DeeZee Invis-A-Rack Folding Ladder Rack Review- Video
Today I'll be reviewing the Invis-a-Rak Folding Ladder Rack part number dz951600. This pop up, truck bed ladder rack lets you carry ladders, lumber, pipes and more. And it folds away easily when not in use. It also has specially designed accessories which are sold separately that will allow you to strap on a kayak, a canoe or hunting gear. The fold away design gives you a sleek look while allowing for easy access to your truck bed. The rack collapses and stores inside the built incase on the bed rails by simply pushing the pins in and folding it away.more
Watch Video3/1/2013 4:14:18 PM
DeeZee Invis-A-Rack Folding Ladder Rack Installation- Video
Today I'll be install the Invis-a-Rack Folding Ladder Rack part number dz951600. This rack is easy to install and requires no drilling.We'll begin our installation on the drivers side part of the bedrail. We'll start off by installing the rubber pad on the first part of the ladder rack. For todays demonstration purposes we will not be actually installing the pad onto the ladder rack. After doing so, we'll set the front part of the ladder rack onto the bedrail. Notice that the lip of the ladder rack slides down on the inside of the bedrail.more
Watch Video3/1/2013 4:13:13 PM
Thule Xsporter Pro Truck Bed Ladder Rack Installation- Video
Today well be installing part number TH500 from Thule. This is the Xsporter Pro truck bed ladder rack. Weve got a lot of parts. Were going to start off all our parts laid out for one half of the ladder rack. Well start off by taking one of the crossbars and go ahead and install the rubber strip. Well line it with the edge and work our way over.more
Watch Video2/13/2013 8:28:12 AM
Thule Xsporter Pro Truck Bed Ladder Rack Review- Video
Today were going to review part number TH500 from Thule. This is their XSporter Pro truck bed ladder rack. A few things to know that this rack has aerodynamic load bars that you can have 32 different heights, giving you a wide variety of load carrying versatility. This ladder rack has four binding rails that clamp onto the truck. Theres no drilling or cutting required. For each half of the ladder rack theres going to be four clamps, and one of the clamps will be a locking style.more
Watch Video2/8/2013 8:56:49 AM
TracRac TracONE Truck Bed Ladder Rack Review- Video
Today well be reviewing the TracRac TracONE truck bed ladder rack fixed mount weighed in at 800 pounds, part number ta27000-01. This truck bed rack lets you carry ladders, lumber and more with ease. Its aerodynamic design reduces dragging wind noise. The electrical crossbars are streamlined to minimize wind resistance. The air foil trip strips prevent air from whistling through the slots. There is no drilling required for this installation and its quick and easy.more
Watch Video1/31/2013 8:21:49 AM
Thule Xsporter Multi-Height Aluminum Truck Rack Review- Video
Today, we're going to review the Thule Xsporter Clamp-On Truck Bed Ladder Rack, part number TH422XT. The Xsporter is a clamp-on style ladder rack. There's no drilling involved. It utilizes a system of clamps that will clamp the rack to your bed rails. The rack is lockable so you can secure it to your vehicle. With the locks engaged, you can't remove the crossbars and if the crossbars can be removed, then you can't remove the system from the truck.more
Watch Video7/6/2012 4:34:03 PM
Thule Xsporter Truck Rack Installation - 2012 Ford F-150- Video
Today on our 2012 Ford F-150, we're going to install the Thule Xsporter Truck Bed Rack, part number TH422XT. First, we're going to need our four upright supports and our upright rails, and we're going to assemble them together. We'll insert our upright rails into the upright support and line up the slots. Once you have the slot lined up, you can close the cam handle, securing the upright rail into the support. We'll assemble all four of the upright rail assemblies. The next thing we need to do is clean up our bed rails.more
Watch Video7/6/2012 4:28:57 PM
DeWalt Ladder Rack Installation - 2005 Ford F-150- Video
Today on this 2005 Ford F150 Long Bed, were going to be installing the Dewalt Industrial Grade Steel Truck Rack, part number DIGFFR360. Before we actually get started installing the truck rack system, we need to do a little bit of pre-assembly. And the first thing we need to do is just to figure out which side rail setup we need for our particular truck, so you want to go ahead and measure the length of the bed first and per the instructions, you determine the setup that you need for the side mounting rails. Now, the particular setup were using today is a long bed and its a 99-inch bed, so were going to need not only the long base rail, but two of the short base rails as well which when installed, this is going to look something like this. We can go ahead and start aligning the long base rail and what we want to do is go ahead and center it on the side rail of the truck not only front to back but side to side as well. Go ahead and do that for the passenger's side rail as well.more
