Today we're going to be taking a look at the Erickson Heavy Duty Bull Ring Retractable Anchor Point rated at 1,000 pounds in a two pack, part number EM4001. The bull rings provide accessible points for ratchet straps, bungee cords, and cargo netting. The retractable design lets you easily snap the ring up or down. No drilling is required for this installation. Please check the measurements of your anchor against your truck to ensure a proper fit. To install the anchor points we'll first need to remove these two silver screws. Now there are two levers here which we'll need to insert one of the levers into one side of the stake pocket hole first. Now with the first tab under the pocket, we'll go ahead and tilt downward, then scoot it over, allowing the second tab to fall into place.
We'll now go ahead and lift the silver U-bolt up, pulling the two silver screws. We'll then use the Phillips head screwdriver to tighten down the screws. Now what this is going to do is this is going to bring that bottom piece up on the underside of the rails of our bed and it's going to pinch the two pieces together, securing them in place. As you can see, it's really sturdy. We can then move to the other side of the vehicle and repeat the same process. Now that we've gone over some of the special features of the Erickson Heavy Duty Bull Ring, and shown you how to install it, we'll go ahead and load up some gear and take a test drive down the road to show you how they perform. That'll complete today's review of the Erickson Heavy Duty Bull Ring Retractable Anchor Points, part number Em4001. .