Draw-Tite Ball Mounts 3593 Review- Video
Watch Video6/19/2013 9:21:37 AM
Andersen Rapid Hitch Ball Mount Review - 2013 Toyota Tundra- Video
Watch Video6/18/2013 3:18:53 PM
Convert-A-Ball Ball Mounts AMSC12 Review- Video
Watch Video6/18/2013 12:42:38 PM
Curt Ball Mounts D-4 Review- Video
Watch Video6/18/2013 2:24:08 AM
MaxxTow Tow Strap Loop Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:52:36 PM
Draw-Tite Ball Mount Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:46:16 PM
Convert-A-Ball Pintle Mounting Bar Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:43:45 PM
Convert-A-Ball Cushioned Pintle Hook Combo Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:42:46 PM
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:40:56 PM
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:40:28 PM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:39:18 PM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:38:07 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:37:11 PM
Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2013 Toyota Tundra- Video
Watch Video6/17/2013 5:36:00 PM
Trailer Hitch Installation - 2012 Jeep Grand Cherokee - Bosal- Video
Watch Video6/14/2013 1:53:42 PM
Diversi-Tech Ball Mounts DTALBM6425-3S Review- Video
Watch Video6/13/2013 12:26:24 PM
Draw-Tite Ball Mount Review - 2013 Honda Odyssey- Video
Today on our 2013 Honda Odyssey, we'll be test-fitting the Draw Tite ball mount with three quarter-inch rise or two-inch drop part number 2923. To begin our test-fit we'll go ahead and get our hitch height. This is measuring from the ground to the inside top edge of our receiver tube. We have a hitch height of two inches. Now we'll go and pick our ball mount and install it in the drop position. We'll just line up the pinhole and then insert our pin and clip.more
Watch Video6/11/2013 8:24:45 AM
Draw-Tite Ball Mount Review - 2013 Ford Edge- Video
Today on our 2013 Ford Edge, well be test fitting the Draw-Tite Ball Mount part number 2923. We want to measure the hitch height, thats the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will defer depending on exact model, tire size or any other attachment add-ons that you may have. The hitch height on our particular vehicle today is 13 inches. Now, we can go ahead and mount the ball.First, well mount it in the drop position. Well insert the shank and the receiver tube of our hitch.more
Watch Video6/5/2013 4:30:09 PM
Curt Tri-Ball Mount Review - 2013 Ford Edge- Video
Today, on our 2013 Ford Edge well be test fitting the Curt Tri-Ball Mount part number c45001. To begin our test fit we need to go ahead and get our hitch height. This is from the ground to the inside top edge of our receiver tube. We have a hitch height of 13 1/2 inches.Now, we can go ahead and slide the shank of our ball mount into the opening of the receiver hitch tube. We can then go ahead and align the pin hole and then secure it with our pin and clip. We can then turn the tri-ball mount to either the left of the right side to access the 2 inch ball or the 1 7/8 inch ball.more
Watch Video6/5/2013 4:29:43 PM
Trailer Hitch Installation-2012 Jeep Grand Cherokee - Bosal- Video
Today on our 2012 Jeep Grand Cherokee we'll be installing the Bosal Hidden Euro-Style Trailer Hitch, part number bsl047143. As you will see with the hitch installed on the vehicle you will not even notice that there is a hitch in place. It is completely hidden under the rear fascia of the vehicle.The Bosal Hidden Euro-Style Trailer Hitch does not come with any of the attachments for the hitch but Bosal recommends the use of two different attachments; the receiver adapter in the two inch by two inch, part number bsl043964 as well as the ball mount adapter in a two inch with a three and a half inch rise, which is part number bsl044004.Now let's go ahead and install our hitch. Here's the locations that we'll be using to mount our hitch. There are four-two on each side. We'll be removing some factory hardware and we will reuse the factory hardware from each side.more
Watch Video6/4/2013 10:03:37 AM
Draw-Tite Ball Mounts 63012 Review- Video
Today, we're going to take a look at the Draw-Tite Pintle Hook Combo, Number 63012. This is a pintle hitch combo with a 2-5/6 inch trailer hitch ball. It will mount directly to your bumper if you have a heavy duty reinforced bumper or you can hook it up to a pintle hook mount and will show you how to do that in just a moment.The pintle capacity for this item is 16,000 pounds, maximum growth towing weight capacity. The weight capacity of the hitch ball is 14,000 pounds and it has a 3,000 pound towing weight capacity or a vertical load limit. The ball hole diameter right here is 1-1/8 of an inch. Looking at the mounting platform here from the center here to center here, top to bottom is 1-1/3 of an inch; and side to side, center to center is 3-3/8 of an inch.All the mounting hardware that you see here is also included.more
Watch Video5/30/2013 2:22:43 PM
Reese Ball Mounts RP45322 Review- Video
