customer service | view cart 
Wiring Harness Installation - 2006 Toyota Highlander
Custom Fit Vehicle Wiring
This Product Fits The Following Vehicles
2008 - 2008 Toyota FJ Cruiser
2004 - 2005 Toyota Highlander
2006 - 2007 Toyota Highlander All Models, except Hybrid
2006 - 2007 Toyota Highlander Hybrid Models
Products Featured in this Video
Tow Package Wiring Harness with 4 Pole Trailer Connector - Toyota Highlander
118248
$29.95
Manufacturer Instructions
Installation of a Wiring Harness on a 2006 Toyota Highlander
Today we are going to do an install of part number 118248 the T One connector from Tow Ready. It will be installed on our 2006 Toyota Highlander. To get to our access point which is about down here and underneath this panel. So we will have to roll back the carpeting and pull up the tray and gain access that way. Once you get everything out of the way it is pretty clear that this is the plug right here for the harness. So our T connector can plug right into here. Then our ground wire will actually mount to this ground bolt right here. We took our ground bolt out and we will simply install our ground wire here and run it back through there and install it. Next we will install the module box itself using the self adhesive tape that is on the backside of the connector.
We will hide it back in here in this cavity. Then we can string out our cable here and it is actually stored inside when it is not being used. The last thing we will have to do is install a fuse for our tow package. To install our fuse we will have to get underneath the hood to get to the fuse box here. Which is in this location right here where you will simply install the fuse. Back to the rear of the vehicle we are going to go ahead and zip tie all the loose wires in here into a wire bundle so we can keep everything nice and neat. Now we will go ahead and reinstall the interior. While we are reinstalling our interior there looks to be a little notch here. That is where we are going to push the wire into.
We will bring the leftover into the tray so it can be stored there. That is the install but now I am going to show you how to use it. You have to get back inside and pull your cover up and pull out the harness and leave it out by your hitch. Go ahead and shut the door on it because the door has plenty of wiggle room to make it work. That covers our install of part number 118248 the T One connector from Tow Ready. Installed on a 2006 Toyota Highlander.
Questions About Part 118248
Routing 4-way Connector To The Outside on a 2005 Toyota Highlander
Wiring Harness for a 2003 Toyota Highlander
Will Wiring Harness Part # 118248 Fit a 2007 Toyota Highlander without a Tow Package
Vehicle Wiring for a Highlander Hybrid With and Without Factory Installed Tow Package
Filter Videos
- Search By Other Makes
- Acura (2)
- Buick (2)
- Chevrolet (21)
- Chrysler (7)
- Dodge (16)
- Ford (14)
- GMC (5)
- Honda (10)
- Hyundai (5)
- Isuzu (1)
- Jeep (12)
- Kia (8)
- Lexus (1)
- Mazda (1)
- Mitsubishi (2)
- Nissan (8)
- Oldsmobile (1)
- Pontiac (3)
- Saturn (3)
- Subaru (3)
- Suzuki (1)
- Toyota (10)
- Volkswagen (2)
- Volvo (2)
- Wiring Help
Dielectric Grease Review- Trailer Wiring Diagrams
5 Wire vs 4 Wire System Demonstration- Circuit Testing for Vehicle Wiring
- Testing for a Correct Ground Connection Demonstration
- T-One Wiring Harness Explanation
- Trailer Wiring Harnesses Troubleshooting
- Testing and Troubleshooting a Modulite Vehicle Wiring Harness
Search
Contact and Help
What our customers said:
Thank you! I enjoyed shopping your site.
Jamie
Mechanicsville, VA
