Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the Curt Multi-Ball adjustable ball mount for 2-inch hitches part number d900. Well begin by going ahead and getting our hitch height measurement. To get this measurement, you measure from the ground to the inside top edge of the receiver tube. We have a measurement of 19 1/4 inches. Now well go ahead and take our ball mount, slide the shank of our ball mount into our receive tube, line up the pin hole, and install our pin and clip. Well go ahead and mount it in the rise position first.more
Watch Video5/3/2013 12:30:51 PM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the cushioned ball mount for 2-inch hitches a 1-inch rise or a 2-inch drop rated at 14,000 pounds, part number amsc2hd. To begin we need to go ahead and get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height for this vehicle is 19 1/4 inches. Now well go ahead and slide the ball mount shank into the receiver tube of our hitch, line up the hitch pin hole, and secure it with the pin and clip. First we begin in our drop position.more
Watch Video5/3/2013 12:30:20 PM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the Convert-a-Ball cushioned ball mount for two-inch hitches with a 6 inch rise or 8 inch drop rated at 10,000 pounds, part number amsc8. Now to begin well go ahead and get our hitch height measurement. To do this well measure from the ground to the inside top edge of the receiver tube opening. Our hitch height for this vehicle is 19 1/4 inches. Keep in mind that your measurement can vary due to hitch styles, tire sizes, or any other accessory that may affect your vehicles ride height. Now we can go ahead and slide the shank of our ball mount into our hitch, line up the pin hole, and install our hitch pin and clip.more
Watch Video4/24/2013 10:28:04 AM
Convert-A-Ball Pintle Mounting Bar Review - 2013 Chevrolet Silervado- Video
Today on our 2013 Chevrolet Silverado, we'll be test fitting the Convert-A-Ball Cushioned Adjustable Pintle Mounting Bar for 2-inch hitches rated at 10,000 pounds. This is part number AMPC2. This eight-hole mounting bar lets you adjust the pintle height to level your trailer. Its cushioned shank protects your equipment and smoothes your ride. Now before we install our pintle mount, we need to go ahead and get our hitch height measurement. To do this, we'll measure from the ground to the inside top edge of our receiver tube.more
Watch Video4/24/2013 10:27:37 AM
Diversi-Tech Adjustable Ball Mount Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado well be test fitting the self-locking, adjustable, aluminum ball mount, part number dtalbm6600. To begin well go ahead and get our hitch height measurement. This is the measurement from the ground to the inside top edge of our receiver tube. This vehicle has a hitch height of 19 1/4 inches. Now well go ahead and install our ball mount. To install our ball mount well slide the shank of the mount into the receiver tube of our hitch, line up the pin hole and then install our pin and clip.more
Watch Video4/24/2013 10:26:51 AM
Draw-Tite Ball Mounts 40330 Review- Video
Today we are reviewing part number 40330 from Draw Tite. This is a forged one piece ball mount with a one inch rise or a two inch drop. The towing capacity is 16,000 pounds and the towing rate capacity is up to 2,400 pounds. As you can see it has a drop of two inches from the top of the shank to the ball mount platform and it has a rise of one inch from the top of the shank to the ball mount platform. It measures from the center of the hitch pin-hole which is here to the center of the ball hole-which is here and that is eight and one half inches. The ball mount platform itself is one inch tall.more
Watch Video4/22/2013 2:15:54 PM
Hidden Hitch Ball Mounts 80232 Review- Video
Today, we're reviewing Part Number 80232 from Hidden Hitch. This is a Class 3 Ball Mount with a 3-1/4 inch rise or a 2-inch drop and a super extra long shank. The towing capacity rating is 6,000 pounds and the tongue weight is rated at 600 pounds. As you can see the shank is hollow and it is cut at an angle. It makes it a little easier for you to slide this into your receiver. This uses a ball with a 1-inch shank diameter.more
Watch Video4/22/2013 1:16:31 PM
Hidden Hitch Ball Mount with 4 Inch Drop Review - 2013 Ford Escape- Video