Watch Video5/28/2013 12:41:33 PM
Tow Ready Ball Mounts 63014 Review- Video
Today we're going to take a look at the TowReady pintle hook, number 63014. This pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper. It has a gross towing weight capacity of 20,000 lbs., and a tongue weight capacity of 4,000 lbs. As you can see, the mounting hardware is included. It has four mounting holes, as you can see here. And we'll do a quick measure.more
Watch Video5/28/2013 12:19:38 PM
Draw-Tite Ball Mounts 63057 Review- Video
Today, we're going to take a look at the Draw-Tite Pintle Hook Mount, number 63057. This pintle hook mount slides into a 2 inch trailer hitch to provide a mounting location for a pintle hook, and I'll demonstrate how that will work in just a moment. It has a solid shank for added strength, has a towing capacity of 12,000 pounds, and a ton weight capacity of 1,200 pounds. Again, this fits a 2 inch trailer hitch. The length of the shank from the center of the pin hole to the front of the mounting plate is 7-5/8 of an inch. From the center of the pin hole to the end of the shank that slides into the hitch is 3-1/4 inches.more
Watch Video5/24/2013 12:20:50 PM
MaxxTow Tow Strap Loop Review - 2012 Jeep Grand Cherokee- Video
Watch Video5/24/2013 11:48:12 AM
MaxxTow Ball Mount Review - 2012 Jeep Grand Cherokee- Video
Today on our 2012 Jeep Grand Cherokee, we'll be test fitting the MaxxTow Ball Mount with a 2 inch Accessory Receiver rated at 5,000 pounds, part number MT70066. This ball mount is a great option for you to tow your trailer or boat while also carrying a 2 inch receiver accessory. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 14-1/2 inches. Keep in mind that this measurement may vary due to hitch style, tire size, or aftermarket accessory that may alter the ride height of the vehicle. We'll now begin our test fit by sliding the shank of the ball mount into the opening of the hitch, lining up our pin holes, and securing it with the pin and clip.more
Watch Video5/24/2013 11:42:57 AM
Tow Ready Ball Mounts TR63011 Review- Video
Today, we're going to take a look at the Tow Ready Pintle Hook Combo with Two-Inch Ball, Number TR63011. This is a Pintle hitch and it also features a two-inch hitch ball that can be either a Draw-Tite, Hidden Hitch or Reese Hitch Ball.The way this works, you will first remove the pin and clip that just slides. As you can see, it is attached to the product with a small lightweight chain, you will lift the lever here and then that would be open and you can back your tow vehicle into the trailer, hook the coupler right there then you would lift the lever again that locks in place.For an additionally secure ride, you'd pop that pin and clip back in and that will prevent your lever from moving up and potentially unhitching your trailer.Some of the specs and dimensions for this item, the weight capacity for the pintle is 16,000 pounds of gross towing weight. The tongue weight capacity is 3,000. The ball capacity is 10,000.Taking a look at some measurements here from center to center, side to side is 3-3/8 of an inch; center to center, top to bottom that is 1-1/8 of an inch.Now to use this, you can either bolt it directly to a heavy duty bumper on your truck, you would just mount that on there and the mounting pieces are included -- the nuts, bolts and washers or you can use one of these. This is a Draw-Tite Pintle Hook Mount, Number 63057.more
Watch Video5/24/2013 11:19:28 AM
Convert-A-Ball Cushioned Weight Distribution Shank Review - 2012 Jeep Grand Cherokee- Video
Today, on a 2012 Jeep Grand Cherokee, we'll be test fitting the Convert-A-Ball Cushioned Weight Distribution Shank for Two-Inch Hitches, Part Number AMAC1.Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. We got a measurement of 14-1/2 inches.Keep in mind that this measurement will vary due to hitch style, tire size or any other aftermarket accessory.We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch, lining up the pinholes and securing it with the pin and clip.You can also flip the ball mount over into the rise position to give you some additional height.This ball mount can be used with a pintle hook combo with balls, which is sold separately; a ball mount adapter, which is also sold separately; and a Clevis Pin Adapter. You can choose the best accessory to fit your trailer configuration.That completes today's test fit for the Convert-A-Ball Cushioned Weight Distribution Shank for Two-Inch Hitches, Part Number AMAC1 on our 2012 Jeep Grand Cherokee.more
Watch Video5/24/2013 11:05:04 AM
Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2012 Jeep Grand Cherokee- Video
