Curt Balls C40001 Review- Video
Today, we're reviewing Part Number C40001 from Curt. This is 1-7/8 inch diameter hitch ball with a short shank and a capacity of 2,000 pounds. This ball has a nice, shiny chrome finish that will resist rust and corrosion. And as you can see, it has wrench flats on two sides making it easier to install. The shank length is 1-1/2 inches and the shank diameter is 3/4 of an inch. This hitch ball does come with a 1-1/8 inch nut and lock washer that you need for installation.more
Watch Video4/22/2013 12:15:58 PM
Curt Balls C40041 Review- Video
Today we're reviewing part number C40041. This is the Curt Trailer Hitch Ball with a 2-5/16" diameter and a medium shank. The towing capacity is 30,000 lbs. This hitch ball has a raw machine finish, and it does include your wrench flats to help you with your installation. The shank measures (see if we can do it this way, here we go) 2-5/8" in length, and 1-1/4" in diameter. This fits draw bars from 3/4" to 1" thick.more
Watch Video4/3/2013 1:15:32 PM
Tow Ready Balls 19286 Review- Video
Today were going to take a look at the Tow Ready 2 5/16 inch diameter hitch ball with medium shank, number 19286. This trailer hitch ball has a diameter of 2 5/16 inches. It is corrosion and rust resistant. Were going to take a look at some measurements here. The length of the shank is 2 3/4 inch. The diameter is 1 1/4 inches, and this ball has a weight capacity of 12,000 pounds.more
Watch Video3/8/2013 2:16:11 PM
Tow Ready Balls 19247 Review- Video
Today were going to take a look at our Tow Ready 2 inch diameter hitch ball with medium shank, number 19247. This is a trailer hitch ball with a 2 inch head. Corrosion and rust resistant. The 2 inch size is our most popular size. Take a look at some of the measurements here. The length of the shank is 2 1/8 inch.more
Watch Video3/8/2013 2:15:39 PM
Tow Ready Balls 19260 Review- Video
Today we are going to review part number 19260, the chrome hitch ball with 1-7/8 inch diameter and medium sized shank from Tow Ready. The shank length on this hitch ball is 2-1/8 inches and the diameter is 1 inch. It has wrench flats on the side, so you can hold it it place tightly while you install it on the draw bar.more
Watch Video3/8/2013 8:15:55 AM
Convert-A-Ball Balls 902B Review- Video
Today were going to review part number 902B. This is the Convert-A-Ball interchangeable ball set; contains three different hitch ball sizes and a shank. The shank is a solid stainless steel one-inch diameter shank; comes with a three different size hitch ball the 2 5/16, the two-inch and the 1 7/8 and they all are stamped on the top with the size of the hitch ball. This is a nice item to have if youre towing different size trailer couplers. Youd be able to change out your hitch ball size for another ball size very easy. You just pop out the integrated pin that is on the hitch ball and then replace with any size hitch ball unto the shank.more
Watch Video6/27/2012 1:17:48 PM
Convert-A-Ball Balls 900B Review- Video
Today were to review part number 900B. This is the Convert-A-Ball Interchangeable Ball Set. This ball set will come with a chrome, one-inch diameter long shank, comes with a three hitch balls, a 1 7/8-inch which is usually marked right on the top, the two-inch which should be marked there and the largest 2 5/16. This does have a 10,000 pound gross towing rate capacity. It is corrosion and rust-resistant and what this does is it makes changing out your Convert-A-Ball hitch balls with another ball size very easy; you just pop out the pin like that pin there and you replace it with any ball size that youre going to be towing. It includes the shank and the three heavy-duty balls.more
Watch Video6/27/2012 10:18:54 AM
Convert-A-Ball Balls 901B Review- Video
Today we're going to review Part # 901B. This is the Convert-A-Ball interchangeable ball set. This ball set will contain a chrome 1 inch diameter shank. It will contain 2 hitch balls, one a 2 inch diameter, another 1 7/8 inch diameter. It does contain the 1 1/2 inch nut and washer that is used to tighten the shank to the ball mount. It also comes with the cotter pin which one is tighten down will slide through the hole and then attach to keep the nut in place.more
Watch Video6/26/2012 3:19:29 PM
Convert-A-Ball Balls 800B Review- Video
Today we're going to review Part #800B, this the Convert-A-Ball interchangeable ball set. This ball set will come with a chrome, 3/4 inch diameter shank. Its comes with the two hitch balls, one is 1 7/8 inch which is marked right on top and the other is a 2 inch which is also marked on top of the hitch ball. It comes with the nut which is use as a 1 1/8 inch wrench and washer and that is used to attached the shank to your ball mount and it also comes with a cotter pin that will actually slide through after you get it tight into where you want it and the cotter pin would be installed to keep the nut from coming off. This has a 3500 lb. gross towing rate capacity.more
Watch Video6/26/2012 3:17:55 PM
Review of a Tow Ready Hitch Ball with 2 Inch Diameter- Video
Today we are going to show you a 2 inch diameter hitch ball from Tow Ready part number 19258. This hitch ball has a 3,500 pound gross trailer weight capacity. The diameter of the ball itself is 2 inches, so it will work with all 2 inch trailer couplers. The shank on the ball is ¾ inch diameter and it is 1 and 9/16th inches long. It will work on draw bars that have a platform thickness of 3/8th inches to 5/8th inches. 0:34more
Watch Video7/21/2011 11:02:38 AM
Draw-Tite Trunnion Style Weight Distribution Kit Installation- Video
This part is good for 1,200 pounds tongue weight and 12,000 pounds trailer weight. Before we start we need to take care of a few preliminary steps, first its good to get the trailer in line at a nice level spot then take it apart and get some measurements off of it and well show you what measurements you need. The first measurements we need are on the truck itself. Were going to measure from the top of the wheel well down to the ground. The reason for these measurements is to make sure we get the truck back to its original height or as close as possible. Finally we need the coupler height with the trailer level on the ground. Just to make sure we need to measure from the ground to the top of the wheel well. On the front wheel we have 39-1/2 inches, and at the rear axle we have 41-1/2inches. from the ground to the top of the coupler we have about 23 inches. more
Watch Video8/14/2009 3:32:10 PM
