Westin Safari Light Bar Installation - 2000 Jeep Grand Cherokee- Video
Watch Video5/22/2013 2:20:32 PM
Westin Off-Road Light Bar Installation - 2006 Ford F-150- Video
Today on our 2006 Ford F150 well be installing the Westin Light Bar, part number 37-02015. Since this vehicle is equipped with manufacture tow hooks, well need to remove those first. As per the instructions, we can reuse the manufacturers hardware. Well go ahead and remove the two tow hooks. There are two fasteners for each tow hook. Note, the fastener secured to a nut plate in the frame.more
Watch Video10/23/2012 7:44:20 AM
Westin Driving Lights Installation - 2006 Ford F-150- Video
Today in our 2006 Ford F150, we'll be installing the Westin driving lights. Part number 09-0205. On this vehicle we'll be installing the lights onto the Western light bar, part number 37-02015. We'll be installing four lights in total. Let's go ahead and mount our lights first. To mount the light, we'll simply remove the nut and lock washer, install the light on the light bar and then reinstall the lock washer and then the nut and then tighten them down.more
Watch Video10/23/2012 7:41:19 AM
Westin Sportsman Grille Guard Installation - 2010 Chevrolet Silverado- Video
Today in this 2012 Chevrolet Silverado, we're going to install part number 45-2310 from Westin. This is their bull bar. First step is to go ahead and open the hood and remove the radiator cover to gain access to the factory gill shell. We'll have to remove eight small push pins. Now, we'll go ahead and remove the four bolts from the grill shell. Now, we can go ahead and remove the grill.more
Watch Video8/10/2012 12:35:45 PM
Pilot Automotive Light Bar Installation - 2003 Ford F-250- Video
Watch Video6/4/2012 4:13:17 PM
Bestop HighRock Bumper Installation - 2012 Jeep Wrangler Unlimited- Video
Today on our 2012 Jeep Wrangler Unlimited, were going to be installing the Bestop HighRock Narrow Front Bumper, part number B4293301. This will be in conjunction with the Bestop Tubular Grill Guard, part number B4291501. Our first step is going to be removing the lower rock guard. As you removed the lower rock guard, there will be a total of six fasteners. These are screw-in pushpin fasteners. Well need to screw out the center of the fastener and then remove the pushpin part.more
Watch Video5/3/2012 12:46:08 PM
Westin Bull Bar Installation 2008 Toyota FJ Cruiser- Video
Today we are going to install part number 32-2210 from Westin. It is the Bull bar assembly we will be installing on a 2008 Toyota FJ Cruiser. To start our install we will have to install some brackets onto the frame itself and they are tucked up pretty far up in here on the brace that holds the bumper up. There are 2 existing holes so what you need to do is drop 2 bolts into the bumper bracket from the top all the way down through the bottom and it comes with these long bolts to do it with. Now to install one of 2 brackets. There is going to be one here and one is going to have an out rigger from here going out to this bracket to the assembly right here. We do not want to tighten them up yet, we just want to leave them snug so that we have some working room. Next this bracket has to get installed behind it. Then it gets bolted to this assembly here. And then this bracket gets bolted to a threaded hole that is already inside the assembly here.more
Watch Video7/25/2008 6:33:27 AM