Today on our 2013 Ford Escape, well be test fitting the Hidden Hitch ball mount 4-3/4 rise or a 6 drop at 6,000 pounds, part number 80240. To begin our test fit we need to measure our hitch height, this is from the ground to the inside top edge of our receiver tube, we have about 13-1/2. Now well go ahead and install our ball mount, well do this in the drop position first. Well go ahead and take the shank of our ball mount and put it into the receiver tube of our hitch. Well line up the hitch pin hole and then thread in the 5/8 hitch, pin and clip.With the ball mount in the dropped position, we get a measurement of 7 and this is from the ground to the top of the ball platform. Make sure were measuring your trailer height, you so when your trailer is level, measure from the ground to the bottom of the coupler, if your measurement matches ours than this will be a great fit for you.Now we can take our ball mount out, flip it over to the rise position, in this position well get a measurement of 18.more
Watch Video4/22/2013 9:56:32 AM
Andersen Rapid Hitch Ball Mount Review - 2005 GMC Sierra- Video
Today, on our 2005 GMC Sierra, we'll be test fitting our rapid hitch adjustable aluminum ball mount kit with two chrome balls, part number AM3410. Now, to begin our test fit, we'll need to go ahead and get our hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground.Now, on this truck, the measurement is 20-and-a-half inches. Now, keep in mind that the measurement can change due to tire size, hitch style, or any other accessory which may change your vehicle's right height. It's a good idea to measure yours. We'll now go ahead and slide the shank of the ball mount into the hitch, lining up the hitch pinhole, and installing our pin and clip.more
Watch Video4/19/2013 3:16:17 PM
Andersen Rapid Hitch Ball Mount Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500 well be test fitting the Anderson Rapid Hitch Adjustable Aluminum Ball Mount with two chrome balls with a 6 inch rise or a 5 inch drop, part number am3410. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other after-market accessories. Now to begin our test fit well slide the shank of the ball mount in the drop position into the opening on the hitch, line up our pin holes and secure the ball mount with the pin and clip.more
Watch Video4/19/2013 10:36:18 AM
Curt Multi-Ball Adjustable Ball Mount Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500 well be test fitting the Curt Multi-ball Adjustable Ball Mount for 2 inch hitches; Part #D900. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style, or any other aftermarket accessories. To begin our test fit, in the drop position, we will slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure the clip on the other side securing the ball mount to the vehicle.more
Watch Video4/15/2013 9:23:04 AM
Curt Tri-Ball Mount Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500, we'll be test fitting the Curt Tri-Ball Mount for 2" hitches, part number C45001. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20". Now this measurement may vary due to the tire size, hitch style, or any other after-market accessories. To begin our test fit, we'll simply slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and secure the ball mount to the vehicle with the pin and clip.more
Watch Video4/15/2013 9:23:01 AM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500, we'll be test fitting the Convert-A-Ball cushioned ball mount for 2" hitches with a 6-3/4" rise, or 8" drop, rated at 10,000 lbs., part number AMSC8. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20". Now this measurement may vary due to the tire size, hitch style, or any other after-market accessories. To begin our test fit, in the drop position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and secure the ball mount to the vehicle with the pin and clip.more
Watch Video4/15/2013 9:22:58 AM
MaxxTow Tow Strap Loop Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500, well be test fitting the MaxxTow Tow Strap Loop for Two Inch Trailer Hitches rated at 10,000 pounds, part number MT70029. Now before I begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit, well simply insert the tow strap loop into the receiver end of the hitch, lineup our pinholes and secure it with the pin and clip. The pin and clip is sold separately. This MaxxTow Tow Strap Loop is a heavy-duty hitch mounted shackle, which acts as an attachment point for straps, cables or rope.more
Watch Video4/12/2013 12:37:25 PM
