Today on this 2011 Chevrolet Tahoe, were going to be test fitting the WeatherTech Cargo Liner, part number WT40307. This liner is black in color. However, its also available in tan, part number WT41307, as well as gray, part number WT42307. The WeatherTech liner is custom fit to your vehicle. Its designed to cover the entire cargo area and fit the contours of the interior. Theres a lip all the way around the cargo liner thats going to help keep debris on the mat.
Over time, when the liner gets dirty, it can easily be removed from the vehicle, wash with soap and water, and then once dry you can return it to the vehicle where it will continue to provide years of protection. There are a pair of pre-formed cutouts in the liner that if you need to, you can cut them out to have access to the tied down rings that are in the cargo area of the vehicle. That does it for our test fit of the WeatherTech Cargo Liner, part number WT40307, on our 2011 Chevrolet Tahoe.
Today well be test fitting the Weathertech Cargo Liner in tan, part number WT41306 on our 2013 Chevy Tahoe. This mat is also available in gray, part number WT42306 and black part number WT40306.Before we begin our test fit, we will first need to remove the third row of seats. To do this, well start off by first folding down the back rests of the seat. After laying down the back rests of the seat, well simply pull out on the handle. Well do this for both the passenger and driver side seats of the third row.Well now place the new Weathertech Cargo Liner into the cargo area of the vehicle. You can notice that the mat is custom molded to allow for complete coverage of your trunk or cargo area.
Today on our 2013 Chevy Tahoe well be test fitting the Weathertech front auto floor mats in tan, part number WT450661. To begin our test fit we will first need to remove the factory, or previously installed floor mats. We will do this for both the front drivers side and passengers side of the vehicle. Were now ready to install our new Weathertech floor mats. We will simply place the floor mat in to where the existing mat was. We will repeat this step for the other side.
Today on this 2011 Chevrolet Tahoe were going to do a test fit of part number WT42306 Weathertech. This is their floor liner for the cargo area. Today well be working with the grey color. This is also available as tan, as part number WT41306 and black as part number WT40306. This cargo liner is designed for vehicles that have three rows of seats with the second row as bucket seats. A couple of things to know about this cargo liner, that the shape, the channels and moldings are all designed to help keep dirt and debris contained in the liner and not in your carpet.
Today in this 2011 Chevrolet Tahoe we are going to be test fitting the WeatherTech digital fit floor liners part number WT440661. Theses floor liners are black but they are also available in gray part number WT460661 as well tan part number WT450661. The first thing we need to remove is remove the OEM or preexisting floor mats from the vehicle. Once weve had those out of the way we are ready to drop in our WeatherTech liners. The WeatherTech liners are custom fit to the vehicles floorboard. Theyll fit the contours around the foot box and the transmission tunnel and theres even a place for the factory floor mat hook that the WeatherTech will use.
Today on this 2011, Chevrolet Tahoe we are going to test fitting the husky liner custom fit plastic floor mats part number HL31413. These are tanned but the liners are also available in gray part number HL31412 as well as black, part number HL31411. The first thing we need to do is remove the factory or preinstalled floor mats so that we can drop our husky liners in place. Its molded to fit around the contours of the foot box, the floor board even the transmission tunnel. On the underside are the stapled nibs that will help to hold the floor line in place. Theres lip around the floor liner that will make sure that all dirt and debris stays in the liner and off, of your carpet.