Start by entering the trunk and you want to remove the access panels that allow you access to the rear of the taillights there is one on each side, there are three fasteners holding it on. Once you remove the interior panels pull your carpet back and you need to remove the metal threshold piece as well. There are two fasteners attaching it, and it is just pop riveted on.
Next locate the factory T connector behind each tail light assembly, you have to remove those, and plug the T-One harness in-line. The yellow will go to the driver side and the one with the green wire will go to the passenger side. After you connected the T-connectors into the vehicle, you are going to need to mount the ground screw. You need to find a suitable mounting point somewhere on the body metal of the vehicle. I am going to mount it right here.
Use the provided self tapping screw with the kit. After I drilled the hole, I am going to mount the ground wire. Once you finish mounting the ground screw and connecting the connectors, just put the trunk compartment back together. Here is your finished product it is just going to hang out of the trunk in use.
Do you have a question about this product?
With thousands of product installations and troubleshoots, we don't just sell this stuff, we know how to install and use it.
Please include the year, make, and model of your vehicle, being as specific as possible, if you have a question about a custom fit product.
Subject:
Name:
Contact email:
How can our experts help?