MaxxTow Tow Hook Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500, well be test fitting the MaxxTow Tow Hook for Two Inch Hitches rated at 10,000 pounds, part number MT70028. Now before I begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit, well simply slide the shank of the two hook into the opening of the hitch, lineup our pinholes and secure the tow hook to the vehicle with the pin and clip.more
Watch Video4/12/2013 12:37:22 PM
Hidden Hitch Ball Mount with 4 Inch Drop Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500, well be test fitting the Hidden Hitch Ball Mount with a 4 inch rise or 6 inch drop rated at 6,000 pounds, part number 80240. Now before I begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit, well first slide the shank of the ball mount in the draw position into the opening of the hitch, lineup our pinholes and secure the ball mount with the pin and clip. Well now measure from the ground to the top of the ball platform and well get a measurement of about 14 inches.more
Watch Video4/12/2013 12:37:18 PM
Draw-Tite Ball Mount Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500 well be test fitting the Draw-Tite ball mount with a 3/4 inch rise or 2-inch drop rated at 6,000 pounds, part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. Now to begin our test fit in the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure with the clip on the other side.more
Watch Video4/12/2013 12:37:13 PM
Diversi-Tech Adjustable Ball Mount Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500 well be test fitting the Deversi-Tech self-locking adjustable aluminum ball mount with two chrome balls with a six-inch drop or seven-inch rise rated at 10,000 pounds, part number dtalbm6600. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit in the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and turn the key to bring out the self-locking pins.more
Watch Video4/12/2013 12:37:10 PM
Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500 well be test fitting the Convert-a-Ball cushioned weight distribution shank for two-inch hitches rated at 10,000 pounds, part number amac1. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit in the drop position, well simply slide the shank into the opening of the hitch, line up our pin holes, and secure the weight distribution shank with the pin and clip.more
Watch Video4/12/2013 12:37:07 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500, well be test fitting the Convert-A-Ball Cushion Ball mount for two inch hitches with a 3 inch rise or two inch drop rated at 10,000 pounds, part number AMSC2. Now before I begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. This measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit in the draw position, well slide the shank of the ball mount into the opening of the hitch, lineup our pinholes, insert out pin though our pinholes and secure it with the clip on the other side.more
Watch Video4/12/2013 12:37:03 PM
Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500 well be test fitting the Convert-a-Ball cushioned ball mount for 2-inch hitches with an 8 inch rise or 10 inch drop rated at 10,000 pounds, part number amsc10. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 20 inches. Now this measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit well slide the shank of the ball mount in the drop position into the opening of our hitch, line up our pin holes, and secure the ball mount to the vehicle with the pin and clip.more
Watch Video4/12/2013 12:36:59 PM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2005 GMC Sierra- Video
Today on our 2005 GMC Sierra, we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 inch hitches with one inch rise or two inch drop rated at 14,000 pounds, part number AMSC2HD.Now to begin our test fit, we'll need to get our hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now on this truck, that measurement is 20 and a half inches. Now keep in mind, that the measurement can change due to tire size, hitch style, or any other accessory which may change your vehicles right height so its a good idea to measure yours.We'll now slide the ball mount shank into our hitch, line up our hitch pinholes and install our hitch pin and clip.With that, our ball mount is secured to our GMC in the drop position. Now we'll go ahead and measure from the top of the ball mount platform to the ground with this ball mount. That measurement is 18 and a half inches.more
Watch Video4/5/2013 11:00:27 AM
Draw-Tite Ball Mount Review - 2005 GMC Sierra- Video
