Today well be reviewing part number CZ01101105. This is the Croozer Infant Reclining seat for both the Croozer Kid One and Two child carriers. Its designed for children ages 1 to 10 months old and will help support your baby in a reclining position as well as protect them from jarring and bumping. The padded seat will attach securely to your carriers from. This is not recommended for use with the bike trailer attachment. Now well move on to installing the seat.
Well first remove the padded harness already installed in the carrier. Next well take the infant sling which already has a built in harness and the two upper connections will lock into the frame. Theyll go up and through and then hook into place on each side. Next youll see two sets of slots in the sling which set you use is dependent on the size of your child. You run the shoulder straps from the carrier through the proper set of slots.
For this application were going to use the top slots. These will connect to the padded harness in the sling. The three remaining attachment points on the carrier will connect with the three remaining on the bottom of the sling tightening them up as needed. All that remains now are the two bottom buckles with straps that will wrap around the bottom frame of the carrier. Well guide the straps underneath the bottom frame and out through the buckle again tightening down as necessary.
That finishes it for part number CZ01101105 the Croozer Infant Reclining seat.