Today, on our 2012 Jeep Grand Cherokee, we'll be test fitting the Convert-A-Ball Cushioned Ball Mount for Two-Inch Hitches with an 8-3/4-inch Rise or a 10-inch Drop, rated at 10,000 pounds, Part Number AMSC10.Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the top inside edge of our receiver tube. This measurement is about 14-1/2 inches.Keep in mind this measurement may vary due to hitch style, tire size or any other aftermarket accessory that will alter the ride height of your vehicle.Now that we've established our hitch height, we'll begin our test fit by sliding the ball mount shank into the opening of our hitch. We'll do this in the rise position as the vehicle does sit too low to the ground to be applicable in the drop position. We'll line-up our holes and secure the ball mount to the hitch with a pin and clip.We'll then measure from the ground to the top of the ball platform; we'll get a measurement of about 23 inches. If the hitch height of your vehicle matches the hitch height of our vehicle and your trailer's ride height, which is the measurement from the ground to the bottom of your trailer's coupler while your trailer's level matches this measurement, this should be an appropriate ball mount for you.That completes today's test fit for the Convert-A-Ball Cushioned Ball Mount for Two-Inch Hitches with an 8-3/4-inch Rise or a 10-inch Drop, rated at 10,000 pounds, Part Number AMSC10 on our 2012 Jeep Grand Cherokee..more
Watch Video5/24/2013 10:51:02 AM
Hidden Hitch Ball Mount with 4 Inch Drop Review - 2012 Jeep Grand Cherokee- Video
Watch Video5/24/2013 10:38:55 AM
Andersen Rapid Hitch Ball Mount Review - 2012 Jeep Grand Cherokee- Video
Today, on our 2012 Jeep Grand Cherokee, will be test fitting the Rapid Hitch Adjustable, Aluminum Ball Mount with Two Chrome Balls with 5-1/2 inch Drop, Part Number AM3410.We'll first begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch, line-up our pinholes and secure with the pin and clip. We can then pull the pin here to adjust the platform of the ball mount to fit your trailer's right height.We can now flip the ball mount over into the rise position, and as you can see we can pull the same pin to adjust the height of our ball platform to fit the right height of your trailer and also access the different size ball.That completes today's test fit for the Rapid Hitch Adjustable, Aluminum Ball Mount Kit with Two Chrome Balls, Part Number AM3410 on our 2012 Jeep Grand Cherokee.more
Watch Video5/24/2013 10:35:11 AM
Curt Ball Mounts D210 Review- Video
Today were going to take a look at our Curt Multipurpose Ball Mount with 2 receiver for bike racks and cargo carriers, #D210. This specific ball mount allows you to carry hitch accessories while towing, such as bike racks and cargo carriers, using this 2-inch receiver. The pin and clip, as you can see here, is sold with this product. Whenever you receive it, you will find the pin and clip inside the shank right here. Looking at some of the measurements for this item, the shank here is 2 inches, so thatll work with a 2-inch trailer hitch. The trailer ball is sold separately and it needs to be a ball with a 1-inch diameter shank.more
Watch Video5/22/2013 12:20:06 PM
Diversi-Tech Adjustable Ball Mount Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe we will be test fitting the Diversi-Tech self-locking adjustable aluminum ball mount with two chrome balls with a six-inch drop and a seven-inch rise, right in at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, and turn the lock to engage the interlocking hitch pins on the inside of the ball mount. Now, as you can see, with using the key, you can adjust the length of the drop of the ball mount as well as switching it over to the other ball. We now can flip the ball mount over into the rise position and still see that the ball mount platform can be raised or lowered as well as flipping the ball mount over to use a different size ball. Now when choosing a ball mount for your trailer, you will first need to measure your trailers ride height.more
Watch Video5/21/2013 11:35:34 AM
Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe we will be test fitting the rapid hitch adjustable aluminum ball mount gate with two chrome balls for the 5.5 inch drop, part number AM3410. Now before we begin our test fit, we will need to first obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, line up our pinholes, insert our pin through our pinholes, and secure the clip on either side. You can notice that in the drop position, we can pull the pin here to adjust to the different height of our ball. Well now flip the ball mount over into the rise position and using the same pin that we used to lower it in the draw position, we will pull that pin out to adjust the height of our ball platform. Now, when choosing the best ball mount for your trailer, you will need to measure your trailer ride height, which is the measurement from the ground to the bottom of the coupler when your trailer is level.more
Watch Video5/21/2013 11:19:39 AM
Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe we'll be test fitting the Curt Multi-Ball Adjustable Ball Mount for 2 Inch Hitches, part number d900. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and we'll get a measurement of 24 inches.Now to begin our test fit in the drop position we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes and secure the clip on the other side. Now with this ball mount you do have access to the three different size balls from the pin here. The ball platform can adjust up and down by the two pins here. We'll now flip the ball mount over into the rise position and as you can see we can still have access to the three different size balls as well as the ability to adjust the ball platform up and down with the two pins here.more
Watch Video5/20/2013 3:34:13 PM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 Inch Hitches with a 6-3/4 Inch Rise or 8 Inch Drop Rated at 10,000 Pounds, part number amsc8. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube where we'll get a measurement of 24 inches.To begin our test fit, in the drop position we'll slide the shank of the ball mount into the opening of the hitch, insert our pin through our pin holes and secure the clip on the other side. We'll then measure from the ground to the top of the ball platform and we'll get a measurement of 16 inches. We'll then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform and we'll get a measurement of 31 inches.When choosing a ball mount for your trailer youll first need to measure your trailer's ride height. This is the measurement from the ground to the bottom of the coupler when your trailer's level.more
Watch Video5/20/2013 1:46:47 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the Convert-a-ball cushioned ball mount for 2-inch hitches with a 3/4-inch rise or a 2-inch drop rated at 10,000 pounds, part number amsc2. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit in the drop position well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. Well now measure from the ground to the top of the ball platform and well get a measurement of 22 inches. Well then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform, and well get a measurement of 25 inches. When choosing a ball mount you will first need to determine your trailers ride height which is the measurement from the ground to the bottom of the coupler.more
Watch Video5/20/2013 1:45:48 PM
Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the Convert-a-ball cushioned ball mount for 2-inch hitches with an 8 3/4-inch rise or a 10-inch drop rated at 10,000 pounds, part number amsc10. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. To begin our test fit in the drop position well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. Well then measure from the ground to the top of the ball platform and well get a measurement of 14 inches. Now using this ball mount in the rise position would not be designed for this vehicle. When choosing a ball mount for your trailer you will first need to measure your trailers ride height.more
Watch Video5/20/2013 1:44:47 PM
Draw-Tite Ball Mount Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the Draw-Tite ball mount 3/4 inch rise or 2-inch drop rated at 6,000 pounds, part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and well get a measurement of 24 inches. Well now begin our test fit by installing the ball mount on to the vehicle. In the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin, and secure with the clip on the other side. Well then measure from the ground to the top of the ball platform and well get a measurement of 22 inches.more
Watch Video5/20/2013 12:57:25 PM
Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the Curt Multi-Ball adjustable ball mount for 2-inch hitches part number d900. Well begin by going ahead and getting our hitch height measurement. To get this measurement, you measure from the ground to the inside top edge of the receiver tube. We have a measurement of 19 1/4 inches. Now well go ahead and take our ball mount, slide the shank of our ball mount into our receive tube, line up the pin hole, and install our pin and clip. Well go ahead and mount it in the rise position first.more
Watch Video5/3/2013 12:30:51 PM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the cushioned ball mount for 2-inch hitches a 1-inch rise or a 2-inch drop rated at 14,000 pounds, part number amsc2hd. To begin we need to go ahead and get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height for this vehicle is 19 1/4 inches. Now well go ahead and slide the ball mount shank into the receiver tube of our hitch, line up the hitch pin hole, and secure it with the pin and clip. First we begin in our drop position.more
Watch Video5/3/2013 12:30:20 PM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the Convert-a-Ball cushioned ball mount for two-inch hitches with a 6 inch rise or 8 inch drop rated at 10,000 pounds, part number amsc8. Now to begin well go ahead and get our hitch height measurement. To do this well measure from the ground to the inside top edge of the receiver tube opening. Our hitch height for this vehicle is 19 1/4 inches. Keep in mind that your measurement can vary due to hitch styles, tire sizes, or any other accessory that may affect your vehicles ride height. Now we can go ahead and slide the shank of our ball mount into our hitch, line up the pin hole, and install our hitch pin and clip.more