Speaker 1: Today on our 2005 GMC Sierra, we'll be test fitting the draw tite ball mount with 3 quarter inch rise or 2 inch drop rated at 6,000 pounds, part number 2923. Now to begin our test fit, we'll need to get our hitch hide measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now in this truck, that measurement is 20 and 1/2 inches. Now keep in mind that the measurement can change due to tire size, hitch style or any other accessory which may change your vehicles ride height. So it's a good idea to measure yours. When outside the ball mount into the hitch, line up the hitch pin hole and using our pin and clip, we'll secure our ball mount to our GMC.more
Watch Video4/3/2013 2:54:03 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2005 GMC Sierra- Video
Speaker 1: Today on our 2005 GMC Sierra we'll be test fitting part number AMSC2, the convert-a-ball cushion ball mount for 2 inch hitches, with 3/4 inch rise or 2 inch drop, rated at 10,000 pounds. Now to begin our test fit, we'll need to get our hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now on this truck, that measurement is 20.5 inches. Now keep in mind that the measurement can change due to tire size, hitch style or any other accessory which may change your vehicles ride height. It's a good idea to measure yours. We'll now insert our ball mount into the receiver tube, line up the hitch pin holes and install our hitch pin.more
Watch Video4/3/2013 2:54:00 PM
Diversi-Tech Ball Mounts DTSTBM6425-S2 Review- Video
Today were going to review part number DTSTBM6425-S2. This is the Diversi-Tech Sold Tow Adjustable Aluminum Ball Mount. It comes with the two stainless steel hitch balls. This adjustable ball mount will make it easy for you to hold different trailers. The ball height will adjust in increments of one inch so that you can easily switch between trailers with different tongue heights. The reversible ball platform, you could turn this around either way.more
Watch Video4/1/2013 11:16:51 AM
Hidden Hitch Ball Mount with 4 Inch Drop Review - 2012 Ford F-150- Video
Today on our 2012 Ford F150 we'll be test fitting the Hidden Hitch Ball Mount 4-3/4" rise, or 6" drop, rated at 6,000 pounds, part number 80240. Now before we begin our test fit, we'll first need to obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of 19-1/2". Now to begin our test fit, in the drop position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. We'll then measure from the ground to the top of the ball platform, and we'll get a measurement of 13-1/2". Note that this measurement may vary due to tire size, hitch style, or after-market accessories.more
Watch Video4/1/2013 10:26:58 AM
Diversi-Tech Adjustable Ball Mount Review - 2012 Ford F-150- Video
Today on our 2012 Ford F-150, we'll be test fitting the Diversi-Tech Self-Locking Adjustable Aluminum Ball Mount for 2-inch hitches with a 6-inch drop or 6-inch rise rated at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we'll first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of 19-1/2 inches. This measurement may vary due to tire size, hitch style, or aftermarket accessories. To begin our test fit in the drop position, we'll slide the shank of the ball mount into the opening of the hitch.more
Watch Video4/1/2013 10:26:54 AM
Curt Multi-Ball Adjustable Ball Mount Review - 2012 Ford F-150- Video
Today on our 2012 Ford F150 we'll be test fitting a Curt Multi-Ball Adjustable Ball Mount for 2" hitches, part number D900. Now before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19-1/2". This measurement may vary due to tire size, hitch style, or after-market accessories. Now to begin our test fit, in the rise position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side.more
Watch Video4/1/2013 10:26:47 AM
Andersen Ball Mounts AM3296 Review- Video
Today we are taking to look at the Rapid Hitch EZ Hitch Adjustable Steel Ball Mount Kit, number AM3296. This is an adjustable ball mount with reversible 2 inch and 2-5/16 inch diameter hitch balls. It has a two-sided platform with a 2 inch diameter ball on one side and a 2-5/16 inch diameter ball on the other. The hitch balls secure to the ball housing with the included pin that allows for easy interchangeability and Ill show you how to do that in just a second. The ball mount adjust in 1 inch increments down the side here for a total drop of 8 inches and a total rise of 8 inches as well with just a pull of the pin. It allows you to tow various trailers and keep them level with your vehicle for safer towing.more
