Today were going to show Chariots Infant Sling for the Child Transport Systems, part number CH20100744. The first thing we need to do is remove this Philips head screw from the frame. You can see the preinstalled nut on the top side of the frame, and you will need to remove the screw from the bottom side. Well do this on both sides of the carrier. Well take our anchor bar and we will replace the screws with the anchor bar in between. Position the anchor bar and feed the screw through the anchor bar and feed the screw through the anchor bar into the preinstalled nut.
Take your Philips and screwdriver and tighten it down. With the anchor bar in place, were ready to install the sling. Well take the sling and make sure we have it oriented the proper position, the Chariot tag should be on the top. Well take our strap, feed it through the frame inside the cover. You may find it is easier to feed the strap through if you partially clasp the carrier.
Now well attach the lower end of the sling. Well take these straps and wrap them around our anchor bar and secure them. Since we have our sling positioned in the center, were going to need to take the lap belt from the far right and attach it to the back of our sling, and then well take the lap belt strap from the far left and attach it to the other side of the back of our sling. Next well take the shoulder harness, feed the strips through the slots cutting back at the swing and reconnect them to the shoulder harness buckles in the back. Lastly, well take the crotch strap, feed it up through the bottom of the sling and through this loop, and back to the shoulder harness.
The between swing is designed to be used with babies one month to ten months old. And thats it for Chariots Infant Swing for their Child Transport Systems, part number CH20100744.
