Today on our 2006 Jeep Liberty, we'll be test fitting the Yakima SpareTime 2 Bike Carrier, part number Y02598. Now, we've already gone ahead and removed our spare tire and we've also removed the center cap out of the spare wheel. We can now place our adapter plate onto the spare tire mount and reinstall our spare tire. With our spare tire tight, we're now ready to load our bike rack. We'll place the bike rack into the wheel mount adapter and tighten it down using the red knob. That will secure our bike rack to the vehicle.
We'll now go ahead and bring out our dual arm where we'll undo the straps exposing our cradles. We can place the bike into the cradles and bring the straps around, securing it to the bike rack. And there you have it, our bike is loaded and we're ready to head on down the road. And that completes our test fit of the Yakima SpareTime 2 Bike Carrier, part number Y02598 on our 2006 Jeep Liberty.
Thule Passage Trunk Mounted Bike Rack Review - 2012 Jeep Liberty
Today on our 2012 Jeep Liberty well be test fitting the Thule Passage two bike carrier part #: TH910XT. To begin our test fit well place the bike rack up against our cargo door and adjust it as necessary. The fit guide for this vehicle does say to set the fit dial to 11. With that done well go ahead and place the bike rack against the door and bring the two top straps up and hook them to the cargo door just behind the roof here on the roof line. Well then take the remaining four straps and hook one side of the strap to the side of the cargo door, here just above the taillight, and the other side to the cargo door just above the rear bumper fascia. Well then move around the bike rack, tightening up the straps, securing our bike rack to the vehicle.
Hollywood Racks Expedition Trunk Bike Rack Review - 2012 Jeep Liberty
Today, on our 2012 Jeep Liberty, we'll be test-fitting the Hollywood Racks Expedition, two-bike carrier trunk mount, part number hrf6-2. Now, to begin our test-fit, we'll go ahead and place the trunk mount bike rack against the cargo door. We'll then take the two top hooks, and hook them to the cargo door here at the roof line, just behind the roof. Now, with those two straps in place, we can then work around the other remaining four straps, and hook them to the cargo door. The two side straps will hook to the cargo door, just above the tail lights, and the two lower straps will hook to the cargo door just above the bumper fascia.Now, with all six straps in place, we can go ahead and work around tightening each of the straps evenly to make sure that out bike rack is secured and centered with the vehicle. Now, we've already gone ahead and made sure that we left enough room to swing out our dual arms.
Hollywood Racks Baja 3 Trunk Bike Rack Review - 2012 Jeep Liberty
Today, on this 2012 Jeep Liberty, we'll be test-fitting the Hollywood Racks Baja three-trunk Bike rack, part number hrb3. Now, to begin our test fit, we'll go ahead and place our bike rack up against the rear cargo door. Now, we've already gone ahead, and adjusted it to fit the cargo door. We'll take the two upper straps and hook them to the cargo door, between the roof and the door itself. With that done, we'll just kind of pull them snug to help them hold the bike rack in place. We can then work around for the remaining four straps, hooking the two side straps to the side of the cargo door, here just above the tail light, and to the bottom of the door, just above the rear bumper.Now, that we have all six straps in place, we'll go ahead and work our way around tightening them down, securing the bike rack to the vehicle.
Hollywood Racks Baja 2 Trunk Bike Rack Review - 2012 Jeep Liberty
Today on our 2012 Jeep Liberty, we'll be test fitting the Hollywood Racks Baja 2-bike carrier trunk mount, part number HRB2. Now to begin our test fit, we'll place our bike rack up against our cargo door, allowing it to rest on the bumper fascia. We'll then take the two top hooks and hook them to the top of the cargo door here just behind the roof. With the two top hooks in place, we can then work around for the remaining four hooks, hooking them to the side of the cargo door here just above the taillight, and to the bottom of the door just above the bumper fascia. With all six hooks in place, we'll work our way around, tightening down the straps in an even pattern to secure the bike rack to the vehicle. With our bike rack secure, we'll now go ahead and fold up the remaining strap, to give us a nice, clean look.
Yakima KingJoe Pro Trunk Bike Rack Review - 2012 Jeep Liberty
Today on our 2012 Jeep Liberty well be test fitting the Yakima King Joe Pro two bike trunk mounted bike rack, part number Y02624. To begin our test fit well place our bike rack against our cargo door. Well then take the two top straps and hook them to the door, just behind the roof line. Well go ahead and pull the straps semi-tight, just to hold the bike rack in place. Well then move down here to our side and bottom strap where well hook the hook marked side strap to the door here right next to the taillight. Now, you may need to open the door in order to get it hooked.
Yakima QuickBack 2 Bike Rack Review - 2012 Jeep Liberty
Today on our 2012 Jeep Liberty well be test fitting part number Y02621. This is the Yakima Quickback trunk mounted bike rack. Now all well need to do is place our bike rack up against our cargo door. Well then take the two top straps. Well then hook them to the door just behind the roof line. Now well go ahead and pull them snug just to hold the bike rack in place.
