Today on this 2012 Buick Enclave were going to be test fitting the WeatherTech Liner for the Cargo Area, part number WT40424. This liner is designed to cover up not only the cargo area but the 3rd row seats as well. It will cover all the way from the 2nd row seats back. Its custom molded to fit the contours of our Enclave and protect the carpet. It has a tray edge around the perimeter that will help contain dirt and debris and keep it off your carpet. When the liner gets dirty it can simply be removed and washed with soap and water.
Once dry it can be returned to the vehicle and it will continue protecting your carpet. And that does it for our test fit of the WeatherTech Liner for the Cargo Area of the 2012 Buick Enclave, part number WT40424. Its also available in tan, part number WT41424, as well as gray, part number WT42424.
Today, on a 2013 Buick Enclave, we're going to install part number HL71021 from Husky Liners. This is Husky Liner's classic custom auto floor liner for a third row in black. To start off, I'm going to go ahead and remove the existing floor mat in the floor. We want to get down to bare carpet. Then we can go ahead and lay the new Husky Liner into place. Just fold it up as needed to work it in between the seats, then lay it down. After it's in place, we can see it has ridge all the way around the edges.
Today, on our 2013 Buick Enclave, we'll be doing a test fit of the U Ace 3D Kagu Custom Auto Floor Liners with MAXpider Grips for the front in black color, part number L1BC00811509. These floor liners are also available in beige, part number L1BC00811502. Additionally, they are also available in a gray color, part number L1BC00811501. Before we can install our new 3D KaguCustom Auto Floor Liners we need to remove the any existing or factory mats that may already be in place. We'll start here, on the driver's side. You simply turn the locking tab that holds the factory mat in place, lift off, and set aside.
Today on our 2010 Buick Enclave well be test fitting the Husky floor liner in the second row, part number HL61021, black in color. Before we test fit the Husky floor liner well remove the old or manufactured floor mat. Husky floor liners are custom molded precisely fit the vehicle and stay in place. The shape, channels and moldings all work to keep dirt and debris contained in the liner and off the carpeting. As you can see this is a one piece liner. It extends all the way from the driver to the passenger side threshold.
Today on our 2010 Buick Enclave well be installing the Husky Floor Liner in the front row part number HL31011 black in color. First well go ahead and remove the old or manufacturer floor mats and now were ready to install the Husky Liner Floor Liner. The Husky Floor Liners are custom molded to precisely fit the vehicle and stay in place. The shape, channels and moldings all work to keep dirt and debris contained in the liner and off of the carpeting. As you can see here its custom molded to fit over the manufacturers attachment point, it has a raised outer edges and is custom molded to fit the manufacturers floor board and around the threshold here on the drivers side. Additionally, its custom molded to fit around the drivers side foot rest and has an extended front edge up underneath the dashboard for full coverage up underneath the gas and brake pedal.
Today, on our 2009 Buick Enclave, well be installing the Husky Liner Classic Custom Cargo Liner in black, part number HL21061. This liner also comes in grey, part number HL21062. In tan, part number HL21063. Now to begin the installation well need to remove the factory or old cargo mat from the vehicle, if equipped. We can now simply place our Husky Liner Cargo Liner into our cargo area, allowing it to conform to the floor of the Enclave. Youll notice this custom molded floor liner fits into your Buick Enclave trunk or cargo area perfectly.
Today on our 2009 Buick Enclave, we'll be test-fitting part number WT442511. Thisis the WeatherTech Front Auto FloorLiners, in black. These liners are also available ingrey, part number WT462511, and tan, part number WT452511. To begin our install, we'll simply remove the factory or old floor mats from thevehicle, if equipped. With the old floor mats removed, we're now ready to install ournew WeatherTech FloorLiners. The WeatherTech FloorLiners are custom molded,to ensure a perfect fit for each Buick Enclave.