Today we are going to do a quick over view of the Tracrac G2 Slider Rack on a 2005 Ford F150. It is part number ta21000-02. The Tracrac G2 uses a set of base rails that attach to the top of the bed rails on your truck. On top of the base rails we have our uprights and crossbars that attach to the base rails and slide along. To slide the Tracrac and reposition it, all we have to do is loosen the hand knob, and the uprights and crossbar slide right along our rails. That we can set it at whatever spread we need to for whatever ladders or material we are hauling.
Once you have your position, all you have to do is tighten down the hand knob and youre ready to go. On each of the four uprights you will find this large tie down cleat. You will find theres enough space to hook in ratchet straps, or you could tie rope to help you secure whatever load you are carrying. On top of the load bars is a slotted track system that runs the entire length. Included with the G2 is a set of load stops.
Molded into the load stop is a tie down loop that you could use with rope or ratchet straps again to help secure whatever load you got on top of the rack system. Again you will loosen the hand knob and you can slide the load stop anywhere along the load bar to help you secure your cargo, and then you will tighten it down with a hand knob. One of the best features of the Tracrac systems are all the accessories that are available to help you further utilize your system. There are plenty of attachments that will go inside the base rail or up in the slots on top to help you secure loads. Theres load stops, anchor points, even ratchet straps that are designed to specifically fit the Tracrac systems.
And that is it for our Tracrac G2 Slider overview, part number ta2100-02.
