Today on this 2011 Ford f150, were going to be installing the weather tech floor liners for the front seat part number wr443341 black in color. Weve already removed the factory floor mats, as you can see here on the driver side, the custom molded floor liner fits perfectly over the factory anchors. For this application theres a 2 piece mat to install on both the driver and passenger side. Because the weather tech liners are molded to fit the shape of the vehicles floor, theyre not going to slide and move around like a typical floor mat will. Another great feature of the weather tech floor liner is that theyre easily to remove and to be cleaned unlike a carpeted floor mat that needs to be shampooed when it gets soiled, the weather tech liners can easily be removed from the vehicle and hosed off.The channels or moldings will also help keep fluid towards the center of the mat and away from the edges. And there you have it for our weather tech floor liner part number wt443341.
This application also comes in tan wt453341 or grey part number wt463341. And there you have it for our weather tech floor liners on our 2011 Ford f150 super crew cab.
Today, on our 2008 Ford F150, we'll be test fitting the Husky Liners Classic auto floor liner for the front and center hump, in black, part number HL83651, also available in gray, part number HL83652, and tan part number HL83653. These Husky Liners protect the carpeted center inaudible 00:00:21 your vehicles interior from spilled messes with this custom-fit, rubberized, thermoplastic material. They won't crack or break and maintains the shape for superior coverage.The mats withstand most hazardous chemicals such as oil, gas, and battery acid. They have specifically designed threads that help channel fluids, dirt, and debris. The black finish compliments most interiors. They're made in the USA and they come with a lifetime limited warranty.
Today on this 2012 Ford F150 were going to do a test fit of part number HL83421. This is Husky Liners Classic Custom Auto Floor Liner for a front center hump. Were going to start off our test fit by removing any existing floor coverings. Then well go ahead and put this directly on top of the carpet. Were actually going to take it and fold it in half part of the way so it makes installation just a little bit easier. Well tuck in one edge towards the center console and push the other edge towards the dash, and well go ahead and push it into place.
Today on this 2012 Ford F150 were going to do a test fit of part number HL51231 from Husky Liners. This is their front floor mats and this is their semi-custom fit. Well start off our test fit by removing any existing floor mats or liners, and well go ahead and lay the new mats into place. Starting on the passenger side, well go ahead and lay it down and you can see it has a really good fit as is. Now, theres cutout lines for different interiors, but in this case it looks like just removing the shipping tab will work just fine. You can see it has an edge that goes all the way around to trap the water and mud and also goes part way up the floorboard.
Today on our 2006 Ford F150, well be test fitting the Husky Liners Classic Custom Auto Floor Liner for the front center hump, in black, part number HL83651. Now to begin our test fit, well simply place the mat onto the center hump of our vehicle. These floor liners are custom-molded to fit over the front center hump of the vehicle. Its made of a rubberized thermoplastic material and it wont crack or break. It withstands most hazardous chemicals such as oil, gas, and battery acid and is specially designed to help channel fluids, dirt, and debris. The nibs on the underside of the mat help keep the floor mat in place.
Today on our 2006 Ford F150, well be test fitting the Bully Custom Truck Floor Liners part number FM-314. Now before we begin our test fit, we will first need to remove the factory of previously installed floor mats on our vehicle. Once we have removed the floor mats, were ready to install our new Bully Floor Liners. Well start with the drivers side of the vehicle and set the floor liner onto the vehicle. You can notice that on the bully floor mat there is a spot for the manufacturers hook. Well then move to the passengers side and well repeat the same process.
Today on our 2013 Ford F150 well be test fitting the WeatherTech Front Auto Floor mats in gray part number WT461791. These floor mats are custom molded to ensure a perfect fit for your vehicle. The unique material is designed for strength and features a texture that securely grips the floor. Advanced surfacing creates channels that divert fluid and debris away from shoes and clothing and prevent leaking over and damaging your carpet. These floor mats are made in the USA. Now that weve gone over some of the features of the floor mat well go ahead and show you how to install them.