Today on our 2012 Buick Enclave we will be test fitting the Yakima Swingdaddy4 bike bike rack part no. Y02422. We will begin our test fit by inserting the bike rack shank into the hitch. We will line up the hitch pin hole and insert and tighten down our anti-retal bolt. We will then give you a few measurements. We have 20 inches of ground clearance with this bike rack and it is 3 inches from the closest point of the bike rack to the back of the vehicle.
We will now go ahead and swing the arm out to open our cargo door and as you can see we can gain full cargo access with this bike rack. We will now go ahead and open up the arms on the bike rack to load a bike. With the arms open we will undo the wheel loop straps to expose the cradles, we will set our bike into the cradles and bring the straps around securing it to our bike rack. And in those few easy steps our bike is loaded. Well another great feature of the swingdaddy is that you do have the ability to open up the bike rack to gain access to gain access to your cargo area with the bike on the bike rack itself.
We will go ahead and demonstrate that now. And there you have it for part no. Y02422 the Yakima swingdaddy4 bike for 2 inch hitches on our 2012 Buick Enclave.
Thule Vertex 4 Hitch Bike Rack Review - 2010 Buick Enclave
Today on our 2010 Buick Enclave well be test fitting the Thule vertex four bike carrier, part number TH9029. To begin out test fit well slide the shank of the carrier into the opening of the hitch tube, line up our pin hole, thread our anti-rattle bolt through the threaded pin hole and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and the vehicle fit together. There is about 16 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 1 inches. Weve added about 11 inches to the overall length of the vehicle.
Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2010 Buick Enclave
Today on our 2010 Buick Enclave well be test fitting the Swagman XTC two bike carrier, part number S64670. To begin our test fit well slide the shank of the carrier into the opening of the hitch tube, line up our threaded pin holes, thread our anti-rattle bolt through the threaded pin holes and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. Theres about 17 1/2 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 4 inch. Weve added about 20 1/2 inches to the overall length of the vehicle.
Swagman Titan Hitch Bike Rack Review - 2010 Buick Enclave
Today on our 2010 Buick Enclave well be test fitting the Swagman titan four bike carrier, part number S63410. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our threaded pin holes, thread our anti-rattle bolt through the threaded pin holes and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. Theres about 17 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 7 inch. Weve added about 20 inches to the overall length of the vehicle.
SportRack EZ Hitch Bike Rack Review - 2010 Buick Enclave
Today on our 2010 Buick Enclave well be test fitting the Sportrack two bike carrier, part number A30901. To begin out test fit well slide the shank of the carrier into the opening of the hitch tube, align up our threaded pin holes, thread our anti-rattle bolt through the threaded pin holes and tighten with a wrench. Now lets go over some clearance measurements to see how the bike carrier and this vehicle fit together. Theres about 17 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 8 inch. Weve added about 25 inches to the overall length of the vehicle.
