Today on our 2011 Ford Escape, were gonna be test fitting the WeatherTech second row floor liner part number WT441192. This liner is also available in tan, part number WT451192 and as well as gray, part number WT461192. Before were ready to drop in our liner, we to remove the factory or previously installed floor mats. Once theyre out of the way, we can drop in our WeatherTech Liner. The WeatherTech liner is custom molded to fit our vehicle. Its contoured to fit around our seat mounts for the front seats as well as the center console.
It also fits around our seat buckle mounts down the floor board. The channels and moldings in the surface of our liner help work to keep debris and dirt trapped in the liner and off your vehicles carpet. When the liner gets dirty, you can simply remove it from the vehicle, wash it with soap and water and once dry, you can return it for years of carpet protection. That does it for our test fit of the WeatherTech second row liner for our 2011 Ford Escape part number WT441192.
Today, well be test fitting the Husky Liners WeatherBeater Custom Auto Floor Liners, part number HL99743, on our 2013 Ford Escape. The specific liners we'll be testing today are in color tan. These liners are also available in black with the part number HL99741. To begin our view, we'll go ahead and remove the old mats in the second row. Now, we'll take our Husky liner and put it in the second row. As you can see, the second row liner is one piece.
Today on our 2013 Ford Escape, we'll be test fitting Husky Liners WeatherBeater Custom Auto Floor Liners for the front and rear, part number HL99741. The floor mat is also available on tan, part number HL99743. Now before we begin, we'll first need to remove the factory or previously installed floor mats. To do this, we'll simply pull out the floor mat and replace it with the new Husky Liners WeatherBeater. We'll start with the driver's side for this installation. We'll place the floor mat onto where the existing floor mat was.
Today on our 2002 Ford Escape, well be installing the Husky Liner Classic Custom Cargo Liner, part number HL23152 grey in color. First step of our install, well first go ahead and open up the rear cargo door and sit it into place. As you can see Husky Cargo Liners are custom molded precisely to fit the vehicle and stay in place. The shape, channels and moldings all work to keep dirt and debris contained in the liner and off of the carpeting. With its raised outer edge and custom molding to the floorboard and interior trim panels, it provides complete coverage from side-to-side and from threshold to second row seating. One more great feature about the Husky Cargo Liner is its easy to install and can also be easily removed and cleaned and washed with soap and water.
Today we arere going to do a test for the part number HL23223 Husky Liner. This is our floor liner for the cargo area on our 2009 Ford Escape. Today we are working with the tan color. This is available in black as part number HL23221 and gray as part number HL23222. We are going to start out with the factory mat removed from the vehicle. We will go ahead and lay the new liner in place.
Today on this 2012 Ford Escape, were going to do a test fit of part number HL23141 from Husky Liners. This is our floor liner for the rear cargo area. Well be working with the black color today and this is also available as grey as part number HL23142 and tan as part number HL23143. Now well go ahead with our test fit and lay it into the cargo area and you can see how it meets up against the edge of the backseat and it also follows the contour of the wall panels on the inside. A couple of things to know about this floor liner is, its designed to match the interior of the vehicle, the shape, the channels and moldings all help to keep dirt and debris contained in the liner and not in your carpet and it can easily be removed and cleaned with just soap and water. With that, thatll finish it for our test fit of part number HL23141 from Husky Liners on our 2012 Ford Escape.