Watch Video4/24/2013 10:28:04 AM
Convert-A-Ball Pintle Mounting Bar Review - 2013 Chevrolet Silervado- Video
Today on our 2013 Chevrolet Silverado, we'll be test fitting the Convert-A-Ball Cushioned Adjustable Pintle Mounting Bar for 2-inch hitches rated at 10,000 pounds. This is part number AMPC2. This eight-hole mounting bar lets you adjust the pintle height to level your trailer. Its cushioned shank protects your equipment and smoothes your ride. Now before we install our pintle mount, we need to go ahead and get our hitch height measurement. To do this, we'll measure from the ground to the inside top edge of our receiver tube.more
Watch Video4/24/2013 10:27:37 AM
Diversi-Tech Adjustable Ball Mount Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the self-locking, adjustable, aluminum ball mount, part number dtalbm6600. To begin well go ahead and get our hitch height measurement. This is the measurement from the ground to the inside top edge of our receiver tube. This vehicle has a hitch height of 19 1/4 inches. Now well go ahead and install our ball mount. To install our ball mount well slide the shank of the mount into the receiver tube of our hitch, line up the pin hole and then install our pin and clip.more
Watch Video4/24/2013 10:26:51 AM
Draw-Tite Ball Mounts 40330 Review- Video
Today we are reviewing part number 40330 from Draw Tite. This is a forged one piece ball mount with a one inch rise or a two inch drop. The towing capacity is 16,000 pounds and the towing rate capacity is up to 2,400 pounds. As you can see it has a drop of two inches from the top of the shank to the ball mount platform and it has a rise of one inch from the top of the shank to the ball mount platform. It measures from the center of the hitch pin-hole which is here to the center of the ball hole-which is here and that is eight and one half inches. The ball mount platform itself is one inch tall.more
Watch Video4/22/2013 2:15:54 PM
Hidden Hitch Ball Mounts 80232 Review- Video
Today, we're reviewing Part Number 80232 from Hidden Hitch. This is a Class 3 Ball Mount with a 3-1/4 inch rise or a 2-inch drop and a super extra long shank. The towing capacity rating is 6,000 pounds and the tongue weight is rated at 600 pounds. As you can see the shank is hollow and it is cut at an angle. It makes it a little easier for you to slide this into your receiver. This uses a ball with a 1-inch shank diameter.more
Watch Video4/22/2013 1:16:31 PM
Hidden Hitch Ball Mount with 4 Inch Drop Review - 2013 Ford Escape- Video
Today on our 2013 Ford Escape, well be test fitting the Hidden Hitch ball mount 4-3/4 rise or a 6 drop at 6,000 pounds, part number 80240. To begin our test fit we need to measure our hitch height, this is from the ground to the inside top edge of our receiver tube, we have about 13-1/2. Now well go ahead and install our ball mount, well do this in the drop position first. Well go ahead and take the shank of our ball mount and put it into the receiver tube of our hitch. Well line up the hitch pin hole and then thread in the 5/8 hitch, pin and clip.With the ball mount in the dropped position, we get a measurement of 7 and this is from the ground to the top of the ball platform. Make sure were measuring your trailer height, you so when your trailer is level, measure from the ground to the bottom of the coupler, if your measurement matches ours than this will be a great fit for you.Now we can take our ball mount out, flip it over to the rise position, in this position well get a measurement of 18.more
Watch Video4/22/2013 9:56:32 AM
Andersen Rapid Hitch Ball Mount Review - 2005 GMC Sierra- Video
Today, on our 2005 GMC Sierra, we'll be test-fitting our Rapid Hitch adjustable aluminum ball mount kit with two chrome balls, part number am3410. Now, to begin our test-fit, we'll need to go ahead and get out hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now, on this truck, that measurement is 20-and-a-half inches. Now, keep in mind that the measurement can change die to tire size, hitch style, or any other accessory which may change your vehicle's ride height, so it's a good idea to measure yours.We'll now go ahead and slide the shank of the ball mount into the hitch, lining up the hitch pin hole, and installing our pin and clip. That will secure the ball mount to our Sierra.more
Watch Video4/19/2013 3:16:17 PM
Andersen Rapid Hitch Ball Mount Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500 well be test fitting the Anderson Rapid Hitch Adjustable Aluminum Ball Mount with two chrome balls with a 6 inch rise or a 5 inch drop, part number am3410. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other after-market accessories. Now to begin our test fit well slide the shank of the ball mount in the drop position into the opening on the hitch, line up our pin holes and secure the ball mount with the pin and clip.more
Watch Video4/19/2013 10:36:18 AM