Watch Video2/13/2012 1:09:51 PM
TracRac Cantilever for G2 Ladder Rack Installation - 2006 Ford F-150- Video
Today in this 2006 Ford F150 with an eight-foot bed were going to add cantilever over the cab extension part number TA44000-02. Well be adding this to our tack rack kit TA21000-02. In order to add our cantilever kit we need to replace the sidles on our existing rack. What well do is go ahead and remove the bolt for the cross bar and then remove the bolt for the sidle unit. Then repeat the same process on the passenger side. Now we got our tension points loosen up.more
Watch Video12/21/2011 8:10:10 AM
TracRac G2 Sliding Truck Bed Ladder Rack Review- Video
Today were going to take a quick overview of the Tracrac G2 slider Inaudible 00:00:09 rack system with cantilever over the cab extension part number ta21000-02-02. This kit is made up of 3 components, the base rail system that sits along the top of your truck bed, the fighter G2 racks and finally the cantilever extension that goes over the cab of the truck. On top of the base rails, we have our uprights and crossbars that will attach to the base rails and will slide along. To slide the track and reposition it, all we have to do is loosen the hand knobs and the uprights and crossbar slide right along our rails, that way we can set it at whatever spread we need to for whatever ladders or materials were hauling. Once you get your position all you have to do is tighten down the hand knobs and youre ready do go. On each of the 4 uprights, youll find this large tie down where there is enough space where you can hook it ratchet straps or you can rope to help you secure whatever load youre carrying.more
Watch Video12/12/2011 3:04:55 PM
TracRac G2 Sliding Ladder Rack Review- Video
Today we are going to do a quick over view of the Tracrac G2 Slider Rack on a 2005 Ford F150. It is part number ta21000-02. The Tracrac G2 uses a set of base rails that attach to the top of the bed rails on your truck. On top of the base rails we have our uprights and crossbars that attach to the base rails and slide along. To slide the Tracrac and reposition it, all we have to do is loosen the hand knob, and the uprights and crossbar slide right along our rails. That we can set it at whatever spread we need to for whatever ladders or material we are hauling.more
Watch Video11/21/2011 11:04:08 AM
TracRac G2 Sliding Ladder Rack Installation - 2006 Ford F-150- Video
Today were working on a 2006 Ford F150 with an eight foot bed. Were going to install the TracRac overhead rack system, part number TA21000-02. For installation, well first need to install our base rail kit. The base rails stand up on the edge of the bed rails. They are side, front to back specific so you need to make sure you identify the correct base rail for the driver and passenger side. Once weve done that well need to mark the holes that will be our mounting points.more
Watch Video11/21/2011 10:46:35 AM
Bestop BestRail Sliding Ladder Rack Installation- Video
Today, on this 2004 F-250 Super Duty, we will be installing the Bestop Bestrail overhead rack part number B42730-791. We are going to start by assembling the components of the overhead rack system. The first thing we are going to assemble is the legs to the front bracket both left and right. We are going to start with the front left bracket first. We are going to take one of the legs and you can see we have four existing holes here in the left bracket. You want to take one of the legs and you will notice that one end has a flat edge to it, the other end is actually angled. We want the angled side to be down here attaching to the bracket and we want the lower edge in towards the bottom of the bracket here where it will flare up towards the inside of the truck bed here. What we want to do is just align the holes here in the leg with the holes in the bracket. Over here on the side holes we are going to be using the 1/4-20 by 3 1/4 inch flat head screws along with a flat washer and nut. On the inboard side holes, we are going to be using the 1/4-20 by 2 ΒΌ inch screws along with a flat washer and nut. And we want to repeat that procedure for the front right bracket as well. 1:38more
Watch Video12/30/2009 8:50:18 AM
