010 9:49:01 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - GMC Yukon- Video
Start by gently removing your dome light cover. Then, remove the old factory bulbs from their sockets. Install your new Pure LED lights by placing the metal brackets into the sockets. Once installed, carefully replace the cover and repeat these steps with your other consol lights as well. Congratulations, you have just installed your new Putco LED dome lights. Enjoy!more
Watch Video9/21/2010 9:26:21 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - Toyota FJ Cruiser- Video
Gently remove the dome light cover with a screw driver, making sure not to force it out. With the cover off, remove the bulb by pushing on the metal tab holding it in. Now, replace that bulb with your new Putco LED light by placing the brackets in place of your old factory bulb. Snap the dome light cover back into place. And congratulations, you have just installed your new Putco LED dome light.more
Watch Video9/21/2010 5:01:01 AM
Putco PURE LED Dome-Light Kit Manufacturer Installation - Cadillac Escalade- Video
Start by gently removing your dome light cover. Then, remove the old factory bulbs from their sockets. Install your new Pure LED lights by placing the metal brackets into the sockets. Once installed, carefully replace the cover and repeat these steps with your other consol lights as well. Congratulations, you have just installed your new Putco LED dome lights. Enjoy!more
Watch Video9/21/2010 4:30:12 AM
Putco Vendor Information- Video
Hey guys, its Matt Payne with Putco. I wanted to talk to you a little bit about the history of our company. What we are known for and where we are headed. It was the first company in the industry to have pattens on the original running board. The name of the company stands for Pickup Trailer Company. It was founded by a blacksmith who was making trailers and selling those. He bought a truck and his wife could not get into it, fabed up a running board and then got patents filed on it. For the last ten years outside of our stainless steel truck accessory core we have gotten into grill s that are clamp on style grills. We have also launched a full line of chrome trim accessory items that tape on to your vehicle mirror covers, door handle covers, and chrome accents all the way around the truck, car, or SUV. 00:45more
Watch Video6/11/2010 5:34:18 AM
Putco Nitro Blue Halogen Headlight Bulbs Installation- Video
Today we are going to be installing the Putco Nitro Blue Halogen Bulb, part number P239006NB, on a 2002 GMC Envoy. The first step in installing the new halogen will be taking out the headlight assembly. What you want to do is pull up on these two metal tabs. Then, you have to move it back and forth. Just rock it a little bit to pull the assembly out. We have pulled back the headlight assembly but we can not fully pull it out until we disconnect the wires. So we are going to go ahead and do it with the lift side first with this headlight. And this will be the only part that you actually need a tool for. And it is just taking a screw driver and putting it under this tab and pushing up, which releases the pin so you can pull it back with the other hand. That way, you can pull back the headlight, giving you a little bit more working room. 1:00more
Watch Video3/30/2010 12:10:50 PM
Tailgate Light Strip Installation- Video
Today on this 2008 Ford F-150 we will be showing you how to install the Bully LED tailgate fire strip part number TLB-001. The tailgate fire strip installs at the back of the bed in between the tailgate and the bumper. The fire strip installs to that area using a double sided adhesive tape so we will need to clean that area out before we can install it. For video purposes I am actually going to remove the tailgate. That will make it a lot easier. With the tailgate removed we can test fit the fire strip. The kit comes preassembled with the two longer pieces together which for some vehicles will be enough. There is a 24 inch extension piece that can go directly in the middle for vehicles that are a little bit wider. Just give it a test fit to see if you are going to need that extension piece or not. 00:44more
Watch Video3/8/2010 3:11:46 PM
Driving Light Installation - 1992 Winnebago- Video
Today on this 92 Winnebago, we are going to install the driving lights, part number NV-509W from Pilot Automotive. What we are going to do on this one is actually replace the existing driver lights on the front of the vehicle and replace them with these Navigator driving lights. So what we are going to do first off is strip of these old lights and start removing some of the wiring too. OK, now we will cut off the rest of the wiring that is inside here and we will replace it with the new wiring that came with the lights. This white wire here goes back inside the cab, going back to the old switch. What we are going to do is actually keep this wire intact and we are going to use this wire to pull our new wires back through. So these three wires here are going to go to the switch that we are going to install inside the cab. We will just tap them together and pull them all the way through and get those started. And we will just leave them alone for now. We have our wires pulled through and we are just going to leave these alone for now. Maybe tie them off or something like that, so they dont get pulled back through. 0:53more
Watch Video11/24/2009 9:35:43 AM
Bully Ball Mount Hitch Backup Light Demonstration- Video
Today we are going to show you part number CR-607 from Bully. This is the ball mount hitch light. What this device does is it is a great idea for when you are hitching up to your trailer at night time, it throws an additional light on your hitch and trailer so you can see what you are doing. This mounts easily to any two inch ball mount. You do not have to remove it when you are towing also. It just stays in the same place. You can have it light up with the reverse light on your vehicle or you can optionally wire it to a 12 volt power supply on your vehicle, like the battery, and activate it with the on and off switch behind the lights themselves. more
Watch Video9/30/2009 6:00:01 PM
