
customer service | view cart

Custom Fit Vehicle Wiring
This Product Fits The Following Vehicles
2005 - 2010 Honda Odyssey
T-One Vehicle Wiring Harness with 4 Pole Trailer Connector - Honda Odyssey
118438
$39.95
Step one would be to get to the wiring itself, thats going to require removing a couple of panels and loosening a couple. First thing to do is take out the trunk tray, the threshold and loosen the two side panels. Taking off that panel will allow us to get this panel loose here to get to the junction box inside. Wiring harness installation: Now that we have our panel is loosened you can see the junction box. It will use this port here and simply plug in. Once youve plugged it in, go ahead and ground it. Theres a handy ground screw right here well just use that. Last step is to mount the box here and well just stick it behind this harness here, it has self adhesive.
Next we need to run the four flat wires all the way along the original harness and then well go inside here and install it into the jack compartment. Next well push the wire through here and pull it out through here, so we can store it there. All that remains now is put the panels back together and test the connections.
One final step is to put the fuse in the fuse holder right here for the accessories. Its marked in the instructions, its kind of hard to see but well go ahead and show you the best we can. Its usually the last open slot and then well test it.
The last step is to check our wire harness. First well try the running lights, then the turn signals and the brake lights. Once your finished, fold up the cable and hide it in the jack compartment. When it is needed simply take it out of the storage compartment, pull it out, and shut the door on it and it will be fine.
Questions About Part 118438
Installing the Fuse From T-One Harness Part # 118438 on a 2008 Honda Odyssey EX