Watch Video3/28/2013 12:16:25 PM
Brophy Ball Mounts BM96 Review- Video
Today were going to take a look at the Brophy Class 2 Drawbar, number BM96. This class 2 hitch drawbar fits 1 inch class 2 receiver style hitches and uses a ball with a 3 inch shank diameter. Going to take some measurements here. The measurement from the support gusset to the center of the pinhole is three inches. It has a rise of 5 inches and thats measured from the top of the shank to the top of the ball platform and you can see there 5 inches. It also has a drop of six inches again from the top of the shank to the top of the mounting platform and it has a distance of 7 inches from the center of the pinhole to the center of the ball hole here.more
Watch Video3/27/2013 1:15:51 PM
Convert-A-Ball Ball Mounts AMSC10 Review- Video
Today were going to take a look at the Convert-A-Ball cushion ball mount for two inch hitches part #: AMSC10. This ball mount is cushioned to protect the tow vehicles driveline and hitch assembly as well as the trailers content. The polyurethane cushion acts as a shock absorber reducing the bounce and rhythmic vibration. If functions as a rise, like this, or a drop, to help you level your trailer. It is constructed of powder coated steel, again, with the interior polyurethane cushion. You can see here where the hitch pinhole is, the steel casing that protects that cushion and you can see that right back here as well.more
Watch Video3/27/2013 12:16:10 PM
Diversi-Tech Self-Locking Adjustable Aluminum Multi-Ball Mount Review- Video
Today well be reviewing the Diversi-Tech Self Locking Adjustable Ball Mount part number DTALBM7000. Well start off our review by assembling the two pieces and installing it onto the vehicle. The ball height adjusts from a 10-inch drop to an 11-inch rise with increments of one inch so that you can easily switch between trailers with different tongue heights. The reversible ball platform lets you swap between two chrome balls, a 2-inch ball and a 2-5/6 inches ball are included and preinstalled. The convenient self locking system locks the ball mount to the receiver tube and the ball platform to the ball mount. The lock seals are double sealed to keep water out and resist corrosion.more
Watch Video3/26/2013 11:59:27 AM
Curt Ball Mounts C45900 Review- Video
Today were going to take a look at our Curt Channel Style Adjustable Ball Mount, number C45900. This is a big one when you include the double hitch ball with the shank, youve got about 32 pounds and as you can see here, that is a solid metal shank. Has a built in anti-rattle device which you can see here and Ill show you in just a bit how thats used. It has a powder coat finish for durability. It fits two inch trailer hitch receivers and taking a look at some measurements here, from the mounting edge to the end of the shank is about 12 inches. The height of the mounting edge here is about 9 inch, and the width of the shank is 2 inches.more
Watch Video3/18/2013 2:16:37 PM
Diversi-Tech Ball Mounts DTALBM6600 Review- Video
Today were going to review part number DTALBM6600. This is the Diversi-Tech Self-Locking Adjustable Aluminum Ball Mount. I want to give you a few specs on this first. This is designed to fit into a two-inch trailer hitch receiver. On the ball platform it does have two different size ball diameters. It has a two-and-5/16 and a two-inch that can be used either way.more
Watch Video3/7/2013 1:16:08 PM
Curt Tri-Ball Mount Review - 2012 Honda Odyssey- Video
Today on our 2012 Honda Odyssey well be test fitting the Curt tri ball mount for two inch hitches, part number C45001. Before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. This measurement may vary due to tire size, hitch style or after marker accessories. Well measure from the ground to the inside top of the receiver tube, and well get a measurement of 11 inches. To begin our test fit well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pinholes and secure with the clip on the other side.more
Watch Video2/8/2013 3:45:08 PM
Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2012 Honda Odyssey- Video
Today on our 2012 Honda Odyssey well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with eight and three quarter inch rise, 14 inch drop rated at 10,000 pounds, part number AMSC10. Before we begin our test fit well first need to determine the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We get a measurement of 11 inches. To begin our test fit, in the rise position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through the pin holes and secure the clip on the other side. Well then measure from the ground to the top of the ball platform and well get a measurement of 19 inches.more
Watch Video2/8/2013 9:58:10 AM
Swagman XP Towing Hitch Bike Rack Review- Video
Today well be reviewing the Swagman XP folding three bike towing rack for two inch hitches, part number S64955. To begin our review with our bike carrier already assembled well first begin with the installation. Normally well load the bike on the cradles closest to the vehicle, but for todays demonstration purposes we will be loading the bike on the end cradles so you can see the function of the bike rack. In order to use this bike carrier you will need a ball mount with an extended shank that is a minimum of 10 inches from the hitch pin hole to the ball mount platform. With that being said well use part number 80233 to begin our installation. Well slide the ball mount through the bottom end of the carrier and slide the shank of the ball mount into our hitch.more
Watch Video2/8/2013 8:55:10 AM
Hidden Hitch Extra-Long Ball Mount Review- Video
Today we'll be reviewing Hidden Hitch's extra, extra long ball mount with a 2 inch rise or 4 inch drop, rated at 6,000 pounds, part number 80233. This ball mount fits 2 inch by 2 inch trailer hitch receivers and uses a ball with a 1 inch shank diameter. It measures 10 inches from the center of the hitch pinhole to the closest part of the weld in the ball mount platform. The ball mount is rated up to 6,000 pounds gross trailer weight and up to 600 pounds tongue weight. The extra, extra long shank of the ball mount is designed for vehicles who's hitches are way back behind the bumper. It can also be used for vehicles which have a spare tire mounted onto the car (hood) door, and also for bike carriers that allow you to tow trailers and and carry a bike at the same time.more
Watch Video2/1/2013 10:31:54 AM
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2012 Jeep Liberty- Video
Today our 2012 Jeep Liberty, well be test fitting the Convert-A-Ball dual-cushioned adjustable ball mount part number CAB-UM.Now before installing our ball mount, well first need to get our hitch height measurement. This is the measurement from the inside top edge of the receiver tube to the ground. Now on our vehicle, that measurement is 20 inches. Now keep in mind that measure can change due to tire size, hitch style or any other accessory that may change your vehicles right height. Its a good idea to measure yours.Well now slide the shank of the bar mount into the hitch, line up the hitch pinhole and install our hitch pin and clip. This will secure the ball mount to the vehicle in the drop position.more
Watch Video1/29/2013 8:42:08 AM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Jeep Liberty- Video
Today on our 2012 Jeep Liberty, well be test fitting the Convert-A-Ball cushion ball for 2-inch hitches with -inch rise and 2-inch drop weighted at 10,000 lbs part number AMSC2.Now before we begin our test fit, well need to get our hitch height measurement. This is the measurement from the inside top edge of the receiver tube to the ground. Now on our vehicle, that measurement is 20 inches. Now keep in mind that measure can change due to tire size, hitch style or any other accessory that may change your vehicles right height. Its a good idea to measure yours.Well now slide the draw bar into the hitch, line up the hitch pinhole and install our pin and clip. This will secure the ball mount to the vehicle in the drop position.more
Watch Video1/29/2013 8:42:05 AM
Andersen Rapid Hitch Ball Mount Review - 2006 Cadillac Escalade- Video
Today on our 2006 Cadillac Escalade, we'll be test-fitting the rapid hitch adjustable aluminum ball mount kit with two chrome balls, part number AM 3410. Now before installing our new rapid hitch adjustable ball mount, we'll first need to get our hitch height measurement. To do this, we'll measure from the top of the receiver tube opening to the ground. Now, in this truck, that measurement is 15 1/4 inches. Now keep in mind that this measurement can change do you to tire size, hitch style, or any other accessory that may change your vehicle's right height, so it's a good idea to measure yours. We'll now slide our ball mount into the hitch, line up the hitch pinhole, and install our hitch pin.more
Watch Video1/29/2013 8:40:34 AM
Draw-Tite Ball Mount Review - 2012 Jeep Liberty- Video
Today on our 2012 Jeep Liberty, we'll be test fitting the Draw-Tite Ball Mount with 3/4-inch Rise or 2-inch Drop rated at 6000 lbs., part number 292. Now to begin our test fit, we'll first need to get our hitch height measurement. This is the measurement from the inside top edge of the receiver tube to the ground. Now in our vehicle, that measurement is 20 inches. Now, keep in mind: That measurement can change due to tire size, hitch style, or any other accessory that may change your vehicle's ride height so it's a good idea to measure yours. We'll now take the drawbar.more
Watch Video1/28/2013 7:48:22 AM
Curt Tri-Ball Mount Review - 2012 Jeep Liberty- Video
Today on our 2012 Jeep Liberty, we'll be test fitting the Curt Tri Ball Mount with Hollow 2-inch Shank, part number C45001. Now to begin our test fit, we'll first need to get our hitch height measurement. This is the measurement from the inside top edge of the receiver tube to the ground. Now in our vehicle, that measurement is 20 inches. Now, keep in mind. That measurement can change due to tire change, hitch style, or any other accessory that may change your vehicle's ride height so it's a good idea to measure yours.more
Watch Video1/28/2013 7:48:19 AM
Hidden Hitch Ball Mount with 4 Inch Drop Review - 2006 Cadillac Escalade- Video
Today on our 2006 Cadillac Escalade well be test fitting the Hidden Hitch ball mount with four and three quarter inch rise or six inch drop, rated at 6,000 pounds, part number 80240. To begin our test fit well first need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 15 inches. Keep in mind that this measurement can change due to tire size, hitch style or any other accessory that may change your vehicles ride height, so its a good idea to measure yours. Well now slide our draw bar into the hitch, lining up the hitch pin holes where we can then install our hitch pin.more
Watch Video1/25/2013 1:57:46 PM
Draw-Tite Ball Mount Review - 2006 Cadillac Escalade- Video
Today on our 2006 Cadillac Escalade well be test fitting the Draw Tite ball mount with three quarter inch rise or two inch drop, rated at 6,000 pounds, part number 2923. Before we install our ball mount well need to measure our hitch height measurement. To do this, well measure from the top of the receiver tube opening to the ground. On this truck, that measurement is 15 inches. Keep in mind that this measurement can change due to tire size, hitch style or any other accessory that may change your vehicles ride height, so its a good idea to measure yours. Well now slide the shank of the ball mount into the hitch, line up the hitch pin hole, and install our hitch pin.more
Watch Video1/25/2013 1:57:41 PM
Convert-A-Ball Pintle Mounting Bar Review - 2006 Cadillac Escalade- Video
Watch Video1/25/2013 1:57:33 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2006 Cadillac Escalade- Video
Watch Video1/25/2013 11:02:42 AM
Draw-Tite Ball Mount Review - 2013 Ford Escape- Video
Today on our 2013 Ford Escape well be test fitting the Draw Tite ball mount with three quarter inch rise or two inch drop, rated at 6,000 pounds, part number 2923. Before fitting our ball mount to the vehicle well need to get our hitch height measurement. To do this well measure from the inside top edge of the hitch receiver tube to the ground. On this vehicle, that measurement is 14 inches. Keep in mind that measurement can change due to hitch style, tire size or any other accessory that may change your vehicles ride height, so its a good idea to measure yours. Well now go ahead and slide the ball mount shank into the hitch, line up the hitch pin hole and install a hitch pin and clip.more
Watch Video1/23/2013 7:58:58 AM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Ford Escape- Video
Today on our 2013 Ford Escape well be test fitting the cushioned ball mount for two inch hitches with three quarter rise or two inch drop from Convert-A-Ball. This is part number AMSC2. Before fitting our ball mount to the vehicle well first need to get our hitch height measurement. To do this well measure from the inside top edge of the hitch receiver tube to the ground. On this vehicle, that measurement is 14 inches. Keep in mind that measurement can change due to hitch style, tire size or any other accessory that may change your vehicles ride height, so its a good idea to measure yours.more
Watch Video1/23/2013 7:58:54 AM
